DPA d:dicate™ 4041-SP Stereo Kit

3532-SP STEREO KIT WITH 4041-SP LARGE DIAPHRAGM OMNIDIRECTIONAL MICROPHONES, P48

The d:dicate™ 3532-SP is a complete state-of-the-art A-B Stereo Kit with two d:dicate™ 4041-SP Microphones. They are carefully matched within ±0.5 dB on both frequency response and sensitivity in the entire frequency bandwidth.
This A-B stereo kit is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses; for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more.

You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, these omnidirectional microphones can be angled to use as a natural equalizer. These mics are a part of the d:dicate™ Recording Microphones Series.
 
The microphone capsule

The diaphragm and housing are both made from stainless steel. This gives the capsule a unique immunity against ambient temperature variations. The precision-made back plate is placed in a quartz insulator for maximum electrical stability. This gives the MMC4041 Large Diagram Capsule a unique sensitivity of up to 90 mV/Pa.

The 4041-SP has a frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz. Furthermore, the MMC4041 Large Diaphragm Capsule has extremely low self-noise of 7 dB(A) with the MMP4000-S. It also has enhanced SPL handling capability of up to 144 dB SPL before clipping occurs.

The MMC4041 Large Diaphragm Microphone Capsule can be unscrewed from the MMP4000-SP preamplifier, which allows you to exchange the preamplifier.
Features

The product offers the following features
Handles high sound pressure levels with no distortion
Natural and transparent sound

Specifications
d:dicate™ Recording Microphones 3532-SP STEREO KIT WITH 4041-SP LARGE DIAPHRAGM OMNIDIRECTIONAL MICROPHONES, P48

Directional patternOmnidirectional
Principle of operationPressure
Cartridge typeCondenser w. stainless steel diaphragm
Frequency range20 Hz - 20 kHz
Frequency range, ±2 dB20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Sensitivity, nominal, ±2 dB at 250 Hz70 mV/Pa; -23 dB re. 1 V/Pa
Equivalent noise level, A-weightedMax. 8 dB(A) re. 20 µPa
Equivalent noise level, ITU-R BS.468-4Max. 20 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)86 dB(A)
Total harmonic distortion (THD)< 0.5% THD up to 120 dB SPL peak, < 1% THD up to 126 dB SPL peak
Dynamic rangeTyp. 118 dB
Max. SPL, peak before clipping134 dB
Output impedance< 200 Ω
Cable drive capabilityUp to 100 m (328 ft)
Power supply (for full performance)Via external power supply
Current consumption2.20 mA
Connector3-pin XLR-M (Standard P48)
Weight190 g (6.7 oz)
Capsule diameter24 mm (1 in)
Microphone length170 mm (6.7 in)
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Matching tolerance (frequency response and sensitivity)±0.5 dB
Phase deviation for kit< 5°

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.