DPA d:sign™ 4011 Cardioid Mic, Black, XLR Floor Stand

d:sign™

Floor Stand Microphone

Elegant and exclusive design

• Low noise and natural voice
• Highly directional for high isolation
• Uniform, frequency independent directionality
• Exclusive, elegant design
• Integrated shock-mounting in floor base
• Rapidly stabilizing microphone boom pole
• Modular flexibility (d:dicate™ capsules)

A complete cardioid microphone floor stand solution in the modular d:sign™ Microphone Series offering a high-quality stage voice or instrument mic.

This floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.

These floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another d:dicate™ Microphone Capsule or Preamplifier. 

d:sign™ 4011 Floor Stand Microphones

Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources. It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels.

A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.

d:sign™ 4011 Floor Stand Microphones comes in the following lengths:

d:dicate™ 4011-BX-F-075  Supercardioid Microphone, Single 77 cm (30 in) Boom, Floor Stand

d:dicate™ 4011-BX-F-120  Supercardioid Microphone, Single 122 cm (48 in) Boom, Floor Stand

d:dicate™ 4011-BX-F-120-T  Supercardioid Microphone, Twin 122 cm (48 in) Boom, Floor Stand

Specifications

• Directional pattern Cardioid
• Principle of operation Pressure gradient
• Cartridge type Pre-polarized condenser
• Frequency range 20 Hz - 20 kHz
• Frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weighted Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4 Typ. 25 dB
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 76 dB(A)
• Total harmonic distortion (THD) < 1% up to 139 dB SPL peak
• Dynamic range Typ. 121 dB
• Max. SPL, peak before clipping 144 dB
• Output impedance 100 Ω
• Minimum load impedance 2 kΩ
• Cable drive capability 100 m (328 ft)
• Output balance principle Impedance balancing
• Common mode rejection ratio (CMRR) > 40 dB
• Power supply (for full performance) 48 V Phantom power (± 4 V)
• Current consumption 3.5 mA
• Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color Matte black
• Microphone diameter 19 mm (0.75 in)
• Capsule diameter 19 mm (0.75 in)
• Microphone length Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
• Maximum output voltage, RMS 2.2 V
• Polarity +V at pin 2 for positive sound pressure
• Temperature range -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH) Up to 90%
• Matching tolerance (frequency response and sensitivity) ±1 dB
• Phase deviation for kit < 10°

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.