Preamps & Channel Strips

Sort by:
Sale
Grace Design m801 high fidelity 8 channnel mic preamplifier
Grace Design m801 high fidelity 8 channnel mic preamplifier

Microphone Preamps

$4,745.00 $4,995.00
{"id":8347148289,"title":"Grace Design m801 high fidelity 8 channnel mic preamplifier","handle":"m801-high-fidelity-8-channnel-mic-preamplifier","description":"\u003cp class=\"p1\"\u003eTransformerless, transparent microphone preamplification for all critical recording applications\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIntroduced in 1995, the model 801 microphone preamplifier was slightly ahead of its time. But as digital audio workstations soon flooded the industry, an accompanying high performance 8 channel mic preamplifier suddenly made perfect sense. So the model 801 quickly became an industry standard, which remains inimitable and unsurpassed.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eMany years later, with a nearly flawless service record and an endless supply of critical acclaim, the model 801 gets a much deserved update, including an updated audio path, a new chassis forged of stainless steel and a slightly new name: the m801.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFirst and foremost, the new m801 delivers unmatched audio performance – with massive headroom and ultra-wide bandwidth which contribute to a markedly open, musical character. The m801 is designed to effortlessly resolve even the lowest level ambient information, resulting in a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe m801’s signal path has been hot-rodded to be fully balanced from start to finish, resulting in wider dynamic range, while new higher current output drivers enable even longer cable runs without signal loss.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNow included on each channel is a dedicated ribbon microphone switch, which shifts the preamplifier’s entire gain range up 10dB, while deactivating 48V phantom power, optimizing input impedance and bypassing the decoupling capacitors. And, we’ve added an additional set of 8 channel balanced outputs for sending signals to a secondary recorder, workstation or console.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEach channel offers 48V phantom, phase reverse and a 20dB pad. Gain controls are our finest 24 position gold contact rotary switches, wired with 1% metal film resistors for maximum audio performance and perfect resetability. All components, active and passive, are selected for pure audio performance and long term reliability. No corners are cut and no compromises are made.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhile its predecessor now takes its place in pro audio history, the new m801 faithfully furthers the tradition of breathtaking audio performance and perfect reliability in a beautiful, functional 8 channel package.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli class=\"bullets\"\u003efully balanced, transformerless design\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eall new, higher-current outputs drive even longer cable runs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eribbon mic mode switch on each channel\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003efast, musical transimpedance amplifier architecture\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eprecision 24 position gold contact rotary switch gain controls\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48V phantom power, 20 dB pad and phase reverse\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eno electrolytic capacitors in the signal path\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003esealed gold contact relays for all signal switching\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eall electrical and mechanical design elements maximized for absolute purist, audiophile\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eperformance\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003elarge two color LED peak indicator\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eregulated linear power supply with custom wound toroidal transformer\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003ehighest quality metal film resistors used throughout\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e20 year EON transferable warranty on parts and labor\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"833\" border=\"0\" align=\"center\" cellpadding=\"0\" cellspacing=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eFREQUENCY RESPONSE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"418\" class=\"specs\"\u003e@ 40dB gain 3dB 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd width=\"348\" class=\"specsLeft\"\u003e4.5Hz-350KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 40dB gain 0.2dB 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e18Hz-65KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eTHD+N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 20dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0008%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 40dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0009%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 60dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0070%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eINTERMODULATION DISTORTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@40dB gain +20dBu out\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\n\u003cdiv align=\"right\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eSMPTE\/DIN 1:1 (50Hz, 7kHz)\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0020%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eSMPTE\/DIN 4:1 (50Hz, 7kHz)\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0030%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eNOISE - REFERRED TO INPUT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-130dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 150\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-127dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 600\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-123dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePHASE DEVIATION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e100-20KHz @40dB gain\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eCROSSTALK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eAny Channel @40dB gain 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-140dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eAny Channel @40dB gain 10kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-130dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eCMRR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain, 3.5Vcm, 1KHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026gt;70dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain, 3.5Vcm, 10KHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026gt;70dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePHANTOM POWER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eVoltage +48V\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+0.9\/ -0.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e6.8k\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e resistor match tolerance\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+\/- 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eMAXIMUM OUTPUT LEVEL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e1kHz, 100KOhm load\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+28dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eIMPEDANCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eInput\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eInput, ribbon mode\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e20KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eOutput\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e190Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eDIMENSIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e15lbs (6.8kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003em801 POWER SUPPLY SPECIFICATIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePOWER CONSUMPTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e100-240VAC 50\/60Hz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e60 Watts max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eDIMENSIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e6.25lbs (2.8kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e1.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-10-29T07:25:00+02:00","created_at":"2016-10-29T07:42:14+02:00","vendor":"Grace Design","type":"Microphone Preamps","tags":["Grace Design","Preamps","Preamps \u0026 Channel Strips","Price Range_$3000 and Over","Shop by brand_Grace Design","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording"],"price":474500,"price_min":474500,"price_max":474500,"available":true,"price_varies":false,"compare_at_price":499500,"compare_at_price_min":499500,"compare_at_price_max":499500,"compare_at_price_varies":false,"variants":[{"id":28056046017,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AM801","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Grace Design m801 high fidelity 8 channnel mic preamplifier","public_title":null,"options":["Default Title"],"price":474500,"weight":6804,"compare_at_price":499500,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/m801_main.jpg?v=1477720318","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Grace_m801_inside.jpg?v=1477720324","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/m801_backpanel.jpg?v=1477720345","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/m801_detail2.jpg?v=1477720351"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/m801_main.jpg?v=1477720318","options":["Title"],"content":"\u003cp class=\"p1\"\u003eTransformerless, transparent microphone preamplification for all critical recording applications\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIntroduced in 1995, the model 801 microphone preamplifier was slightly ahead of its time. But as digital audio workstations soon flooded the industry, an accompanying high performance 8 channel mic preamplifier suddenly made perfect sense. So the model 801 quickly became an industry standard, which remains inimitable and unsurpassed.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eMany years later, with a nearly flawless service record and an endless supply of critical acclaim, the model 801 gets a much deserved update, including an updated audio path, a new chassis forged of stainless steel and a slightly new name: the m801.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFirst and foremost, the new m801 delivers unmatched audio performance – with massive headroom and ultra-wide bandwidth which contribute to a markedly open, musical character. The m801 is designed to effortlessly resolve even the lowest level ambient information, resulting in a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe m801’s signal path has been hot-rodded to be fully balanced from start to finish, resulting in wider dynamic range, while new higher current output drivers enable even longer cable runs without signal loss.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNow included on each channel is a dedicated ribbon microphone switch, which shifts the preamplifier’s entire gain range up 10dB, while deactivating 48V phantom power, optimizing input impedance and bypassing the decoupling capacitors. And, we’ve added an additional set of 8 channel balanced outputs for sending signals to a secondary recorder, workstation or console.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eEach channel offers 48V phantom, phase reverse and a 20dB pad. Gain controls are our finest 24 position gold contact rotary switches, wired with 1% metal film resistors for maximum audio performance and perfect resetability. All components, active and passive, are selected for pure audio performance and long term reliability. No corners are cut and no compromises are made.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhile its predecessor now takes its place in pro audio history, the new m801 faithfully furthers the tradition of breathtaking audio performance and perfect reliability in a beautiful, functional 8 channel package.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli class=\"bullets\"\u003efully balanced, transformerless design\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eall new, higher-current outputs drive even longer cable runs\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eribbon mic mode switch on each channel\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003efast, musical transimpedance amplifier architecture\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eprecision 24 position gold contact rotary switch gain controls\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e48V phantom power, 20 dB pad and phase reverse\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eno electrolytic capacitors in the signal path\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003esealed gold contact relays for all signal switching\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eall electrical and mechanical design elements maximized for absolute purist, audiophile\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eperformance\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003elarge two color LED peak indicator\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003eregulated linear power supply with custom wound toroidal transformer\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003ehighest quality metal film resistors used throughout\u003c\/li\u003e\n\u003cli class=\"bullets\"\u003e20 year EON transferable warranty on parts and labor\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"833\" border=\"0\" align=\"center\" cellpadding=\"0\" cellspacing=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eFREQUENCY RESPONSE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"418\" class=\"specs\"\u003e@ 40dB gain 3dB 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd width=\"348\" class=\"specsLeft\"\u003e4.5Hz-350KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 40dB gain 0.2dB 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e18Hz-65KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eTHD+N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 20dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0008%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 40dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0009%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@ 60dB gain +20dBu out, 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0070%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eINTERMODULATION DISTORTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@40dB gain +20dBu out\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\n\u003cdiv align=\"right\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eSMPTE\/DIN 1:1 (50Hz, 7kHz)\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0020%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eSMPTE\/DIN 4:1 (50Hz, 7kHz)\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;.0030%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eNOISE - REFERRED TO INPUT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 50\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-130dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 150\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-127dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain 600\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e source\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-123dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePHASE DEVIATION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e100-20KHz @40dB gain\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026lt;3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eCROSSTALK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eAny Channel @40dB gain 1kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-140dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eAny Channel @40dB gain 10kHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e-130dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eCMRR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain, 3.5Vcm, 1KHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026gt;70dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e@60dB gain, 3.5Vcm, 10KHz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e\u0026gt;70dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePHANTOM POWER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eVoltage +48V\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+0.9\/ -0.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e6.8k\u003cspan class=\"specsLeft\"\u003eΩ\u003c\/span\u003e resistor match tolerance\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+\/- 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eMAXIMUM OUTPUT LEVEL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e1kHz, 100KOhm load\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e+28dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eIMPEDANCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eInput\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8100Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eInput, ribbon mode\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e20KΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eOutput\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e190Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eDIMENSIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e15lbs (6.8kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003em801 POWER SUPPLY SPECIFICATIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003ePOWER CONSUMPTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003e100-240VAC 50\/60Hz\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e60 Watts max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr bgcolor=\"#D3D3D3\" class=\"specs\"\u003e\n\u003ctd colspan=\"2\"\u003eDIMENSIONS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e6.25lbs (2.8kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e1.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"specs\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"specsLeft\"\u003e8.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Grace Design m801 high fidelity 8 channnel mic preamplifier

Grace Design m801 high fidelity 8 channnel mic preamplifier

$4,745.00

Transformerless, transparent microphone preamplification for all critical recording applications Introduced in 1995, the model 801 microphone preamplifier was slightly ahead of its time. But as digital audio workstations soon flooded the industry, an accompanying high performance 8 channel mic preamplifier suddenly made perfect sense. So the mod...


More Info
{"id":8436046029,"title":"Rupert Neve Designs R6 Rack Ears","handle":"r6-rack-mount-kit","description":"\u003cbr\u003eR6 - Rupert Neve Designs 500 Series Rack\u003cbr\u003e\u003cbr\u003eWith abundant power and versatile connections, the R6 delivers peace of mind for engineers who demand a higher degree of confidence in their 500 series racks.\u003cbr\u003e\u003cbr\u003ePower You Can Trust\u003cbr\u003e\u003cbr\u003ePower-wise, the R6 has more than 150% the required current for a 6-space chassis to prevent the power rails from failing under a higher-than-expected load. To help monitor and troubleshoot problematic modules, the R6 is equipped with LED current metering to show how much power is being used. The internal power supply itself has been carefully designed and double-shielded to avoid significant magnetic induction in any of the channel positions. With such attention to providing and monitoring power, the R6 helps your modules realize their fullest potential.\u003cbr\u003eConnect Like Never Before\u003cbr\u003e\u003cbr\u003eWith a plethora of connections available, the R6 backpanel is practically a patchbay on its own. The R6 features 8 channels of balanced I\/O options including DB-25, XLR and TRS that may be used interchangeably. This versatility is especially handy when you are taking the R6 with you to another environment where you are unsure of the cables available, or if you need to convert DB-25, XLR or TRS connections to another format using the THRU functionality on channels 7-8.\u003cbr\u003eSolid Steel Construction\u003cbr\u003e\u003cbr\u003eThe chassis is comprised of solid steel with bumpers to support the unit in both horizontal and vertical configurations, and features a collapsable handle for portability. All connectors and fittings are of the highest quality to ensure that the R6 will hold up to many years of use.\u003cbr\u003eA New Level of Confidence in the 500 Series\u003cbr\u003e\u003cbr\u003eBecause the R6 is built to 500 series specifications, it will work flawlessly with any properly-designed 500 series module you wish to include in it. To help accommodate modules that are slightly out of spec, the R6 has variable-position screw holes to help make the installation process as smooth as possible. The 500 series link function can be enabled in pairs on the R6 using the link jumpers on Channels 1-2, 3-4, or 5-6. Matching blank panels are also available to cover any empty slots.\u003cbr\u003e\u003cbr\u003eIf you want to get the very best performance out of your 500 series modules, the Rupert Neve Designs R6 is the serious rack for the serious sound you want.\u003cbr\u003eOptional R6 Rack Kit\u003cbr\u003e\u003cbr\u003eTo mount the R6 into a standard 19\" rack frame, there is a rack kit available for R6 racks with serial numbers higher than 250 (shipped after June 2015). When the bottom feet are removed, the R6 takes up 3U of rack space.\u003cbr\u003e500 Series Blank Panel\u003cbr\u003e\u003cbr\u003eTo fill gaps in the R6, the 510: Blank Panel can be used to create a more seamless look.\u003cbr\u003e\u003cbr\u003e510-blank-plate\u003cbr\u003eMassive Connectivity\u003cbr\u003e\u003cbr\u003eInterchangeable XLR, TRS, and DB-25 I\/O connections are provided to ensure that you can connect wherever you go with the backpanel patchbay\u003cbr\u003eSerious Power\u003cbr\u003e\u003cbr\u003eEven with modules that overdraw the 500 series specification, the R6 has the reserve power to maintain the voltage\u003cbr\u003ePower Monitoring\u003cbr\u003e\u003cbr\u003eAn LED Meter monitors the R6 current usage to ensure that you never run short on power. This meter can also be useful for troubleshooting a module that is severely overdrawing its allotment\u003cbr\u003eChannel 7-8 Thru Conversion\u003cbr\u003e\u003cbr\u003eThe channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from\/to DB-25, XLR, and TRS connectors\u003cbr\u003e48V Phantom Supply\u003cbr\u003e\u003cbr\u003eProvide rock-solid phantom power to your microphones with the R6’s robust 48V buss\u003cbr\u003e\"Built For The Road\" Frame\u003cbr\u003e\u003cbr\u003eA solid steel enclosure, two sets of rugged rubber feet for horizontal and vertical mounting and a collapsible handle make the R6 completely portable and ready for the road\u003cbr\u003eDC Voltage to Units\u003cbr\u003e\u003cbr\u003e+\/-16VDC and +48VDC for phantom power\u003cbr\u003eMax Current\u003cbr\u003e\u003cbr\u003e1000mA for modules, 150mA for 48V phantom power\u003cbr\u003ePower Requirements\u003cbr\u003e\u003cbr\u003e100-240VAC, 50\/60Hz, 50 Watts\u003cbr\u003eWeight\u003cbr\u003e\u003cbr\u003e9.5lbs\u003cbr\u003eDimensions\u003cbr\u003e\u003cbr\u003e13” long x 7.5”wide x 5.5” high","published_at":"2016-11-12T19:08:00+02:00","created_at":"2016-11-12T19:12:33+02:00","vendor":"Rupert Neve Designs","type":"500 Series","tags":["Channel Strips \u0026 Preamps","Preamp Accessories","Price Range_$50 to $100","Pro Audio","Recording","Rupert Neve Designs","Rupert Neve Designs 820-00086","Shop by brand_Rupert Neve Designs","Shop by category_500 Series","Shop by category_Channel Strips","Shop by category_Preamp Accessories","Shop by category_Preamps"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":8000,"compare_at_price_min":8000,"compare_at_price_max":8000,"compare_at_price_varies":false,"variants":[{"id":28462545805,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R6 Rack Ears","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rupert Neve Designs R6 Rack Ears","public_title":null,"options":["Default Title"],"price":8000,"weight":0,"compare_at_price":8000,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"752423657339"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-kit-1800x1260.jpg?v=1528074404","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-ears-straight-1800x666.jpg?v=1528074404","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-8-1024x553.jpg?v=1528074404","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-10-1024x463.jpg?v=1528074404","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack--1024x602.jpg?v=1528074404","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-5-1024x614.jpg?v=1528074404"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/r6-rack-kit-1800x1260.jpg?v=1528074404","options":["Title"],"content":"\u003cbr\u003eR6 - Rupert Neve Designs 500 Series Rack\u003cbr\u003e\u003cbr\u003eWith abundant power and versatile connections, the R6 delivers peace of mind for engineers who demand a higher degree of confidence in their 500 series racks.\u003cbr\u003e\u003cbr\u003ePower You Can Trust\u003cbr\u003e\u003cbr\u003ePower-wise, the R6 has more than 150% the required current for a 6-space chassis to prevent the power rails from failing under a higher-than-expected load. To help monitor and troubleshoot problematic modules, the R6 is equipped with LED current metering to show how much power is being used. The internal power supply itself has been carefully designed and double-shielded to avoid significant magnetic induction in any of the channel positions. With such attention to providing and monitoring power, the R6 helps your modules realize their fullest potential.\u003cbr\u003eConnect Like Never Before\u003cbr\u003e\u003cbr\u003eWith a plethora of connections available, the R6 backpanel is practically a patchbay on its own. The R6 features 8 channels of balanced I\/O options including DB-25, XLR and TRS that may be used interchangeably. This versatility is especially handy when you are taking the R6 with you to another environment where you are unsure of the cables available, or if you need to convert DB-25, XLR or TRS connections to another format using the THRU functionality on channels 7-8.\u003cbr\u003eSolid Steel Construction\u003cbr\u003e\u003cbr\u003eThe chassis is comprised of solid steel with bumpers to support the unit in both horizontal and vertical configurations, and features a collapsable handle for portability. All connectors and fittings are of the highest quality to ensure that the R6 will hold up to many years of use.\u003cbr\u003eA New Level of Confidence in the 500 Series\u003cbr\u003e\u003cbr\u003eBecause the R6 is built to 500 series specifications, it will work flawlessly with any properly-designed 500 series module you wish to include in it. To help accommodate modules that are slightly out of spec, the R6 has variable-position screw holes to help make the installation process as smooth as possible. The 500 series link function can be enabled in pairs on the R6 using the link jumpers on Channels 1-2, 3-4, or 5-6. Matching blank panels are also available to cover any empty slots.\u003cbr\u003e\u003cbr\u003eIf you want to get the very best performance out of your 500 series modules, the Rupert Neve Designs R6 is the serious rack for the serious sound you want.\u003cbr\u003eOptional R6 Rack Kit\u003cbr\u003e\u003cbr\u003eTo mount the R6 into a standard 19\" rack frame, there is a rack kit available for R6 racks with serial numbers higher than 250 (shipped after June 2015). When the bottom feet are removed, the R6 takes up 3U of rack space.\u003cbr\u003e500 Series Blank Panel\u003cbr\u003e\u003cbr\u003eTo fill gaps in the R6, the 510: Blank Panel can be used to create a more seamless look.\u003cbr\u003e\u003cbr\u003e510-blank-plate\u003cbr\u003eMassive Connectivity\u003cbr\u003e\u003cbr\u003eInterchangeable XLR, TRS, and DB-25 I\/O connections are provided to ensure that you can connect wherever you go with the backpanel patchbay\u003cbr\u003eSerious Power\u003cbr\u003e\u003cbr\u003eEven with modules that overdraw the 500 series specification, the R6 has the reserve power to maintain the voltage\u003cbr\u003ePower Monitoring\u003cbr\u003e\u003cbr\u003eAn LED Meter monitors the R6 current usage to ensure that you never run short on power. This meter can also be useful for troubleshooting a module that is severely overdrawing its allotment\u003cbr\u003eChannel 7-8 Thru Conversion\u003cbr\u003e\u003cbr\u003eThe channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from\/to DB-25, XLR, and TRS connectors\u003cbr\u003e48V Phantom Supply\u003cbr\u003e\u003cbr\u003eProvide rock-solid phantom power to your microphones with the R6’s robust 48V buss\u003cbr\u003e\"Built For The Road\" Frame\u003cbr\u003e\u003cbr\u003eA solid steel enclosure, two sets of rugged rubber feet for horizontal and vertical mounting and a collapsible handle make the R6 completely portable and ready for the road\u003cbr\u003eDC Voltage to Units\u003cbr\u003e\u003cbr\u003e+\/-16VDC and +48VDC for phantom power\u003cbr\u003eMax Current\u003cbr\u003e\u003cbr\u003e1000mA for modules, 150mA for 48V phantom power\u003cbr\u003ePower Requirements\u003cbr\u003e\u003cbr\u003e100-240VAC, 50\/60Hz, 50 Watts\u003cbr\u003eWeight\u003cbr\u003e\u003cbr\u003e9.5lbs\u003cbr\u003eDimensions\u003cbr\u003e\u003cbr\u003e13” long x 7.5”wide x 5.5” high"}
Rupert Neve Designs R6 Rack Ears

Rupert Neve Designs R6 Rack Ears

$80.00

R6 - Rupert Neve Designs 500 Series RackWith abundant power and versatile connections, the R6 delivers peace of mind for engineers who demand a higher degree of confidence in their 500 series racks.Power You Can TrustPower-wise, the R6 has more than 150% the required current for a 6-space chassis to prevent the power rails from failing under a h...


More Info
Chandler Limited TG2

Amplifier

$2,315.00
{"id":10468134413,"title":"Chandler Limited TG2","handle":"chandler-limited-tg2-pre-amp-di-share","description":"\u003ch1 id=\"reader-title\"\u003eTG2 Pre Amp\/DI | Chandler Limited\u003c\/h1\u003e\n\u003cp\u003eThe Chandler Limited TG2 Pre Amp\/DI is a recreation of the rare EMI TG12428 pre amp used in EMI\/Abbey Road recording and mastering consoles in the late 60s and early 70s. The sound was used on many famous recordings done at Abbey Road including The Beatles \"Abbey Road\" and Pink Floyd \"Dark Side of the Moon.\"\u003c\/p\u003e\n\u003cp\u003eThis microphone pre-amplifier features the same discrete transformer balanced amplifiers as the TG series limiter and offers a creamy, smooth tone with a surprisingly open, clear top end. The sound, as explained by many users, has \"warmth\" and punch, but with a \"beautiful\" expanded top end. In fact the unit does have a small rise in its top end frequency response and some warmth inducing distortion which contribute to its sound.\u003c\/p\u003e\n\u003cp\u003eOptions: Stepped Output (Stereo)\u003c\/p\u003e\n\u003cp\u003eAll TG units require and function on the PSU-1, Chandler Limited power supply. The PSU-1 has an internal switch for setting voltage to 120V or 220V (115V\/230V). For more information please call us at (319) 885-4200.\u003c\/p\u003e\n\u003cp\u003e*Please note: Not all of the early Abbey Road TG2 Pre Amp\/DI units have the \"impedance\" as a standard feature of the unit. If buying a used unit, please inquire as to whether the unit is equipped with the impedance before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ccite\u003eSpecifications\u003c\/cite\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCHANNELS: Dual Mono\u003c\/p\u003e\n\u003cp\u003eCIRCUIT: Discrete, Transistor\u003c\/p\u003e\n\u003cp\u003eGain: +5db to +75db\u003cbr\u003e Input Impedance: 1200 to 300 Ohm\u003c\/p\u003e\n\u003cp\u003eCONNECTIONS\u003cbr\u003e I\/O: XLR, Transformer Balanced, Pin 2 Hot\u003cbr\u003e DI, 1\/4\" Unbalanced, 100k input impedance\u003cbr\u003e All Connections Transformer Balanced Pin 2 Hot\u003c\/p\u003e\n\u003cp\u003ePOWER\u003cbr\u003e Phantom Power: +48v\u003cbr\u003e Power: ±28v\u003cbr\u003e Requires Chandler Limited PSU-1 MKII power supply.\u003c\/p\u003e","published_at":"2018-08-11T20:50:11+02:00","created_at":"2017-07-19T16:23:01+02:00","vendor":"Chandler Limited","type":"Amplifier","tags":["Chandler Limited","Chandler TG2","Channel Strips \u0026 Preamps","Microphone Preamps","Preamps","Preamps \u0026 Channel Strips","Price Range_$2000 to $3000","Pro Audio","Recording","Shop by brand_Chandler Limited","Shop by category_Channel Strips","Shop by category_Preamps","Shop by category_Preamps \u0026 Channel Strips","Shop by category_Studio \u0026 Recording","Studio \u0026 Recording"],"price":231500,"price_min":231500,"price_max":231500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40612070349,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TG2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Chandler Limited TG2","public_title":null,"options":["Default Title"],"price":231500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_tg2_pre_amp_front.jpg?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Video-logo-black_4_2a49d05d-48b8-4d9e-a076-68ea489df529.png?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_tg2_pre_amp_front_rt_angle.jpg?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_tg2_pre_amp_front_lft_angle.jpg?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_tg2_pre_amp_rear.jpg?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_tg2_pre_amp_di_03.png?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_tg2_pre_amp_di_04.png?v=1534089472","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_tg2_pre_amp_di_05.png?v=1534089472"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_tg2_pre_amp_front.jpg?v=1534089472","options":["Title"],"content":"\u003ch1 id=\"reader-title\"\u003eTG2 Pre Amp\/DI | Chandler Limited\u003c\/h1\u003e\n\u003cp\u003eThe Chandler Limited TG2 Pre Amp\/DI is a recreation of the rare EMI TG12428 pre amp used in EMI\/Abbey Road recording and mastering consoles in the late 60s and early 70s. The sound was used on many famous recordings done at Abbey Road including The Beatles \"Abbey Road\" and Pink Floyd \"Dark Side of the Moon.\"\u003c\/p\u003e\n\u003cp\u003eThis microphone pre-amplifier features the same discrete transformer balanced amplifiers as the TG series limiter and offers a creamy, smooth tone with a surprisingly open, clear top end. The sound, as explained by many users, has \"warmth\" and punch, but with a \"beautiful\" expanded top end. In fact the unit does have a small rise in its top end frequency response and some warmth inducing distortion which contribute to its sound.\u003c\/p\u003e\n\u003cp\u003eOptions: Stepped Output (Stereo)\u003c\/p\u003e\n\u003cp\u003eAll TG units require and function on the PSU-1, Chandler Limited power supply. The PSU-1 has an internal switch for setting voltage to 120V or 220V (115V\/230V). For more information please call us at (319) 885-4200.\u003c\/p\u003e\n\u003cp\u003e*Please note: Not all of the early Abbey Road TG2 Pre Amp\/DI units have the \"impedance\" as a standard feature of the unit. If buying a used unit, please inquire as to whether the unit is equipped with the impedance before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ccite\u003eSpecifications\u003c\/cite\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCHANNELS: Dual Mono\u003c\/p\u003e\n\u003cp\u003eCIRCUIT: Discrete, Transistor\u003c\/p\u003e\n\u003cp\u003eGain: +5db to +75db\u003cbr\u003e Input Impedance: 1200 to 300 Ohm\u003c\/p\u003e\n\u003cp\u003eCONNECTIONS\u003cbr\u003e I\/O: XLR, Transformer Balanced, Pin 2 Hot\u003cbr\u003e DI, 1\/4\" Unbalanced, 100k input impedance\u003cbr\u003e All Connections Transformer Balanced Pin 2 Hot\u003c\/p\u003e\n\u003cp\u003ePOWER\u003cbr\u003e Phantom Power: +48v\u003cbr\u003e Power: ±28v\u003cbr\u003e Requires Chandler Limited PSU-1 MKII power supply.\u003c\/p\u003e"}
Chandler Limited TG2

Chandler Limited TG2

$2,315.00

TG2 Pre Amp/DI | Chandler Limited The Chandler Limited TG2 Pre Amp/DI is a recreation of the rare EMI TG12428 pre amp used in EMI/Abbey Road recording and mastering consoles in the late 60s and early 70s. The sound was used on many famous recordings done at Abbey Road including The Beatles "Abbey Road" and Pink Floyd "Dark Side of the Moon." Thi...


More Info
Chandler Limited LTD-1

Preamps

$2,575.00
{"id":10468217997,"title":"Chandler Limited LTD-1","handle":"chandler-limited-ltd-1-eq-pre-amp","description":"\u003ch1 id=\"reader-title\"\u003eLTD-1 EQ\/Pre Amp | Chandler Limited\u003c\/h1\u003e\n\u003cp\u003eThe Chandler Limited LTD-1 is a hand wired and handmade 10-series equalizer and pre amp using parts and build techniques from the original manufacture of the modules. Grounding, wiring techniques, original transformers, transistors, and inductors have been used to attribute to the special sound in each LTD-1.\u003c\/p\u003e\n\u003cp\u003eIn addition to the classic 10-series sound we added all the modern functions you would expect and expanded the EQ section giving a much larger palate to choose from. Features include high impedance direct in, 48v switching, output fader, EQ in\/out, phase reverse, balanced mic in, balanced line in, overbuilt power supply to ensure maximum headroom, and nine additional EQ points.\u003c\/p\u003e\n\u003cp\u003eAll LTD units require and function on the PSU-1, Chandler Limited power supply. The PSU-1 has an internal switch for setting voltage to 120V or 220V (115V\/230V). For more information please call us at (319) 885-4200.\u003c\/p\u003e\n\u003cp\u003eNOTE: Early LTD-1 units used a Neutrik style input receptacle for the DI connection, as seen in pictures on this page. Current models feature a standard 1\/4\" input jack. This has no effect on the sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ccite\u003eSpecifications\u003c\/cite\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCHANNELS: Mono\u003c\/p\u003e\n\u003cp\u003eCIRCUIT: Discrete, Transistor\u003c\/p\u003e\n\u003cp\u003eMic Input: -20db to -80db, 5db increments\u003cbr\u003e Line Input: +10db to -20db\u003c\/p\u003e\n\u003cp\u003eCONNECTIONS\u003cbr\u003e I\/O: XLR, Transformer Balanced, Pin 2 Hot\u003cbr\u003e DI, 1\/4\" Unbalanced, 100k input impedance\u003c\/p\u003e\n\u003cp\u003ePOWER\u003cbr\u003e Phantom Power: +48v\u003cbr\u003e Power: ±28v\u003cbr\u003e Requires the Chandler Limited PSU-1 MKII power supply\u003c\/p\u003e","published_at":"2018-08-11T20:50:12+02:00","created_at":"2017-07-19T16:54:43+02:00","vendor":"Chandler Limited","type":"Preamps","tags":["Chandler Limited","Channel Strips","Preamps \u0026 Channel Strips","Price Range_$2000 to $3000","Shop by brand_Chandler Limited","Shop by category_Channel Strips","Shop by category_Preamps","Shop by category_Preamps \u0026 Channel Strips","Shop by category_Studio Monitors","Studio \u0026 Recording"],"price":257500,"price_min":257500,"price_max":257500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40612346125,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LTD-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Chandler Limited LTD-1","public_title":null,"options":["Default Title"],"price":257500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_ltd_1_eq_pre_amp_front.jpg?v=1534072694","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_ltd_1_eq_pre_amp_angle_2.jpg?v=1534072694","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_limited_ltd_1_eq_pre_amp_angle_1.jpg?v=1534072694","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_ltd_1_eq_pre_amp_02.png?v=1534072694","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_ltd_1_eq_pre_amp_04.png?v=1534072694","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_ltd_1_eq_pre_amp_05.png?v=1534072694"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/chandler_ltd_1_eq_pre_amp_front.jpg?v=1534072694","options":["Title"],"content":"\u003ch1 id=\"reader-title\"\u003eLTD-1 EQ\/Pre Amp | Chandler Limited\u003c\/h1\u003e\n\u003cp\u003eThe Chandler Limited LTD-1 is a hand wired and handmade 10-series equalizer and pre amp using parts and build techniques from the original manufacture of the modules. Grounding, wiring techniques, original transformers, transistors, and inductors have been used to attribute to the special sound in each LTD-1.\u003c\/p\u003e\n\u003cp\u003eIn addition to the classic 10-series sound we added all the modern functions you would expect and expanded the EQ section giving a much larger palate to choose from. Features include high impedance direct in, 48v switching, output fader, EQ in\/out, phase reverse, balanced mic in, balanced line in, overbuilt power supply to ensure maximum headroom, and nine additional EQ points.\u003c\/p\u003e\n\u003cp\u003eAll LTD units require and function on the PSU-1, Chandler Limited power supply. The PSU-1 has an internal switch for setting voltage to 120V or 220V (115V\/230V). For more information please call us at (319) 885-4200.\u003c\/p\u003e\n\u003cp\u003eNOTE: Early LTD-1 units used a Neutrik style input receptacle for the DI connection, as seen in pictures on this page. Current models feature a standard 1\/4\" input jack. This has no effect on the sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ccite\u003eSpecifications\u003c\/cite\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCHANNELS: Mono\u003c\/p\u003e\n\u003cp\u003eCIRCUIT: Discrete, Transistor\u003c\/p\u003e\n\u003cp\u003eMic Input: -20db to -80db, 5db increments\u003cbr\u003e Line Input: +10db to -20db\u003c\/p\u003e\n\u003cp\u003eCONNECTIONS\u003cbr\u003e I\/O: XLR, Transformer Balanced, Pin 2 Hot\u003cbr\u003e DI, 1\/4\" Unbalanced, 100k input impedance\u003c\/p\u003e\n\u003cp\u003ePOWER\u003cbr\u003e Phantom Power: +48v\u003cbr\u003e Power: ±28v\u003cbr\u003e Requires the Chandler Limited PSU-1 MKII power supply\u003c\/p\u003e"}
Chandler Limited LTD-1

Chandler Limited LTD-1

$2,575.00

LTD-1 EQ/Pre Amp | Chandler Limited The Chandler Limited LTD-1 is a hand wired and handmade 10-series equalizer and pre amp using parts and build techniques from the original manufacture of the modules. Grounding, wiring techniques, original transformers, transistors, and inductors have been used to attribute to the special sound in each LTD-1. ...


More Info
Rupert Neve Designs RMP-D8

Preamps

$5,995.00
{"id":690319622190,"title":"Rupert Neve Designs RMP-D8","handle":"rupert-neve-designs-rmp-d8","description":"\u003cp\u003eRMP-D8\u003c\/p\u003e\n\u003cp\u003e8-Channel Remote Control Dante Mic Pre\u003c\/p\u003e\n\u003cp\u003eOverview\u003c\/p\u003e\n\u003cp\u003eThe massive weight \u0026amp; tone of classic Rupert Neve Designs studio microphone preamps: now available for your stage.\u003c\/p\u003e\n\u003cp\u003eFor the last decade, the world’s leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. With mastering-grade 24-bit 192 Khz converters and full Dante integration, the RMP-D8 finally offers the live sound world something that studios have always coveted: the sound of Rupert Neve Designs.\u003c\/p\u003e\n\u003cp\u003eRupert Neve Designs RMP-D8 Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-channel Dante remote-control microphone preamp\u003c\/li\u003e\n\u003cli\u003e8 mic\/line inputs with 48V phantom power, polarity reverse, input pad, and highpass filter\u003c\/li\u003e\n\u003cli\u003e1dB-stepped, remotely controllable Class A mic preamplifiers with 60dB of gain\u003c\/li\u003e\n\u003cli\u003eCustom Rupert Neve Designs transformers for the larger-than-life sound of Rupert's classic module designs\u003c\/li\u003e\n\u003cli\u003eMastering-grade 24-bit\/792kHz converters with precision-controlled internal clocking and enhanced jitter reduction\u003c\/li\u003e\n\u003cli\u003eRobust redundant power supplies capable of worldwide operation\u003c\/li\u003e\n\u003cli\u003eDante integration with redundant network ports for maximum reliability\u003c\/li\u003e\n\u003cli\u003eGain-compensated secondary output option with ±72dB range\u003c\/li\u003e\n\u003cli\u003e4 dual-channel AES outputs on XLR connectors\u003c\/li\u003e\n\u003cli\u003eLarge OLEO display with full local control; accurate, easy-to-read meters\u003c\/li\u003e\n\u003cli\u003eComplete integration with Dante Virtual Soundcard and Dante Via for direct computer input\u003c\/li\u003e\n\u003cli\u003eRugged, reinforced-steel chassis for enhanced RF shielding and use in challenging tour environments\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-05-27T05:08:53+02:00","created_at":"2018-05-27T06:09:15+02:00","vendor":"Rupert Neve Designs","type":"Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$3000 and Over","Rupert Neve Designs","Shop by category_Preamps","Shop by category_Preamps \u0026 Channel Strips","Shop by category_Studio \u0026 Recording","Studio \u0026 Recording"],"price":599500,"price_min":599500,"price_max":599500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7893312503854,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RMP-D8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rupert Neve Designs RMP-D8","public_title":null,"options":["Default Title"],"price":599500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"752423657421"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-9-1024x399.jpg?v=1527394764","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Video-logo-black_4_add31bbe-7f24-442c-bed5-5d47a6256f5a.png?v=1527399342","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-11-1024x356.jpg?v=1527394848","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-live-1-1024x683.jpg?v=1527395311","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-live-3-1024x618.jpg?v=1527395426","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-live-1-2-1024x683.jpg?v=1527395715","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-12-1024x680.jpg?v=1527396338","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-5-1024x683.jpg?v=1527396633","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-3-1024x683.jpg?v=1527397884","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-2-1024x527.jpg?v=1527398462","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-9-1024x399_0969f333-d95d-4869-93d1-18a29ccc0b54.jpg?v=1527399033","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-11-1024x356_a2b85a9a-1035-41b1-a54a-f023a6e7124b.jpg?v=1527399309"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/RMP-d8-9-1024x399.jpg?v=1527394764","options":["Title"],"content":"\u003cp\u003eRMP-D8\u003c\/p\u003e\n\u003cp\u003e8-Channel Remote Control Dante Mic Pre\u003c\/p\u003e\n\u003cp\u003eOverview\u003c\/p\u003e\n\u003cp\u003eThe massive weight \u0026amp; tone of classic Rupert Neve Designs studio microphone preamps: now available for your stage.\u003c\/p\u003e\n\u003cp\u003eFor the last decade, the world’s leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. With mastering-grade 24-bit 192 Khz converters and full Dante integration, the RMP-D8 finally offers the live sound world something that studios have always coveted: the sound of Rupert Neve Designs.\u003c\/p\u003e\n\u003cp\u003eRupert Neve Designs RMP-D8 Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-channel Dante remote-control microphone preamp\u003c\/li\u003e\n\u003cli\u003e8 mic\/line inputs with 48V phantom power, polarity reverse, input pad, and highpass filter\u003c\/li\u003e\n\u003cli\u003e1dB-stepped, remotely controllable Class A mic preamplifiers with 60dB of gain\u003c\/li\u003e\n\u003cli\u003eCustom Rupert Neve Designs transformers for the larger-than-life sound of Rupert's classic module designs\u003c\/li\u003e\n\u003cli\u003eMastering-grade 24-bit\/792kHz converters with precision-controlled internal clocking and enhanced jitter reduction\u003c\/li\u003e\n\u003cli\u003eRobust redundant power supplies capable of worldwide operation\u003c\/li\u003e\n\u003cli\u003eDante integration with redundant network ports for maximum reliability\u003c\/li\u003e\n\u003cli\u003eGain-compensated secondary output option with ±72dB range\u003c\/li\u003e\n\u003cli\u003e4 dual-channel AES outputs on XLR connectors\u003c\/li\u003e\n\u003cli\u003eLarge OLEO display with full local control; accurate, easy-to-read meters\u003c\/li\u003e\n\u003cli\u003eComplete integration with Dante Virtual Soundcard and Dante Via for direct computer input\u003c\/li\u003e\n\u003cli\u003eRugged, reinforced-steel chassis for enhanced RF shielding and use in challenging tour environments\u003c\/li\u003e\n\u003c\/ul\u003e"}
Rupert Neve Designs RMP-D8

Rupert Neve Designs RMP-D8

$5,995.00

RMP-D8 8-Channel Remote Control Dante Mic Pre Overview The massive weight & tone of classic Rupert Neve Designs studio microphone preamps: now available for your stage. For the last decade, the world’s leading live sound engineers have chosen Rupert Neve Designs as some of the only analog equipment to accompany their digital touring rigs. Wi...


More Info
Antelope Edge Strip

Preamps

$1,222.00
{"id":527340175406,"title":"Antelope Edge Strip","handle":"antelope-edge-strip","description":"\u003cp\u003eIntroducing the new Edge Strip — an all-in-one solution for high-quality studio recordings with vintage analog sound.\u003cbr\u003eThis compact package delivers the same audio quality as a locker full of vintage mics and a rack full of outboard gear. The days of spending tens of thousands of dollars on a vintage mic collection are over. Most engineers only ever dream of using such expensive microphones. The Edge Strip makes that dream a reality. Now you can add high-end studio equipment to your collection for a fraction of the price.\u003cbr\u003eThe Edge Strip is designed to model a variety of vintage microphones, preamps, and even signal processors such as EQs and compressors. It contains Antelope Audio’s renowned Edge Modeling Microphone — a dual-capsule condenser large-diaphragm microphone, specifically designed to reproduce the expressiveness and character of expensive classic microphones.\u003cbr\u003eIt also includes the Discrete MP — an all-analog dual-channel microphone pre-amplifier, designed to deliver Antelope’s signature pristine audio quality.\u003cbr\u003eEdge Strip owners also enjoy a package of free native effects plug-ins, including a compressor designed by Antelope Audio’s founder Igor Levin — the Stay Levin.\u003cbr\u003e\u003cbr\u003eDiscrete Analog Design\u003cbr\u003eThe Edge Strip bundle offers natural analog sound, combined with the benefits of precise digital control.\u003cbr\u003eThe Discrete MP includes two XLR+TRS combo inputs, as well as two TRS outputs. The discrete analog circuits in the Discrete MP offer up to 61dB of maximum gain, and total control over the coloration, clarity, and character of the preamps.\u003cbr\u003eMeanwhile, the USB connection offers a simple way to control the Edge Strip remotely, from the comfort of your computer.\u003cbr\u003eEach Edge Modeling Microphone consists of a special double-sided capsule with 3 microns gold sputtered membranes. This allows us to accomplish multi-dimensional modeling and emulate a variety of different microphones, polar patterns and even control the proximity effect.\u003cbr\u003e\u003cbr\u003eExperience EDGE at its maximum\u003cbr\u003eAntelope Audio’s engineering team designed the Discrete MP to perfectly match the character of the Edge Modeling Microphone.\u003cbr\u003eBoth Discrete MP and Edge Modeling Microphone are fully analog, which means they’ll work with any system. Thanks to its dedicated calibration oscillator, Discrete MP is easily adaptable to all studio setups, even those without precise gain linking between two channels. When connecting to a new system, simply engage the built-in oscillator to calibrate the Discrete MP for perfect gain staging.\u003cbr\u003e\u003cbr\u003ePristine sound\u003cbr\u003eunder the hood\u003cbr\u003eUse the Discrete MP to capture the tone of your favorite mic in crystal clear detail. Or, pair the Edge Modeling Microphone with your favorite preamp to create unique sounds.\u003cbr\u003eHowever, using the Discrete MP with the Edge Modeling Microphone unlocks its full potential. Both units utilize discrete analog circuitry and were designed by Igor Levin himself to complement each other perfectly.\u003cbr\u003eBy using the free native plug-ins, you can audition countless combinations of microphones, preamps, and vintage outboard gear to get the perfect tone.\u003cbr\u003e\u003cbr\u003eSpecial AFX\u003cbr\u003eThe Edge Strip bundle includes our custom AFX signal processors, including a growing list of superior microphone emulations, bringing field-proven microphone legends into your setup. The AFX experts, in cooperation with analog engineers and mic designers, developed these microphone emulations.\u003cbr\u003eThe Edge Strip includes 4 vintage mic emulations: Berlin 47 FT, Berlin 87, Berlin 67 and Tokyo 800T, as well as 3 classic German preamp emulations: Antelope V76, Giraffe G9 and BAE 1073 MP. Our famous Stay-Levin compressor, and a vintage BAE 1073 EQ also help you sculpt the perfect tone – all for free! However, if that’s not enough, you can upgrade with dozens of other modeled units featured in our FPGA FX library.\u003cbr\u003eBring your recordings to life using the remarkable sounds of vintage gear. Hear the past and record the future with Antelope’s native DSP effects. Each plug-in uses a high degree of oversampling and precise floating-point calculations to accurately model vintage effects with unparalleled detail. Even when emulating microphones, preamps, and signal processors, you can breathe easy, knowing the Edge Strip offers minimal latency, and Antelope Audio’s signature sound.\u003cbr\u003ePick up an Edge Strip today, and say goodbye to your bulky vintage gear!\u003c\/p\u003e\n\u003cp\u003eAll plug-ins are iLok protected. An iLok is required in order to use them. iLok is not provided by Antelope Audio and must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDiscrete MP specs\u003cbr\u003e\u003cbr\u003eAnalog Inputs\u003cbr\u003e2 x Mic Inputs (combo 3-pin)\u003cbr\u003eMic (XLR only): max 20dBu balanced\u003cbr\u003eMic input impedance : 1.2kOhm\u003cbr\u003eLine (1\/4 \/TRS\/ only): max 29dBu balanced\u003cbr\u003eLine input impedance : 21kOhm\u003cbr\u003e\u003cbr\u003eAnalog Outputs\u003cbr\u003e2 x TRS (22 dBu max)\u003cbr\u003eOutput impedance: 56 ohms\u003cbr\u003e\u003cbr\u003eDigital Connectivity\u003cbr\u003eUSB 2.0 I\/O with Type B connector – only used for remote control\u003cbr\u003e\u003cbr\u003eMic Preamp Gain\u003cbr\u003eRemotely controlled, digitally adjustable Gain, preset Gain – press and turn the button to set the preset gain, or just click it to set the gain to the preset number.\u003cbr\u003e• Gain Range: 0dB to 61dB; 1dB step\u003cbr\u003e• 48V Phantom Power\u003cbr\u003e\u003cbr\u003eCallibration Oscillator\u003cbr\u003eCalibration oscillator of 6dBu @ 1kHz for accurate gain calibration\u003cbr\u003e\u003cbr\u003eTHD + N (Total Harmonic Distortion + Noise):\u003cbr\u003e-106.0 dB @ 10 dBu, 1kHz sine, 50 ohm balanced input\u003cbr\u003e\u003cbr\u003eEIN (Equivalent Input Noise):\u003cbr\u003e-128 dBu (A – weighted)\u003cbr\u003e\u003cbr\u003eFreq Response:\u003cbr\u003e10Hz – 200kHz \/-3dB @ 200kHz\/\u003cbr\u003e\u003cbr\u003eDynamic Range:\u003cbr\u003eDynamic range = -126 dBu\u003cbr\u003e\u003cbr\u003eDimensions (Approx)\u003cbr\u003eWidth: 190 mm\u003cbr\u003eHeight: 46.5 mm\u003cbr\u003eDepth: 157 mm\u003cbr\u003e\u003cbr\u003eOperating Temperature\u003cbr\u003e0-50°C, 32-122°F\u003cbr\u003e\u003cbr\u003eWeight\u003cbr\u003e• Unit weight: 950 grams\u003cbr\u003e• Adaptor weight: 180 grams\u003cbr\u003e• Total weight: 1130 grams\u003cbr\u003e\u003cbr\u003ePower Consumption\u003cbr\u003e5W\u003cbr\u003e\u003cbr\u003eEdge specs\u003cbr\u003e\u003cbr\u003eDiaphragm:\u003cbr\u003eCondenser (Double sided with 10 microns gold sputtered membranes)\u003cbr\u003e\u003cbr\u003eFreq. Response:\u003cbr\u003e20HZ ~ 20KHZ\u003cbr\u003e\u003cbr\u003eTHD+N\u003cbr\u003e-116dB\u003cbr\u003e\u003cbr\u003ePower Requirements:\u003cbr\u003e48V DC Phantom Power\u003cbr\u003e\u003cbr\u003eIn The Box\u003cbr\u003e ✓ DiscreteMP\u003cbr\u003e ✓ Edge microhpone\u003cbr\u003e ✓ Microphone cable \/5pin -\u0026gt; 2 x 3pin\/\u003cbr\u003e ✓ Shock mount\u003cbr\u003e ✓ Pop filter\u003cbr\u003e ✓ Power supply\u003cbr\u003e ✓ USB cable\u003cbr\u003e ✓ Quick Start Guide and Upgrade Guide\u003cbr\u003e ✓ Serial numbers and authorisation codes\u003cbr\u003e\u003cbr\u003eSystem requirements\u003cbr\u003e\u003cbr\u003eComputer\u003cbr\u003e ✓ USB 2.0 equipped Mac or PC\u003cbr\u003e ✓ Core 2 Duo minimum, Core i3\/i5\/i7\/Xeon recommended\u003cbr\u003e ✓ 4 GB RAM minimum, 8 GB RAM recommended\u003cbr\u003e\u003cbr\u003eOperating system\u003cbr\u003e ✓ OS X 10.11 (El Capitan) or greater\u003cbr\u003e ✓ Windows 10\u003c\/p\u003e","published_at":"2018-03-05T12:03:29+02:00","created_at":"2018-03-05T12:23:24+02:00","vendor":"Antelope Audio","type":"Preamps","tags":["Antelope Audio","Preamps","Preamps \u0026 Channel Strips","Price Range_$1000 to $1500","Shop by brand_Antelope Audio","Shop by category_ Preamps","Shop by category_Preamps \u0026 Channel Strips","Shop by category_Studio \u0026 Recording","Studio \u0026 Recording"],"price":122200,"price_min":122200,"price_max":122200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7048768553006,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EdgeStrip","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Antelope Edge Strip","public_title":null,"options":["Default Title"],"price":122200,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/AA_DiscreteMPEdge_2DS-2.jpg?v=1521616453","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Video-logo-black_4_00bdb720-978d-46d8-b74e-a27a350e38e6.png?v=1521616453","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/AA_DiscreteMPEdge_2DSs.jpg?v=1521616453"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/AA_DiscreteMPEdge_2DS-2.jpg?v=1521616453","options":["Title"],"content":"\u003cp\u003eIntroducing the new Edge Strip — an all-in-one solution for high-quality studio recordings with vintage analog sound.\u003cbr\u003eThis compact package delivers the same audio quality as a locker full of vintage mics and a rack full of outboard gear. The days of spending tens of thousands of dollars on a vintage mic collection are over. Most engineers only ever dream of using such expensive microphones. The Edge Strip makes that dream a reality. Now you can add high-end studio equipment to your collection for a fraction of the price.\u003cbr\u003eThe Edge Strip is designed to model a variety of vintage microphones, preamps, and even signal processors such as EQs and compressors. It contains Antelope Audio’s renowned Edge Modeling Microphone — a dual-capsule condenser large-diaphragm microphone, specifically designed to reproduce the expressiveness and character of expensive classic microphones.\u003cbr\u003eIt also includes the Discrete MP — an all-analog dual-channel microphone pre-amplifier, designed to deliver Antelope’s signature pristine audio quality.\u003cbr\u003eEdge Strip owners also enjoy a package of free native effects plug-ins, including a compressor designed by Antelope Audio’s founder Igor Levin — the Stay Levin.\u003cbr\u003e\u003cbr\u003eDiscrete Analog Design\u003cbr\u003eThe Edge Strip bundle offers natural analog sound, combined with the benefits of precise digital control.\u003cbr\u003eThe Discrete MP includes two XLR+TRS combo inputs, as well as two TRS outputs. The discrete analog circuits in the Discrete MP offer up to 61dB of maximum gain, and total control over the coloration, clarity, and character of the preamps.\u003cbr\u003eMeanwhile, the USB connection offers a simple way to control the Edge Strip remotely, from the comfort of your computer.\u003cbr\u003eEach Edge Modeling Microphone consists of a special double-sided capsule with 3 microns gold sputtered membranes. This allows us to accomplish multi-dimensional modeling and emulate a variety of different microphones, polar patterns and even control the proximity effect.\u003cbr\u003e\u003cbr\u003eExperience EDGE at its maximum\u003cbr\u003eAntelope Audio’s engineering team designed the Discrete MP to perfectly match the character of the Edge Modeling Microphone.\u003cbr\u003eBoth Discrete MP and Edge Modeling Microphone are fully analog, which means they’ll work with any system. Thanks to its dedicated calibration oscillator, Discrete MP is easily adaptable to all studio setups, even those without precise gain linking between two channels. When connecting to a new system, simply engage the built-in oscillator to calibrate the Discrete MP for perfect gain staging.\u003cbr\u003e\u003cbr\u003ePristine sound\u003cbr\u003eunder the hood\u003cbr\u003eUse the Discrete MP to capture the tone of your favorite mic in crystal clear detail. Or, pair the Edge Modeling Microphone with your favorite preamp to create unique sounds.\u003cbr\u003eHowever, using the Discrete MP with the Edge Modeling Microphone unlocks its full potential. Both units utilize discrete analog circuitry and were designed by Igor Levin himself to complement each other perfectly.\u003cbr\u003eBy using the free native plug-ins, you can audition countless combinations of microphones, preamps, and vintage outboard gear to get the perfect tone.\u003cbr\u003e\u003cbr\u003eSpecial AFX\u003cbr\u003eThe Edge Strip bundle includes our custom AFX signal processors, including a growing list of superior microphone emulations, bringing field-proven microphone legends into your setup. The AFX experts, in cooperation with analog engineers and mic designers, developed these microphone emulations.\u003cbr\u003eThe Edge Strip includes 4 vintage mic emulations: Berlin 47 FT, Berlin 87, Berlin 67 and Tokyo 800T, as well as 3 classic German preamp emulations: Antelope V76, Giraffe G9 and BAE 1073 MP. Our famous Stay-Levin compressor, and a vintage BAE 1073 EQ also help you sculpt the perfect tone – all for free! However, if that’s not enough, you can upgrade with dozens of other modeled units featured in our FPGA FX library.\u003cbr\u003eBring your recordings to life using the remarkable sounds of vintage gear. Hear the past and record the future with Antelope’s native DSP effects. Each plug-in uses a high degree of oversampling and precise floating-point calculations to accurately model vintage effects with unparalleled detail. Even when emulating microphones, preamps, and signal processors, you can breathe easy, knowing the Edge Strip offers minimal latency, and Antelope Audio’s signature sound.\u003cbr\u003ePick up an Edge Strip today, and say goodbye to your bulky vintage gear!\u003c\/p\u003e\n\u003cp\u003eAll plug-ins are iLok protected. An iLok is required in order to use them. iLok is not provided by Antelope Audio and must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDiscrete MP specs\u003cbr\u003e\u003cbr\u003eAnalog Inputs\u003cbr\u003e2 x Mic Inputs (combo 3-pin)\u003cbr\u003eMic (XLR only): max 20dBu balanced\u003cbr\u003eMic input impedance : 1.2kOhm\u003cbr\u003eLine (1\/4 \/TRS\/ only): max 29dBu balanced\u003cbr\u003eLine input impedance : 21kOhm\u003cbr\u003e\u003cbr\u003eAnalog Outputs\u003cbr\u003e2 x TRS (22 dBu max)\u003cbr\u003eOutput impedance: 56 ohms\u003cbr\u003e\u003cbr\u003eDigital Connectivity\u003cbr\u003eUSB 2.0 I\/O with Type B connector – only used for remote control\u003cbr\u003e\u003cbr\u003eMic Preamp Gain\u003cbr\u003eRemotely controlled, digitally adjustable Gain, preset Gain – press and turn the button to set the preset gain, or just click it to set the gain to the preset number.\u003cbr\u003e• Gain Range: 0dB to 61dB; 1dB step\u003cbr\u003e• 48V Phantom Power\u003cbr\u003e\u003cbr\u003eCallibration Oscillator\u003cbr\u003eCalibration oscillator of 6dBu @ 1kHz for accurate gain calibration\u003cbr\u003e\u003cbr\u003eTHD + N (Total Harmonic Distortion + Noise):\u003cbr\u003e-106.0 dB @ 10 dBu, 1kHz sine, 50 ohm balanced input\u003cbr\u003e\u003cbr\u003eEIN (Equivalent Input Noise):\u003cbr\u003e-128 dBu (A – weighted)\u003cbr\u003e\u003cbr\u003eFreq Response:\u003cbr\u003e10Hz – 200kHz \/-3dB @ 200kHz\/\u003cbr\u003e\u003cbr\u003eDynamic Range:\u003cbr\u003eDynamic range = -126 dBu\u003cbr\u003e\u003cbr\u003eDimensions (Approx)\u003cbr\u003eWidth: 190 mm\u003cbr\u003eHeight: 46.5 mm\u003cbr\u003eDepth: 157 mm\u003cbr\u003e\u003cbr\u003eOperating Temperature\u003cbr\u003e0-50°C, 32-122°F\u003cbr\u003e\u003cbr\u003eWeight\u003cbr\u003e• Unit weight: 950 grams\u003cbr\u003e• Adaptor weight: 180 grams\u003cbr\u003e• Total weight: 1130 grams\u003cbr\u003e\u003cbr\u003ePower Consumption\u003cbr\u003e5W\u003cbr\u003e\u003cbr\u003eEdge specs\u003cbr\u003e\u003cbr\u003eDiaphragm:\u003cbr\u003eCondenser (Double sided with 10 microns gold sputtered membranes)\u003cbr\u003e\u003cbr\u003eFreq. Response:\u003cbr\u003e20HZ ~ 20KHZ\u003cbr\u003e\u003cbr\u003eTHD+N\u003cbr\u003e-116dB\u003cbr\u003e\u003cbr\u003ePower Requirements:\u003cbr\u003e48V DC Phantom Power\u003cbr\u003e\u003cbr\u003eIn The Box\u003cbr\u003e ✓ DiscreteMP\u003cbr\u003e ✓ Edge microhpone\u003cbr\u003e ✓ Microphone cable \/5pin -\u0026gt; 2 x 3pin\/\u003cbr\u003e ✓ Shock mount\u003cbr\u003e ✓ Pop filter\u003cbr\u003e ✓ Power supply\u003cbr\u003e ✓ USB cable\u003cbr\u003e ✓ Quick Start Guide and Upgrade Guide\u003cbr\u003e ✓ Serial numbers and authorisation codes\u003cbr\u003e\u003cbr\u003eSystem requirements\u003cbr\u003e\u003cbr\u003eComputer\u003cbr\u003e ✓ USB 2.0 equipped Mac or PC\u003cbr\u003e ✓ Core 2 Duo minimum, Core i3\/i5\/i7\/Xeon recommended\u003cbr\u003e ✓ 4 GB RAM minimum, 8 GB RAM recommended\u003cbr\u003e\u003cbr\u003eOperating system\u003cbr\u003e ✓ OS X 10.11 (El Capitan) or greater\u003cbr\u003e ✓ Windows 10\u003c\/p\u003e"}
Antelope Edge Strip

Antelope Edge Strip

$1,222.00

Introducing the new Edge Strip — an all-in-one solution for high-quality studio recordings with vintage analog sound.This compact package delivers the same audio quality as a locker full of vintage mics and a rack full of outboard gear. The days of spending tens of thousands of dollars on a vintage mic collection are over. Most engineers only ev...


More Info
{"id":525707083822,"title":"Slate Digital VMS-One Preamp","handle":"slate-digital-vms-one-preamp","description":"\u003cp\u003eVMS-ONE\u003c\/p\u003e\n\u003cp\u003eTo ensure that the ML-1 \u0026amp; ML-2 avoid any color when recorded to the workstation, we created the VMS-ONE preamp. Using state-of-the-art amplifiers, this super linear and clean circuit preamp is the final step in ensuring that the purest signal is created, giving the VMS plugin module the opportunity to add the perfect reproduction of classic microphones and preamps.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included:\u003cbr\u003e- VMS-One Microphone Preamp\u003cbr\u003e- VMS-One Microphone Preamp Power Supply\u003cbr\u003e- Software Redemption Passcode Postcard (FG-73 and FG-76 License)\u003c\/p\u003e","published_at":"2018-03-03T17:09:27+02:00","created_at":"2018-03-03T17:19:35+02:00","vendor":"Slate Digital","type":"Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$200 to $300","Shop by brand_Slate Digital","Shop by category_Preamps \u0026 Channel Strips","Slate Digital","Studio \u0026 Recording"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7036949004334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Slate Digital VMS-One Preamp","public_title":null,"options":["Default Title"],"price":29900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/VMS_One_Preamp.png?v=1520090640","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/VMS_One_Back.png?v=1520090640","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/VMS_PreAmp_PSU.png?v=1520090640"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/VMS_One_Preamp.png?v=1520090640","options":["Title"],"content":"\u003cp\u003eVMS-ONE\u003c\/p\u003e\n\u003cp\u003eTo ensure that the ML-1 \u0026amp; ML-2 avoid any color when recorded to the workstation, we created the VMS-ONE preamp. Using state-of-the-art amplifiers, this super linear and clean circuit preamp is the final step in ensuring that the purest signal is created, giving the VMS plugin module the opportunity to add the perfect reproduction of classic microphones and preamps.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included:\u003cbr\u003e- VMS-One Microphone Preamp\u003cbr\u003e- VMS-One Microphone Preamp Power Supply\u003cbr\u003e- Software Redemption Passcode Postcard (FG-73 and FG-76 License)\u003c\/p\u003e"}
Slate Digital VMS-One Preamp

Slate Digital VMS-One Preamp

$299.00

VMS-ONE To ensure that the ML-1 & ML-2 avoid any color when recorded to the workstation, we created the VMS-ONE preamp. Using state-of-the-art amplifiers, this super linear and clean circuit preamp is the final step in ensuring that the purest signal is created, giving the VMS plugin module the opportunity to add the perfect reproduction of ...


More Info
Universal Audio 2-610S

Mic Preamp

$2,199.00
{"id":525592068142,"title":"Universal Audio 2-610S","handle":"universal-audio-2-610s","description":"2-610 DUAL CHANNEL TUBE PREAMPLIFIER\u003cbr\u003e\u003cbr\u003eDual-channel tube preamp based on the legendary UA 610 modular console.\u003cbr\u003e\u003cbr\u003eDesigned by Bill Putnam Sr., the UA 610 modular console is arguably the “Holy Grail” of vintage tube desks. Leaving its imprint on countless classic recordings from Ray Charles and Frank Sinatra, to iconic titles like Van Halen and the Beach Boys’ Pet Sounds, the 610’s tube-powered mic preamp and EQ gave anything run through it startling three-dimensional warmth, presence, and body.\u003cbr\u003e\u003cbr\u003eThe 2-610 Dual Channel Tube Preamplifier gives you two channels of this legendary piece of music history. Whether you’re running pure analog or enhancing a digital audio workstation, the 2-610 brings classic tube character to any recording project.\u003cbr\u003e\u003cbr\u003eNOW YOU CAN:\u003cbr\u003e ✓ Record with an all-tube, dual-channel preamp derived from the Bill Putnam-designed 610 modular console\u003cbr\u003e ✓ Add tube warmth and saturation with Variable impedance Input, Gain, and Output level controls\u003cbr\u003e ✓ High and Low shelving EQ for ultra-musical tone shaping\u003cbr\u003e ✓ Track through vintage UA, \"handmade in the USA,\" circuits\u003cbr\u003e\u003cbr\u003eModern Features — Vintage Tone\u003cbr\u003e\u003cbr\u003eThe 2-610 Dual Channel Tube Preamplifier builds on the foundation of the classic Putnam console by adding enhanced, user-requested features as well as a more modern workflow. Offering features such as extended top-end response and a -15 dB pad — as well as circuit tweaks for improved stability — the 2-610 preamp is perfect for any source and genre.","published_at":"2018-03-08T16:35:57+02:00","created_at":"2018-03-03T13:30:44+02:00","vendor":"Universal Audio","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Mic Preamp","Studio \u0026 Recording","Universal Audio"],"price":219900,"price_min":219900,"price_max":219900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7035809726510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2610S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio 2-610S","public_title":null,"options":["Default Title"],"price":219900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/2_610_dual_channel_tube_preamp_carousel_1_1.jpg?v=1520076774","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/2_610_dual_channel_tube_preamp_carousel_2_1.jpg?v=1520076783","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/2_610_dual_channel_tube_preamp_carousel_3_1.jpg?v=1520076794"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/2_610_dual_channel_tube_preamp_carousel_1_1.jpg?v=1520076774","options":["Title"],"content":"2-610 DUAL CHANNEL TUBE PREAMPLIFIER\u003cbr\u003e\u003cbr\u003eDual-channel tube preamp based on the legendary UA 610 modular console.\u003cbr\u003e\u003cbr\u003eDesigned by Bill Putnam Sr., the UA 610 modular console is arguably the “Holy Grail” of vintage tube desks. Leaving its imprint on countless classic recordings from Ray Charles and Frank Sinatra, to iconic titles like Van Halen and the Beach Boys’ Pet Sounds, the 610’s tube-powered mic preamp and EQ gave anything run through it startling three-dimensional warmth, presence, and body.\u003cbr\u003e\u003cbr\u003eThe 2-610 Dual Channel Tube Preamplifier gives you two channels of this legendary piece of music history. Whether you’re running pure analog or enhancing a digital audio workstation, the 2-610 brings classic tube character to any recording project.\u003cbr\u003e\u003cbr\u003eNOW YOU CAN:\u003cbr\u003e ✓ Record with an all-tube, dual-channel preamp derived from the Bill Putnam-designed 610 modular console\u003cbr\u003e ✓ Add tube warmth and saturation with Variable impedance Input, Gain, and Output level controls\u003cbr\u003e ✓ High and Low shelving EQ for ultra-musical tone shaping\u003cbr\u003e ✓ Track through vintage UA, \"handmade in the USA,\" circuits\u003cbr\u003e\u003cbr\u003eModern Features — Vintage Tone\u003cbr\u003e\u003cbr\u003eThe 2-610 Dual Channel Tube Preamplifier builds on the foundation of the classic Putnam console by adding enhanced, user-requested features as well as a more modern workflow. Offering features such as extended top-end response and a -15 dB pad — as well as circuit tweaks for improved stability — the 2-610 preamp is perfect for any source and genre."}
Universal Audio 2-610S

Universal Audio 2-610S

$2,199.00

2-610 DUAL CHANNEL TUBE PREAMPLIFIERDual-channel tube preamp based on the legendary UA 610 modular console.Designed by Bill Putnam Sr., the UA 610 modular console is arguably the “Holy Grail” of vintage tube desks. Leaving its imprint on countless classic recordings from Ray Charles and Frank Sinatra, to iconic titles like Van Halen and the Beac...


More Info
{"id":525596983342,"title":"Universal Audio 4-710d Four-Channel Tone-Blending Mic Pre","handle":"universal-audio-4-710d-four-channel-tone-blending-mic-pre","description":"Classic tube and solid-state tones with 1176-style compression and professional A\/D conversion.\u003cbr\u003e\u003cbr\u003eBy merging the best of UA’s classic analog design with smart modern features and workflow enhancements, the 4-710d is the most flexible microphone preamp in the UA lineup.\u003cbr\u003e\u003cbr\u003eFeaturing four high-end mic\/line preamps with a unique tube\/solid-state tone blending circuit, as well as classic 1176-style compression on each mic channel, the 4-710d also offers tons of digital I\/O to expand your setup.\u003cbr\u003e\u003cbr\u003eNOW YOU CAN:\u003cbr\u003e ✓ Track through meticulously designed UA tube preamp circuitry\u003cbr\u003e ✓ Blend tube and solid-state textures for tons of flexibility\u003cbr\u003e ✓ Harness classic 1176-style compression on each mic channel\u003cbr\u003e ✓ Add 8 inputs to any Apollo interface via ADAT optical connection\u003cbr\u003e\u003cbr\u003eBring your Mic Collection to Life with a Wide Range of UA Preamp Tones\u003cbr\u003e\u003cbr\u003eAt the core of the 4-710d are four channels of tone-blending “Twin-Finity” mic preamps. Each channel offers 100% tube and 100% solid-state signal path, as well as the ability to continuously blend between the two circuits. This gives you tons of textures — from creamy to crunchy — and lets you dial in the perfect amount of tube grit or solid-state sheen.\u003cbr\u003e\u003cbr\u003eA Legendary Compression Circuit\u003cbr\u003e\u003cbr\u003eEach of the 4-710d’s four channels features true-bypass 1176-style compression, including specially tuned \"fast\" and \"slow\" settings. This enables quick, on-the-fly tweaking for fattening up a vocal, hold a bass guitar in place, or for adding sizzle and texture to synths and horns.\u003cbr\u003e\u003cbr\u003eAdd Inputs and Professional A\/D Conversion\u003cbr\u003e\u003cbr\u003eWith eight analog inputs, the 4-710d is perfect for expanding your studio. Digitized via ultra high-quality 24-bit A\/D converters at selectable sample rates up to 192 kHz, the 4-710d easily connects to most interfaces with its dual ADAT optical or AES\/EBU DB-25 connectors.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2018-03-08T16:35:57+02:00","created_at":"2018-03-03T13:40:31+02:00","vendor":"Universal Audio","type":"Mic Preamp","tags":["Channel Strips","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Mic Preamp","Shop by category_Mic Preamp with Eq","Studio \u0026 Recording","Universal Audio"],"price":199900,"price_min":199900,"price_max":199900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7035853209646,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"4710D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio 4-710d Four-Channel Tone-Blending Mic Pre","public_title":null,"options":["Default Title"],"price":199900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/4_710d_tone_dyn_carousel_1.jpg?v=1520077339","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Video-logo-black_4_a3532772-c7a7-4671-9f3f-a80d9cf53c43.png?v=1520077339","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/4_710d_tone_dyn_carousel_2.jpg?v=1520077339"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/4_710d_tone_dyn_carousel_1.jpg?v=1520077339","options":["Title"],"content":"Classic tube and solid-state tones with 1176-style compression and professional A\/D conversion.\u003cbr\u003e\u003cbr\u003eBy merging the best of UA’s classic analog design with smart modern features and workflow enhancements, the 4-710d is the most flexible microphone preamp in the UA lineup.\u003cbr\u003e\u003cbr\u003eFeaturing four high-end mic\/line preamps with a unique tube\/solid-state tone blending circuit, as well as classic 1176-style compression on each mic channel, the 4-710d also offers tons of digital I\/O to expand your setup.\u003cbr\u003e\u003cbr\u003eNOW YOU CAN:\u003cbr\u003e ✓ Track through meticulously designed UA tube preamp circuitry\u003cbr\u003e ✓ Blend tube and solid-state textures for tons of flexibility\u003cbr\u003e ✓ Harness classic 1176-style compression on each mic channel\u003cbr\u003e ✓ Add 8 inputs to any Apollo interface via ADAT optical connection\u003cbr\u003e\u003cbr\u003eBring your Mic Collection to Life with a Wide Range of UA Preamp Tones\u003cbr\u003e\u003cbr\u003eAt the core of the 4-710d are four channels of tone-blending “Twin-Finity” mic preamps. Each channel offers 100% tube and 100% solid-state signal path, as well as the ability to continuously blend between the two circuits. This gives you tons of textures — from creamy to crunchy — and lets you dial in the perfect amount of tube grit or solid-state sheen.\u003cbr\u003e\u003cbr\u003eA Legendary Compression Circuit\u003cbr\u003e\u003cbr\u003eEach of the 4-710d’s four channels features true-bypass 1176-style compression, including specially tuned \"fast\" and \"slow\" settings. This enables quick, on-the-fly tweaking for fattening up a vocal, hold a bass guitar in place, or for adding sizzle and texture to synths and horns.\u003cbr\u003e\u003cbr\u003eAdd Inputs and Professional A\/D Conversion\u003cbr\u003e\u003cbr\u003eWith eight analog inputs, the 4-710d is perfect for expanding your studio. Digitized via ultra high-quality 24-bit A\/D converters at selectable sample rates up to 192 kHz, the 4-710d easily connects to most interfaces with its dual ADAT optical or AES\/EBU DB-25 connectors.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
Universal Audio 4-710d Four-Channel Tone-Blending Mic Pre

Universal Audio 4-710d Four-Channel Tone-Blending Mic Pre

$1,999.00

Classic tube and solid-state tones with 1176-style compression and professional A/D conversion.By merging the best of UA’s classic analog design with smart modern features and workflow enhancements, the 4-710d is the most flexible microphone preamp in the UA lineup.Featuring four high-end mic/line preamps with a unique tube/solid-state tone blen...


More Info
{"id":244996931610,"title":"Warm Audio WA273- Two Channel British Microphone Preamp","handle":"warm-audio-two-channel-british-microphone-preamp","description":"\u003cp\u003eA '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamps today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA273 it was imperative to us that the unit pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA273 has been born!\u003cbr\u003e​​\u003cbr\u003eThe \u003cspan\u003eWA273\u003c\/span\u003e is a boutique, 2 channel “Desert Island” preamp, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that works with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA273 equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA273 can’t handle.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA273 with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA273! Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA273 is hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of these classic British circuits not often discussed is the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Channel, Class A, 1073-Style British Microphone Preamp\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic input\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-12-25T02:22:12+02:00","created_at":"2017-12-25T02:49:59+02:00","vendor":"Warm Audio","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$750 to $1000","Shop by brand_Warm Audio","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":99900,"price_min":99900,"price_max":99900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3303894155290,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA273","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA273- Two Channel British Microphone Preamp","public_title":null,"options":["Default Title"],"price":99900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"713541493131"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_ba503e3eecc943a3b44dcf4fb54418cd_mv2.jpg?v=1514163308","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_f32619c00aea4ef1a01b69b007694a00_mv2.jpg?v=1514163308","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_e0beb42361ea4634a532ae26b58e58f6_mv2.jpg?v=1514163308"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_ba503e3eecc943a3b44dcf4fb54418cd_mv2.jpg?v=1514163308","options":["Title"],"content":"\u003cp\u003eA '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamps today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA273 it was imperative to us that the unit pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA273 has been born!\u003cbr\u003e​​\u003cbr\u003eThe \u003cspan\u003eWA273\u003c\/span\u003e is a boutique, 2 channel “Desert Island” preamp, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that works with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA273 equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA273 can’t handle.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA273 with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA273! Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA273 is hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of these classic British circuits not often discussed is the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Channel, Class A, 1073-Style British Microphone Preamp\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic input\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Warm Audio WA273- Two Channel British Microphone Preamp

Warm Audio WA273- Two Channel British Microphone Preamp

$999.00

A '73 For The Rest Of UsIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp...


More Info
{"id":244920221722,"title":"Warm Audio WA73 British Microphone Preamp","handle":"warm-audio-wa73-british-microphone-preamp","description":"A '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamps today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA73 it was imperative to us that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA73 has been born!\u003cbr\u003e\u003cbr\u003eThe WA73 is a “Desert Island” boutique preamp, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73 equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA73 can’t handle.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73 with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73! Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73 is hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Channel, Class A, 1073-style British Microphone Preamp\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eHand wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic input\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eGround lift switch\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-12-25T01:42:18+02:00","created_at":"2017-12-25T01:53:44+02:00","vendor":"Warm Audio","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$500 to $750","Shop by brand_Warm Audio","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":59900,"price_min":59900,"price_max":59900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3303807942682,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA73","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA73 British Microphone Preamp","public_title":null,"options":["Default Title"],"price":59900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"713541493155"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_b33d3e5ce9f74d7db3135e571204cb54_mv2.jpg?v=1514160038","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_e7675f0c04e245bb9a262d9a4eca7fdc_mv2.jpg?v=1514160038","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_8a32ed2d03da4482a9c33917476aca6c_mv2.jpg?v=1514160038","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_6786ab1c6906474ca5545808b87813db_mv2.jpg?v=1514160038"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_b33d3e5ce9f74d7db3135e571204cb54_mv2.jpg?v=1514160038","options":["Title"],"content":"A '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamps today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA73 it was imperative to us that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA73 has been born!\u003cbr\u003e\u003cbr\u003eThe WA73 is a “Desert Island” boutique preamp, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73 equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain and a fully discrete Carnhill Transformer balanced signal path, there’s no recording, mixing or engineering task that the WA73 can’t handle.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73 with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73! Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73 is hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Channel, Class A, 1073-style British Microphone Preamp\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eHand wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic input\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eGround lift switch\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e"}
Warm Audio WA73 British Microphone Preamp

Warm Audio WA73 British Microphone Preamp

$599.00

A '73 For The Rest Of UsIf there’s one preamp that professional engineers would unanimously agree has defined the tone of pop/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp...


More Info
{"id":244854980634,"title":"Warm Audio WA273-EQ Two Channel British Microphone Preamp \u0026 EQ","handle":"warm-audio-eq-two-channel-british-microphone-preamp-eq","description":"\u003cp\u003eA 2 channel '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp-eq’s today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA273-EQ it was imperative that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA273-EQ has been born!\u003cbr\u003e​\u003cbr\u003eThe WA273-EQ is a “Desert Island” 2 channel boutique preamp-eq, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked well with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA273-EQ equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain, a fully discrete Carnhill Transformer balanced signal path, and versatile 3 band inductor EQ, there’s no recording, mixing or engineering task the WA273-EQ can’t handle.\u003c\/p\u003e\n\u003cp\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA273-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA273-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA273-EQ with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of these classic British circuits not often discussed is the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e​\u003cbr\u003eUK Blore Edwards Switch-Pots\u003cbr\u003eA great sounding 1073-style circuit should be just as reliable as it is great sounding. The complex dual concentric switch potentiometers in the EQ sections of the WA273-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers. The use of Blore-Edwards components is no small inclusion for a 1073-style preamp-eq in this price range.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Channel, Class A, 1073-style British Microphone Preamp with EQ\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eUK made - Blore Edwards EQ dual-concentric switch potentiometers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003eInductor based 3 band EQ\u003c\/li\u003e\n\u003cli\u003eLow Band Boost\/Cut - 35, 60, 110, 220 Hz\u003c\/li\u003e\n\u003cli\u003eMid Band Boost\/Cut - 360, 700, 1600, 3200, 4800, 7200 Hz\u003c\/li\u003e\n\u003cli\u003eHigh Band Boost\/Cut - 10, 12, 16 kHz\u003c\/li\u003e\n\u003cli\u003eAdditional high band frequency EQ points added (compared to vintage 1073)\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic inputs (front \u0026amp; back)\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003cli\u003e​\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-12-25T01:10:21+02:00","created_at":"2017-12-25T01:27:39+02:00","vendor":"Warm Audio","type":"Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$1000 to $1500","Shop by brand_Warm Audio","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":149900,"price_min":149900,"price_max":149900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3303731658778,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA273-EQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA273-EQ Two Channel British Microphone Preamp \u0026 EQ","public_title":null,"options":["Default Title"],"price":149900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"713541493148"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_9b8c5eb97b564fd9b6da01f99d7560fe_mv2.jpg?v=1514158270","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_684005ebfa87402a8a27278c5b4ced81_mv2.jpg?v=1514158270","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_1323600c033145768baa3039b5d5f928_mv2.jpg?v=1514158270","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_ca17482a22134651b417d16a3885bec1_mv2.jpg?v=1514158270"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_9b8c5eb97b564fd9b6da01f99d7560fe_mv2.jpg?v=1514158270","options":["Title"],"content":"\u003cp\u003eA 2 channel '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp-eq’s today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA273-EQ it was imperative that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA273-EQ has been born!\u003cbr\u003e​\u003cbr\u003eThe WA273-EQ is a “Desert Island” 2 channel boutique preamp-eq, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked well with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA273-EQ equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain, a fully discrete Carnhill Transformer balanced signal path, and versatile 3 band inductor EQ, there’s no recording, mixing or engineering task the WA273-EQ can’t handle.\u003c\/p\u003e\n\u003cp\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA273-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA273-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA273-EQ with these beautiful custom Transformers.\u003cbr\u003e\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of these classic British circuits not often discussed is the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e​\u003cbr\u003eUK Blore Edwards Switch-Pots\u003cbr\u003eA great sounding 1073-style circuit should be just as reliable as it is great sounding. The complex dual concentric switch potentiometers in the EQ sections of the WA273-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers. The use of Blore-Edwards components is no small inclusion for a 1073-style preamp-eq in this price range.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Channel, Class A, 1073-style British Microphone Preamp with EQ\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eUK made - Blore Edwards EQ dual-concentric switch potentiometers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete\u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003eInductor based 3 band EQ\u003c\/li\u003e\n\u003cli\u003eLow Band Boost\/Cut - 35, 60, 110, 220 Hz\u003c\/li\u003e\n\u003cli\u003eMid Band Boost\/Cut - 360, 700, 1600, 3200, 4800, 7200 Hz\u003c\/li\u003e\n\u003cli\u003eHigh Band Boost\/Cut - 10, 12, 16 kHz\u003c\/li\u003e\n\u003cli\u003eAdditional high band frequency EQ points added (compared to vintage 1073)\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic inputs (front \u0026amp; back)\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003cli\u003e​\u003c\/li\u003e\n\u003c\/ul\u003e"}
Warm Audio WA273-EQ Two Channel British Microphone Preamp & EQ

Warm Audio WA273-EQ Two Channel British Microphone Preamp & EQ

$1,499.00

A 2 channel '73 For The Rest Of UsIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Gra...


More Info
{"id":244777123866,"title":"Warm Audio WA73-EQ British Microphone Preamp \u0026 EQ","handle":"warm-audio-wa73-eq-british-microphone-preamp-eq","description":"A '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp-eq’s today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA73-EQ it was imperative that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA73-EQ has been born!\u003cbr\u003e​\u003cbr\u003eThe WA73-EQ is a “Desert Island” boutique preamp-eq, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked well with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73-EQ equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain, a fully discrete Carnhill Transformer balanced signal path, and versatile 3 band inductor EQ, there’s no recording, mixing or engineering task the WA73-EQ can’t handle.\u003cbr\u003eSpecifications\u003cbr\u003eVideo Gallery\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73-EQ with these beautiful custom Transformers.\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e​\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73-EQ with these beautiful custom Transformers.\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e​\u003cbr\u003eLISTENING ROOM\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e​\u003cbr\u003eUK Blore Edwards Switch-Pots\u003cbr\u003eA great sounding 1073-style circuit should be just as reliable as it is great sounding. The complex dual concentric switch potentiometers in the EQ section of the WA73-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers. The use of Blore-Edwards components is no small inclusion for a 1073-style preamp-eq in this price range.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Channel, Class A, 1073-style British Microphone Preamp with EQ\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eUK made - Blore Edwards EQ dual-concentric switch potentiometers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete \u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003eInductor based 3 band EQ\u003c\/li\u003e\n\u003cli\u003eLow Band Boost\/Cut - 35, 60, 110, 220 Hz\u003c\/li\u003e\n\u003cli\u003eMid Band Boost\/Cut - 360, 700, 1600, 3200, 4800, 7200 Hz\u003c\/li\u003e\n\u003cli\u003eHigh Band Boost\/Cut - 10, 12, 16 kHz\u003c\/li\u003e\n\u003cli\u003eAdditional high band frequency EQ points added (compared to vintage 1073)\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic inputs (front \u0026amp; back)\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-12-25T00:06:26+02:00","created_at":"2017-12-25T00:32:05+02:00","vendor":"Warm Audio","type":"Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$750 to $1000","Shop by brand_Warm Audio","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3303636598810,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA73-EQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA73-EQ British Microphone Preamp \u0026 EQ","public_title":null,"options":["Default Title"],"price":79900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"713541493162"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_70dc7f730ba246339a6b83a19ba47639_mv2.jpg?v=1514155238","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_f561b77aed0e4b79a555a4c611a41bfe_mv2.jpg?v=1514155238","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_3bd6f87e657e4af09fc65b349a2b52a6_mv2.jpg?v=1514155238","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_9ee3a6ee05cb4ebd917f00c95428824f_mv2.jpg?v=1514155238"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_70dc7f730ba246339a6b83a19ba47639_mv2.jpg?v=1514155238","options":["Title"],"content":"A '73 For The Rest Of Us\u003cbr\u003eIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop\/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of preamp-eq’s today. The Warm Audio “WA73 Family” provides single and dual channel re-creations of this classic British preamp (with \u0026amp; w\/out EQ), that each pay careful and humble homage to the original circuit.\u003cbr\u003e​\u003cbr\u003eWhen we at Warm Audio decided to release the WA73-EQ it was imperative that the products pay respectful homage to the sacred British console history in both design and performance. The tone and sweet character that the vintage units impart is so unique and familiar, that we had only the pure desire to release truly sonic accurate replicas. After years of R\u0026amp;D, careful reverse-engineering, and countless hours of auditioning, the WA73-EQ has been born!\u003cbr\u003e​\u003cbr\u003eThe WA73-EQ is a “Desert Island” boutique preamp-eq, but it can also be classified as a studio and live work-horse. The classic 1073 was known for being a versatile tool that worked well with all kinds of microphones from Condenser, to Dynamic, to Ribbon. The WA73-EQ equally shines on all types of microphones and sources including; vocals, acoustic\/electric guitars, bass, drums, percussion, orchestras, keyboards, and even as a tone shaping tool to run partial or complete mixes through. With 80dB of gain, a fully discrete Carnhill Transformer balanced signal path, and versatile 3 band inductor EQ, there’s no recording, mixing or engineering task the WA73-EQ can’t handle.\u003cbr\u003eSpecifications\u003cbr\u003eVideo Gallery\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73-EQ with these beautiful custom Transformers.\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e​\u003cbr\u003eUK Custom Carnhill Transformers\u003cbr\u003e1073 enthusiasts unequivocally get excited about the component history in these classic circuits. The signal transformers are a common topic of conversation. The classic vintage units used various versions of transformers throughout the years, and the most coveted were the very first versions made by Marinair Radar. Marinair Radar Transformers are regarded as the most desirable 1073 choice due to their fluid and forgiving nature. They saturate sweetly when pushed, and have been known to make engineers cry when they hear how beautiful their mixes sound through them! Warm Audio worked closely with Carnhill Transformers of Cambridgeshire, UK, to design faithful replicas of these most coveted, early version transformers. We at Warm Audio have not yet heard a modern day 1073-style preamp sound as close to the early vintage 1073 design as does our WA73-EQ with these beautiful custom Transformers.\u003cbr\u003eHand Wired \u0026amp; Hand Assembled\u003cbr\u003eThe classic 1073 was hand-wired and so is the WA73-EQ. Guru’s claim that a portion of the 1073’s classic tone can be attributed to the hand-wired nature of the build. The WA73-EQ is authentically hand-wired and hand assembled, including the pcb components that are all populated by hand.\u003cbr\u003e​\u003cbr\u003eLISTENING ROOM\u003cbr\u003eCapacitors \u0026amp; Signal Path\u003cbr\u003eAn important part of the classic British circuits not often discussed are the different styles of capacitors and output transistor used. We found it important to maintain integrity to the original design by using tantalum and polystyrene capacitors in the signal path and an output transistor choice that is much smoother in the high gain settings than what is typically found in modern 1073-style replicas.\u003cbr\u003e​\u003cbr\u003eUK Blore Edwards Switch-Pots\u003cbr\u003eA great sounding 1073-style circuit should be just as reliable as it is great sounding. The complex dual concentric switch potentiometers in the EQ section of the WA73-EQ are made in the UK by Blore Edwards who manufacture military spec switches and potentiometers. The use of Blore-Edwards components is no small inclusion for a 1073-style preamp-eq in this price range.\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Channel, Class A, 1073-style British Microphone Preamp with EQ\u003c\/li\u003e\n\u003cli\u003eUK made Carnhill Transformers\u003c\/li\u003e\n\u003cli\u003eUK made - Blore Edwards EQ dual-concentric switch potentiometers\u003c\/li\u003e\n\u003cli\u003eHand Wired, hand assembled\u003c\/li\u003e\n\u003cli\u003e80dB of gain - resistor stepped gain switch\u003c\/li\u003e\n\u003cli\u003eFully discrete \u003c\/li\u003e\n\u003cli\u003eTONE button - Changes input transformer impedance for varying tone\u003c\/li\u003e\n\u003cli\u003ePolarity switch\u003c\/li\u003e\n\u003cli\u003e48v phantom power\u003c\/li\u003e\n\u003cli\u003eInductor based 3 band EQ\u003c\/li\u003e\n\u003cli\u003eLow Band Boost\/Cut - 35, 60, 110, 220 Hz\u003c\/li\u003e\n\u003cli\u003eMid Band Boost\/Cut - 360, 700, 1600, 3200, 4800, 7200 Hz\u003c\/li\u003e\n\u003cli\u003eHigh Band Boost\/Cut - 10, 12, 16 kHz\u003c\/li\u003e\n\u003cli\u003eAdditional high band frequency EQ points added (compared to vintage 1073)\u003c\/li\u003e\n\u003cli\u003e4 position inductor based hipass filter - 50, 80, 160, 300 Hz\u003c\/li\u003e\n\u003cli\u003eXLR mic inputs (front \u0026amp; back)\u003c\/li\u003e\n\u003cli\u003eLine level TRS input\u003c\/li\u003e\n\u003cli\u003eTS Send\/Receive insert jacks\u003c\/li\u003e\n\u003cli\u003eXLR \u0026amp; TRS line level outputs\u003c\/li\u003e\n\u003cli\u003eDirect In, instrument input\u003c\/li\u003e\n\u003cli\u003eOutput control\u003c\/li\u003e\n\u003cli\u003eLed level indication\u003c\/li\u003e\n\u003cli\u003eFreq response 20Hz - 20kHz +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003e19\" rackable\u003c\/li\u003e\n\u003cli\u003eInternal IEC 115v\/230v power inlet\u003c\/li\u003e\n\u003c\/ul\u003e"}
Warm Audio WA73-EQ British Microphone Preamp & EQ

Warm Audio WA73-EQ British Microphone Preamp & EQ

$799.00

A '73 For The Rest Of UsIf there’s one preamp-eq that professional engineers would unanimously agree has defined the tone of pop/rock records for the last 50+ years, it would most definitely be the venerable 1073. The 1073 has been massively used in recording and live applications for decades and is still considered to be the “Holy Grail” of pre...


More Info
Shadow Hills Industries Quad Gama w/Iron Mod

Microphone Preamps

$4,435.00
{"id":244305985562,"title":"Shadow Hills Industries Quad Gama w\/Iron Mod","handle":"shadow-hills-industries-quad-gama-w-iron-mod","description":"\u003cstrong\u003eShadow Hills Industries Quad Gama w\/Iron Mod\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eThe Shadow Hills Quad GAMA is a four channel version of the Gama, with all the capabilities, features, and quality of the original.\u003c\/p\u003e\n\u003cp\u003eThe Gama Is centered around our custom discrete op-amp. This no-compromise design exudes hugeness, fidelity, punchy-ness and depth, across the full frequency range, without becoming veiled or choked, the way non-discrete varieties can.\u003c\/p\u003e\n\u003cp\u003eThe preamplifier input is transformer balanced and utilizes an original Jensen input transformer. We couldn't decide which vintage output transformer we liked best, so we had our favorites perfectly recreated, and included them all. You can change output transformers with the flick of a switch, thus changing the tonal capabilities to compliment to whatever material you are recording. This allows you to audition different settings to find the perfect match for microphone or direct input without patching and un-patching other preamps, and possibly alleviating the need for EQ. Choose between Nickel, Discrete, or Steel settings, or upgrade the Discrete to Iron. Each transformer position is stellar unto itself, but the capability of switching between them is like having three great pre's in one.\u003c\/p\u003e\n\u003cp\u003eThe microphone gain is controlled by discrete attenuators made from custom twenty-four position Elma switches. This means that all of the channels are perfectly matched to each other and will never wear out like a pot can. Unlike other boutique companies that offer expensive stepped, or mastering options, but limit you to twelve positions, or use stepped pots that can fail over time, ours have twice the resolution and are included in the price.\u003c\/p\u003e\n\u003cp\u003eAll the standard Mic-pre features are present: phantom power, phase reverse, a twenty dB pad, and direct input. We have also included the ability to pad and reverse the phase of the Direct Input. The separate power supply is very robust and can power two units.\u003c\/p\u003e\n\u003cp\u003eQuality is also unmatched. Twelve gauge steel chassis, engraved front panels, large custom knobs, and personalized engraved serial number plates, set the build apart. The design aesthetic is reminiscent of 1930's futuristic military technology, that has only now been realized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuperb sound quality and character\u003c\/li\u003e\n\u003cli\u003eSwitchable output transformers\u003c\/li\u003e\n\u003cli\u003eDetented switches\u003c\/li\u003e\n\u003cli\u003ePhase reversible and padable DI\u003c\/li\u003e\n\u003cli\u003eEngraved front panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-12-24T13:43:18+02:00","created_at":"2017-12-24T13:44:13+02:00","vendor":"Shadow Hills Industries","type":"Microphone Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$3000 and Over","Shadow Hills Industries","Shop by brand_Shadow Hills Industries","Shop by category_Preamps","Studio \u0026 Recording"],"price":443500,"price_min":443500,"price_max":443500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":3302760415258,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Shadow Hills Industries Quad Gama w\/Iron Mod","public_title":null,"options":["Default Title"],"price":443500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/shadowhills_quadgama.jpg?v=1514115861"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/shadowhills_quadgama.jpg?v=1514115861","options":["Title"],"content":"\u003cstrong\u003eShadow Hills Industries Quad Gama w\/Iron Mod\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003eThe Shadow Hills Quad GAMA is a four channel version of the Gama, with all the capabilities, features, and quality of the original.\u003c\/p\u003e\n\u003cp\u003eThe Gama Is centered around our custom discrete op-amp. This no-compromise design exudes hugeness, fidelity, punchy-ness and depth, across the full frequency range, without becoming veiled or choked, the way non-discrete varieties can.\u003c\/p\u003e\n\u003cp\u003eThe preamplifier input is transformer balanced and utilizes an original Jensen input transformer. We couldn't decide which vintage output transformer we liked best, so we had our favorites perfectly recreated, and included them all. You can change output transformers with the flick of a switch, thus changing the tonal capabilities to compliment to whatever material you are recording. This allows you to audition different settings to find the perfect match for microphone or direct input without patching and un-patching other preamps, and possibly alleviating the need for EQ. Choose between Nickel, Discrete, or Steel settings, or upgrade the Discrete to Iron. Each transformer position is stellar unto itself, but the capability of switching between them is like having three great pre's in one.\u003c\/p\u003e\n\u003cp\u003eThe microphone gain is controlled by discrete attenuators made from custom twenty-four position Elma switches. This means that all of the channels are perfectly matched to each other and will never wear out like a pot can. Unlike other boutique companies that offer expensive stepped, or mastering options, but limit you to twelve positions, or use stepped pots that can fail over time, ours have twice the resolution and are included in the price.\u003c\/p\u003e\n\u003cp\u003eAll the standard Mic-pre features are present: phantom power, phase reverse, a twenty dB pad, and direct input. We have also included the ability to pad and reverse the phase of the Direct Input. The separate power supply is very robust and can power two units.\u003c\/p\u003e\n\u003cp\u003eQuality is also unmatched. Twelve gauge steel chassis, engraved front panels, large custom knobs, and personalized engraved serial number plates, set the build apart. The design aesthetic is reminiscent of 1930's futuristic military technology, that has only now been realized.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuperb sound quality and character\u003c\/li\u003e\n\u003cli\u003eSwitchable output transformers\u003c\/li\u003e\n\u003cli\u003eDetented switches\u003c\/li\u003e\n\u003cli\u003ePhase reversible and padable DI\u003c\/li\u003e\n\u003cli\u003eEngraved front panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Shadow Hills Industries Quad Gama w/Iron Mod

Shadow Hills Industries Quad Gama w/Iron Mod

$4,435.00

Shadow Hills Industries Quad Gama w/Iron Mod The Shadow Hills Quad GAMA is a four channel version of the Gama, with all the capabilities, features, and quality of the original. The Gama Is centered around our custom discrete op-amp. This no-compromise design exudes hugeness, fidelity, punchy-ness and depth, across the full frequency range, wit...


More Info
Solid State Logic X-Rack fitted with 6 blank panels

Signal Processing Accessories

$1,398.60
{"id":98637086746,"title":"Solid State Logic X-Rack fitted with 6 blank panels","handle":"solid-state-logic-x-rack-fitted-with-6-blank-panels","description":"\u003cp\u003eModular SuperAnalogue™ console grade technology for your rack. Empty 8 slot modular 19\" rack chassis with internal high capacity power supply and built in SSL TotalRecall™ system. For our own X-Rack format modules.\u003c\/p\u003e\n\u003cp\u003eComes with 6 blank panels\u003c\/p\u003e","published_at":"2017-09-13T16:19:06+02:00","created_at":"2017-09-13T16:26:18+02:00","vendor":"Solid State Logic","type":"Signal Processing Accessories","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$1000 to $1500","Shop by brand_Solid State Logic","Shop by category_Channel Strips","Shop by category_Preamps","Solid State Logic","Studio \u0026 Recording"],"price":139860,"price_min":139860,"price_max":139860,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1228636749850,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid State Logic X-Rack fitted with 6 blank panels","public_title":null,"options":["Default Title"],"price":139860,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"729935X3"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SSL-X-Rack_Empty_0_a3ecaa57-1d3d-405a-a125-997649301175.png?v=1505312945"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SSL-X-Rack_Empty_0_a3ecaa57-1d3d-405a-a125-997649301175.png?v=1505312945","options":["Title"],"content":"\u003cp\u003eModular SuperAnalogue™ console grade technology for your rack. Empty 8 slot modular 19\" rack chassis with internal high capacity power supply and built in SSL TotalRecall™ system. For our own X-Rack format modules.\u003c\/p\u003e\n\u003cp\u003eComes with 6 blank panels\u003c\/p\u003e"}
Solid State Logic X-Rack fitted with 6 blank panels

Solid State Logic X-Rack fitted with 6 blank panels

$1,398.60

Modular SuperAnalogue™ console grade technology for your rack. Empty 8 slot modular 19" rack chassis with internal high capacity power supply and built in SSL TotalRecall™ system. For our own X-Rack format modules. Comes with 6 blank panels


More Info
Aurora Audio GTQC

Outboard

$2,895.00
{"id":10382928717,"title":"Aurora Audio GTQC","handle":"aurora-audio-gtqc","description":"\u003ch1 id=\"reader-title\"\u003eGTQC | Aurora Audio\u003c\/h1\u003e\n\u003cp\u003eWith introduction of the GTC2, it seemed only natural to combine it with the GTQ2 and create a channel strip. That is exactly what Geoff Tanner decided to do. The GTQC was born.\u003c\/p\u003e\n\u003cp\u003eThe GTQC is quite literally one channel of the GTQ2 Preamp and one channel of the GTC2 Compressor. It all conveniently fits into a one rack space package that gives you Class A discrete amplification, 3 band eq, DI, and compression (opto circuit, FET circuit, and COMB mode are all featured).\u003c\/p\u003e\n\u003cp\u003eAll of the features of the GTQ2 and GTQC are here in the GTQC as well. One feature unique to the GTQC is the ability to independently use the preamp or the compressor. Balanced XLR in and out allows the user to patch in the pre or compressor on different sources if needed. To use the GTQC as an “all in one” channel strip, all you need to do is press one button. This enables the signal to go in through the preamp and come out the compressor. This makes the compressor output gain your final control for volume and lets you use the VU meter (in output mode) to make sure you have optimum levels.\u003c\/p\u003e\n\u003cp\u003eIf you have a pair of GTQC channel strips at your disposal, the user has access to some pretty serious power in stereo. Ideal for any stereo recording and compression, you can link the compressors with ease. All you need is a single TRS cable. Just like the GTC2, the stereo link follows which ever unit is compressing more. If you are looking to beef up your entire mix by having a stereo channel strip on the insert, look no further!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreamp Input impedance = 1,200 ohms or 300 ohms (switch selectable on rear panel) transformer balanced and floating\u003c\/li\u003e\n\u003cli\u003eCompressor Input impedance = 10k ohms transformer balanced and floating\u003c\/li\u003e\n\u003cli\u003eBoth devices have transformer balanced and floating outputs that will drive any impedance from 600 ohms upwards\u003c\/li\u003e\n\u003cli\u003eD.I. Input impedance = 10Megohms\u003c\/li\u003e\n\u003cli\u003eFrequency response \u0026lt;20Hz to\u0026gt;50KHz + 1dB\u003c\/li\u003e\n\u003cli\u003eDistortion \u0026lt;0.075% @ 1KHz\u003c\/li\u003e\n\u003cli\u003ePreamp EIN \u0026lt;-125dB @ 80dB gain\u003c\/li\u003e\n\u003cli\u003eCompressor Noise \u0026lt;-75dB (20 to 22KHz)\u003c\/li\u003e\n\u003cli\u003eDimensions 19″ x 1U x 11″ (482.6mm x 44.45mm x 279.4mm)\u003c\/li\u003e\n\u003cli\u003eWeight = 20lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTQC Preamp\/EQ Section:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe same transformer balanced Class A mic preamp\/ EQ from the GTQ2\u003c\/li\u003e\n\u003cli\u003eDirect input with 10dB gain and 10Mohm input impedance\u003c\/li\u003e\n\u003cli\u003eThree band EQ provides + 15dB adjustment at 80Hz (Bass), 12KHz (Treble) and mid frequencies of 400Hz, 1,600Hz and 3,200Hz\u003c\/li\u003e\n\u003cli\u003e80Hz 18dB\/octave High Pass Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTQC Compressor Section:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThreshold = -10dBu to +30dBu\u003c\/li\u003e\n\u003cli\u003eRatio = 1.5:1 to 10:1\u003c\/li\u003e\n\u003cli\u003eAttack Time = 500uS to 5mS\u003c\/li\u003e\n\u003cli\u003eRelease Time = 100mS to 3 Seconds\u003c\/li\u003e\n\u003cli\u003eGain Make up = 0dB to +20dB\u003c\/li\u003e\n\u003cli\u003eBoth Fet and Opto compression\u003c\/li\u003e\n\u003cli\u003eAuto Release\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-07-02T17:25:57+02:00","created_at":"2017-07-02T17:31:04+02:00","vendor":"Aurora Audio","type":"Outboard","tags":["Analog Hardware","Aurora Audio","Aurora Audio GTQC Mk10","Channel Strips","Mono","Price Range_$2000 to $3000","Shop by brand_Aurora Audio","Shop by category_Channel Strips"],"price":289500,"price_min":289500,"price_max":289500,"available":true,"price_varies":false,"compare_at_price":289500,"compare_at_price_min":289500,"compare_at_price_max":289500,"compare_at_price_varies":false,"variants":[{"id":40107129357,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GTQC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Aurora Audio GTQC","public_title":null,"options":["Default Title"],"price":289500,"weight":0,"compare_at_price":289500,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/featured_gtqc.png?v=1504965964","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/gtqc_front.jpg?v=1504965964","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/gtqc_back.jpg?v=1504965964"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/featured_gtqc.png?v=1504965964","options":["Title"],"content":"\u003ch1 id=\"reader-title\"\u003eGTQC | Aurora Audio\u003c\/h1\u003e\n\u003cp\u003eWith introduction of the GTC2, it seemed only natural to combine it with the GTQ2 and create a channel strip. That is exactly what Geoff Tanner decided to do. The GTQC was born.\u003c\/p\u003e\n\u003cp\u003eThe GTQC is quite literally one channel of the GTQ2 Preamp and one channel of the GTC2 Compressor. It all conveniently fits into a one rack space package that gives you Class A discrete amplification, 3 band eq, DI, and compression (opto circuit, FET circuit, and COMB mode are all featured).\u003c\/p\u003e\n\u003cp\u003eAll of the features of the GTQ2 and GTQC are here in the GTQC as well. One feature unique to the GTQC is the ability to independently use the preamp or the compressor. Balanced XLR in and out allows the user to patch in the pre or compressor on different sources if needed. To use the GTQC as an “all in one” channel strip, all you need to do is press one button. This enables the signal to go in through the preamp and come out the compressor. This makes the compressor output gain your final control for volume and lets you use the VU meter (in output mode) to make sure you have optimum levels.\u003c\/p\u003e\n\u003cp\u003eIf you have a pair of GTQC channel strips at your disposal, the user has access to some pretty serious power in stereo. Ideal for any stereo recording and compression, you can link the compressors with ease. All you need is a single TRS cable. Just like the GTC2, the stereo link follows which ever unit is compressing more. If you are looking to beef up your entire mix by having a stereo channel strip on the insert, look no further!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreamp Input impedance = 1,200 ohms or 300 ohms (switch selectable on rear panel) transformer balanced and floating\u003c\/li\u003e\n\u003cli\u003eCompressor Input impedance = 10k ohms transformer balanced and floating\u003c\/li\u003e\n\u003cli\u003eBoth devices have transformer balanced and floating outputs that will drive any impedance from 600 ohms upwards\u003c\/li\u003e\n\u003cli\u003eD.I. Input impedance = 10Megohms\u003c\/li\u003e\n\u003cli\u003eFrequency response \u0026lt;20Hz to\u0026gt;50KHz + 1dB\u003c\/li\u003e\n\u003cli\u003eDistortion \u0026lt;0.075% @ 1KHz\u003c\/li\u003e\n\u003cli\u003ePreamp EIN \u0026lt;-125dB @ 80dB gain\u003c\/li\u003e\n\u003cli\u003eCompressor Noise \u0026lt;-75dB (20 to 22KHz)\u003c\/li\u003e\n\u003cli\u003eDimensions 19″ x 1U x 11″ (482.6mm x 44.45mm x 279.4mm)\u003c\/li\u003e\n\u003cli\u003eWeight = 20lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTQC Preamp\/EQ Section:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe same transformer balanced Class A mic preamp\/ EQ from the GTQ2\u003c\/li\u003e\n\u003cli\u003eDirect input with 10dB gain and 10Mohm input impedance\u003c\/li\u003e\n\u003cli\u003eThree band EQ provides + 15dB adjustment at 80Hz (Bass), 12KHz (Treble) and mid frequencies of 400Hz, 1,600Hz and 3,200Hz\u003c\/li\u003e\n\u003cli\u003e80Hz 18dB\/octave High Pass Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGTQC Compressor Section:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThreshold = -10dBu to +30dBu\u003c\/li\u003e\n\u003cli\u003eRatio = 1.5:1 to 10:1\u003c\/li\u003e\n\u003cli\u003eAttack Time = 500uS to 5mS\u003c\/li\u003e\n\u003cli\u003eRelease Time = 100mS to 3 Seconds\u003c\/li\u003e\n\u003cli\u003eGain Make up = 0dB to +20dB\u003c\/li\u003e\n\u003cli\u003eBoth Fet and Opto compression\u003c\/li\u003e\n\u003cli\u003eAuto Release\u003c\/li\u003e\n\u003c\/ul\u003e"}
Aurora Audio GTQC

Aurora Audio GTQC

$2,895.00

GTQC | Aurora Audio With introduction of the GTC2, it seemed only natural to combine it with the GTQ2 and create a channel strip. That is exactly what Geoff Tanner decided to do. The GTQC was born. The GTQC is quite literally one channel of the GTQ2 Preamp and one channel of the GTC2 Compressor. It all conveniently fits into a one rack space pac...


More Info
Sale
Warm Audio WA12 MKII
Warm Audio WA12 MKII

Mic Preamp/Dl

$469.00 $598.80
{"id":9447694669,"title":"Warm Audio WA12 MKII","handle":"warm-audio-wa12-mkii","description":"\u003cp\u003e\u003cstrong\u003eWarm Audio WA12 MKII\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaising The Volume.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA lot of preamps on the market do a good job of raising the volume of mics and instruments. Unfortunately, many pres are doing only that, raising volume.  The “Super clean” designs of today often leave the signal exiting the preamp sounding much the same as it did entering it.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a preamp to improve and shape your signal you will most definitely love the WA12 MKII. The WA12 MKII is designed to transform plain instruments and vocals into exciting tone.  If your mixes lack depth, struggle to sound alive, or are just missing that professional touch you’ve always wanted, there is a good chance you will love the WA12 MKII.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacked With Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA12 MKII is a completely discrete, high voltage, dual-transformer microphone preamplifier designed for high gain (+71dB), high headroom, low noise, and an exciting sonic performance – great for all types of recording applications.  A high quality mic preamp is one of the most critical pieces needed to achieve the elusive ‘larger than life’ sound, and the WA12 MKII is more than capable of delivering. \u003cbr\u003e​\u003cbr\u003eThe WA12 MKII is based around a discrete op-amp, the X731, which is our own reproduction of the vintage classic Melcor 1731, considered by some to be the warmer predecessor to the modern 2520-style op-amp.  The X731 can achieve vibrant, clean and lifelike tones; but can also be driven into mild saturation at much higher gain levels.  The effects can be subtle, but very pleasing to the ear.  The WA12 MKII can also accept any discrete op-amp on the market which conforms to the +\/-16v, 2520 pinout standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e    •    Utilizes premium grade input and output USA CineMag transformers.\u003cbr\u003e    •    71db of Gain, fully discrete signal path.\u003cbr\u003e    •    Utilizes a discrete 6-pin socketed 1731 style opamp.  Can be replaced with other 6-pin \"2520 foot-print\" opamps for varying tone\/flavor.\u003cbr\u003e    •    TONE button – Switches the input impedance from 600 ohms to 150 ohms.  Changes the tone of both the mic and HI-Z inputs.\u003cbr\u003e    •    2 Meg Ohm True HI-Z input on front panel. Sends instrument signal through entire circuit including both Cinemag Transformers and the discrete opamp. Great for guitars, bass, keyboards and other instruments that have a 1\/4″ output jack.\u003cbr\u003e    •    Mic level balanced input: XLR.\u003cbr\u003e    •    Balanced outputs: XLR and 1\/4″\/TRS.\u003cbr\u003e    •    48 volt Phantom Power.\u003cbr\u003e    •    Output attenuation control (after the CineMag output transformer) allows for driving the preamp and transformers into saturation.\u003cbr\u003e    •    LED Meter gain indication.\u003cbr\u003e    •    20db pad.\u003cbr\u003e    •    External power plug.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnit Weight   2.7 kg\u003c\/li\u003e\n\u003cli\u003eUnit Size       14x4x13 inch  \/  36x10x33 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePremium Components in every Warm Audio product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen developing the WA12 MKII our ears played a big part in the design process.  Using CineMag USA transformers and an all discrete signal path ensured that the WA12 MKII would have the building blocks to compete with the best preamps on the market.  We are very proud to offer such a robust\/professional design in a small and affordable package.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2017-03-25T17:05:00+02:00","created_at":"2017-03-25T17:06:04+02:00","vendor":"Warm Audio","type":"Mic Preamp\/Dl","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$300 to $500","Shop by brand_Warm Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":46900,"price_min":46900,"price_max":46900,"available":true,"price_varies":false,"compare_at_price":59880,"compare_at_price_min":59880,"compare_at_price_max":59880,"compare_at_price_varies":false,"variants":[{"id":34817836813,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA12 MKII","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA12 MKII","public_title":null,"options":["Default Title"],"price":46900,"weight":0,"compare_at_price":59880,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"638142859301 "}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_c6aabff3f59f41b2b4bd77e5a54222c2_mv2.jpg?v=1490454897","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_f3b6b609826e459bb3758bf7005b3a46_mv2.jpg?v=1490454897","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_80191118499f4ebd982fdb68c5fe99b9_mv2.jpg?v=1490454897","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_6136353117ec40a5a85100dd58d82a15_mv2.jpg?v=1490454928","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_709d13f38afa4731846e2b9cea9df2de_mv2_2cea8dca-d85a-42a6-999a-ddac48a117d3.jpg?v=1490454939","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_f887651f7a5b4fa1b5ed2e61e9acff97_mv2.png?v=1490454957","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_9e351e6edc994e4d95bd0333e20796b9_mv2.png?v=1490454973"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_c6aabff3f59f41b2b4bd77e5a54222c2_mv2.jpg?v=1490454897","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eWarm Audio WA12 MKII\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaising The Volume.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA lot of preamps on the market do a good job of raising the volume of mics and instruments. Unfortunately, many pres are doing only that, raising volume.  The “Super clean” designs of today often leave the signal exiting the preamp sounding much the same as it did entering it.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a preamp to improve and shape your signal you will most definitely love the WA12 MKII. The WA12 MKII is designed to transform plain instruments and vocals into exciting tone.  If your mixes lack depth, struggle to sound alive, or are just missing that professional touch you’ve always wanted, there is a good chance you will love the WA12 MKII.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacked With Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA12 MKII is a completely discrete, high voltage, dual-transformer microphone preamplifier designed for high gain (+71dB), high headroom, low noise, and an exciting sonic performance – great for all types of recording applications.  A high quality mic preamp is one of the most critical pieces needed to achieve the elusive ‘larger than life’ sound, and the WA12 MKII is more than capable of delivering. \u003cbr\u003e​\u003cbr\u003eThe WA12 MKII is based around a discrete op-amp, the X731, which is our own reproduction of the vintage classic Melcor 1731, considered by some to be the warmer predecessor to the modern 2520-style op-amp.  The X731 can achieve vibrant, clean and lifelike tones; but can also be driven into mild saturation at much higher gain levels.  The effects can be subtle, but very pleasing to the ear.  The WA12 MKII can also accept any discrete op-amp on the market which conforms to the +\/-16v, 2520 pinout standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e    •    Utilizes premium grade input and output USA CineMag transformers.\u003cbr\u003e    •    71db of Gain, fully discrete signal path.\u003cbr\u003e    •    Utilizes a discrete 6-pin socketed 1731 style opamp.  Can be replaced with other 6-pin \"2520 foot-print\" opamps for varying tone\/flavor.\u003cbr\u003e    •    TONE button – Switches the input impedance from 600 ohms to 150 ohms.  Changes the tone of both the mic and HI-Z inputs.\u003cbr\u003e    •    2 Meg Ohm True HI-Z input on front panel. Sends instrument signal through entire circuit including both Cinemag Transformers and the discrete opamp. Great for guitars, bass, keyboards and other instruments that have a 1\/4″ output jack.\u003cbr\u003e    •    Mic level balanced input: XLR.\u003cbr\u003e    •    Balanced outputs: XLR and 1\/4″\/TRS.\u003cbr\u003e    •    48 volt Phantom Power.\u003cbr\u003e    •    Output attenuation control (after the CineMag output transformer) allows for driving the preamp and transformers into saturation.\u003cbr\u003e    •    LED Meter gain indication.\u003cbr\u003e    •    20db pad.\u003cbr\u003e    •    External power plug.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnit Weight   2.7 kg\u003c\/li\u003e\n\u003cli\u003eUnit Size       14x4x13 inch  \/  36x10x33 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePremium Components in every Warm Audio product.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen developing the WA12 MKII our ears played a big part in the design process.  Using CineMag USA transformers and an all discrete signal path ensured that the WA12 MKII would have the building blocks to compete with the best preamps on the market.  We are very proud to offer such a robust\/professional design in a small and affordable package.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
Warm Audio WA12 MKII

Warm Audio WA12 MKII

$469.00

Warm Audio WA12 MKII Raising The Volume. A lot of preamps on the market do a good job of raising the volume of mics and instruments. Unfortunately, many pres are doing only that, raising volume.  The “Super clean” designs of today often leave the signal exiting the preamp sounding much the same as it did entering it. If you are looking for a pre...


More Info
Sale
Warm Audio WA-412
Warm Audio WA-412

Preamps

$1,199.00 $1,798.80
{"id":9447134157,"title":"Warm Audio WA-412","handle":"warm-audio-wa-412","description":"\u003cp\u003e\u003cstrong\u003eWarm Audio | WA412\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA-412 provides 4 channels of classic American console preamps in a sleek 1RU design. This style of preamp is often referred to as \"the sound of Rock n' Roll\" for its BIG punchy low end and smooth open top end. The price\/performance ratio of the WA-412 is almost unfathomable to the experienced studio engineer who has possibly paid much more for preamps of this style during their career. Featuring fully discrete socketed 6-pin opamps and custom wound Altran USA input and output transformers, the WA-412 leaves nothing to be desired. If you are looking for multiple channels of world class tone in an affordable package, the WA-412 is the right choice for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspiration behind the WA-412.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen I first started holding regular studio sessions years ago I always desired to have more channels of high-end mic pre's. I could only afford to have one or two in my studio at a time, which was never enough to record a full band or drummer. I knew very well that if signals were not recorded well \"on the way in\" they wouldn't be salvageable later, but my budget constrained me, so many of the sources were recorded through poor-quality mic pre's.  If the WA-412 was available back then I likely wouldn't have had to settle for poor, low-quality tone. The WA-412 was designed \"for the people\" (if you will) and we believe it will become a serious work-horse in many professional and home studios. - Bryce Young (founder)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore features.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA-412 has all of the features one would expect from this style of preamp... and more. Output Trim has been added to every channel for precise control and creative gain structuring. We also added a Tone switch (transformer input impedance) to each channel, which allows you to choose the warm and punchy classic console tone, or a more open \u0026amp; neutral sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel utilizes a fully discrete socketed 6-pin opamp that can be swapped with other opamps. Discrete opamp circuitry is known for its high headroom and low distortion characteristics and has much to do with the coveted sound of these classic console preamps.  \u003cbr\u003e \u003cbr\u003eWe are proud to be using input and output transformers that are made in the USA by high-end transformer manufacturer, Altran. We worked closely with Altran to create unique transformers that extend the low frequency response of the design. The transformers also use a vintage winding technique that produces a very distinct smooth \u0026amp; open character.\u003cbr\u003e \u003cbr\u003eCarefully choosing the WA-412 components has resulted in an amazing four channel ‘workhorse’ preamp\/DI that performs at the highest levels, while still adding a touch of vintage console magic to your signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e    •    4 Channel Microphone Preamplifier + Instrument DI\u003cbr\u003e    •    Fully discrete, transformer coupled, through-hole component topology\u003cbr\u003e    •    Altran USA custom wound, premium input and output transformers\u003cbr\u003e    •    X520 discrete op-amp in every channel, socketed for convenience. Can be user-replaced with most 6 pin, discrete op-amps for varying flavor \u0026amp; tone\u003cbr\u003e    •    65db of gain\u003cbr\u003e    •    Inputs - Microphone XLR \u0026amp; Active Instrument 2Meg ohm HI-Z\u003cbr\u003e    •    Outputs - Transformer balanced XLR \u0026amp; TRS\u003cbr\u003e    •    TONE button – Input impedance switches from 600 ohms to 150 ohms (affects the tone of both the mic and HI-Z inputs)\u003cbr\u003e    •    -20db pad - pads both mic and instrument DI inputs\u003cbr\u003e    •    Self noise: \u0026lt;-90dB (nominal)\u003cbr\u003e    •    Frequency response: 20hz to 20khz \u0026lt;+\/-0.25dB (TONE button out), 20hz to 20khz +\/-2dB (TONE button in)\u003cbr\u003e    •    +48 volt phantom power\u003cbr\u003e    •    LED metering\u003cbr\u003e    •    Output trim knob for precise level control and tone sculpting\u003cbr\u003e    •    Internal power supply (grounded, 3 pin IEC cord)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnit Weight  7.7kg\u003c\/li\u003e\n\u003cli\u003eUnit Size     6x28x21 inch  \/  15x68x53 cm\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-03-25T14:34:00+02:00","created_at":"2017-03-25T14:35:18+02:00","vendor":"Warm Audio","type":"Preamps","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$1000 to $1500","Shop by brand_Warm Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Warm Audio"],"price":119900,"price_min":119900,"price_max":119900,"available":true,"price_varies":false,"compare_at_price":179880,"compare_at_price_min":179880,"compare_at_price_max":179880,"compare_at_price_varies":false,"variants":[{"id":34811606413,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WA-412","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Warm Audio WA-412","public_title":null,"options":["Default Title"],"price":119900,"weight":0,"compare_at_price":179880,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"638142859295 "}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_2ff7ded3bbaa4bc29cdd22ab5a9c73c3_mv2.jpg?v=1490445785","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_acadb3b234d845008f9bacfc7ba45a6e_mv2.jpg?v=1490445802","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_0679ff31416b4b808100e2398327f2fa_mv2.jpg?v=1490445817","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_cc9a8af954dc454ea9a897db8a276be7_mv2.jpg?v=1490445859","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_8f784b029e234137ac60453394911eb3_mv2.jpg?v=1490445867","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_6e8feee8f30644f0b3c29514cfea77cd_mv2.jpg?v=1490445897","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_b4e68325246b4b52afc8d118de505a1c_mv2.jpg?v=1490445912"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/dada90_2ff7ded3bbaa4bc29cdd22ab5a9c73c3_mv2.jpg?v=1490445785","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eWarm Audio | WA412\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA-412 provides 4 channels of classic American console preamps in a sleek 1RU design. This style of preamp is often referred to as \"the sound of Rock n' Roll\" for its BIG punchy low end and smooth open top end. The price\/performance ratio of the WA-412 is almost unfathomable to the experienced studio engineer who has possibly paid much more for preamps of this style during their career. Featuring fully discrete socketed 6-pin opamps and custom wound Altran USA input and output transformers, the WA-412 leaves nothing to be desired. If you are looking for multiple channels of world class tone in an affordable package, the WA-412 is the right choice for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInspiration behind the WA-412.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen I first started holding regular studio sessions years ago I always desired to have more channels of high-end mic pre's. I could only afford to have one or two in my studio at a time, which was never enough to record a full band or drummer. I knew very well that if signals were not recorded well \"on the way in\" they wouldn't be salvageable later, but my budget constrained me, so many of the sources were recorded through poor-quality mic pre's.  If the WA-412 was available back then I likely wouldn't have had to settle for poor, low-quality tone. The WA-412 was designed \"for the people\" (if you will) and we believe it will become a serious work-horse in many professional and home studios. - Bryce Young (founder)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore features.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe WA-412 has all of the features one would expect from this style of preamp... and more. Output Trim has been added to every channel for precise control and creative gain structuring. We also added a Tone switch (transformer input impedance) to each channel, which allows you to choose the warm and punchy classic console tone, or a more open \u0026amp; neutral sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel utilizes a fully discrete socketed 6-pin opamp that can be swapped with other opamps. Discrete opamp circuitry is known for its high headroom and low distortion characteristics and has much to do with the coveted sound of these classic console preamps.  \u003cbr\u003e \u003cbr\u003eWe are proud to be using input and output transformers that are made in the USA by high-end transformer manufacturer, Altran. We worked closely with Altran to create unique transformers that extend the low frequency response of the design. The transformers also use a vintage winding technique that produces a very distinct smooth \u0026amp; open character.\u003cbr\u003e \u003cbr\u003eCarefully choosing the WA-412 components has resulted in an amazing four channel ‘workhorse’ preamp\/DI that performs at the highest levels, while still adding a touch of vintage console magic to your signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e    •    4 Channel Microphone Preamplifier + Instrument DI\u003cbr\u003e    •    Fully discrete, transformer coupled, through-hole component topology\u003cbr\u003e    •    Altran USA custom wound, premium input and output transformers\u003cbr\u003e    •    X520 discrete op-amp in every channel, socketed for convenience. Can be user-replaced with most 6 pin, discrete op-amps for varying flavor \u0026amp; tone\u003cbr\u003e    •    65db of gain\u003cbr\u003e    •    Inputs - Microphone XLR \u0026amp; Active Instrument 2Meg ohm HI-Z\u003cbr\u003e    •    Outputs - Transformer balanced XLR \u0026amp; TRS\u003cbr\u003e    •    TONE button – Input impedance switches from 600 ohms to 150 ohms (affects the tone of both the mic and HI-Z inputs)\u003cbr\u003e    •    -20db pad - pads both mic and instrument DI inputs\u003cbr\u003e    •    Self noise: \u0026lt;-90dB (nominal)\u003cbr\u003e    •    Frequency response: 20hz to 20khz \u0026lt;+\/-0.25dB (TONE button out), 20hz to 20khz +\/-2dB (TONE button in)\u003cbr\u003e    •    +48 volt phantom power\u003cbr\u003e    •    LED metering\u003cbr\u003e    •    Output trim knob for precise level control and tone sculpting\u003cbr\u003e    •    Internal power supply (grounded, 3 pin IEC cord)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnit Weight  7.7kg\u003c\/li\u003e\n\u003cli\u003eUnit Size     6x28x21 inch  \/  15x68x53 cm\u003c\/li\u003e\n\u003c\/ul\u003e"}
Warm Audio WA-412

Warm Audio WA-412

$1,199.00

Warm Audio | WA412 The WA-412 provides 4 channels of classic American console preamps in a sleek 1RU design. This style of preamp is often referred to as "the sound of Rock n' Roll" for its BIG punchy low end and smooth open top end. The price/performance ratio of the WA-412 is almost unfathomable to the experienced studio engineer who has possi...


More Info
Universal Audio SOLO/610

Mic Preamp

$999.00
{"id":8840054285,"title":"Universal Audio SOLO\/610","handle":"universal-audio-solo-610-classic-tube-preamplifier-di-box","description":"\u003cp\u003e\u003cstrong\u003eThe all-tube 610 Console Mic Preamp sound in a rugged, “go anywhere” design.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SOLO\/610 delivers the classic Putnam 610 tube console sound in a portable, highly versatile mic preamp design. It provides the silky, vintage warmth of the original console’s mic amp design, and will flatter and enhance any microphone or instrument with its iconic tones.\u003cbr\u003e\u003cbr\u003eThanks to its convenient form factor, the SOLO\/610 can be conveniently used in the control room or the recording room, on stage, or on a desktop. Functionally lean but sonically mean, the SOLO\/610 maintains the character of the 610 console — at a price every serious project studio can afford.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the classic tube circuit of the Putnam 610 console mic preamp and DI\u003c\/li\u003e\n\u003cli\u003eAdd tube girth and detail to any mic\u003c\/li\u003e\n\u003cli\u003eSculpt signals with Gain, Level, and Impedance controls for maximum tonal variety\u003c\/li\u003e\n\u003cli\u003eCraft your sounds with classic UA tube circuits, hand-built in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClassic Putnam 610 console mic preamplifier and DI\u003c\/li\u003e\n\u003cli\u003eLegendary all-tube sound, at a project studio price\u003c\/li\u003e\n\u003cli\u003eGain, Level, and Impedance selection for maximum tonal variety\u003c\/li\u003e\n\u003cli\u003ePortable design for studio, desktop or stage\u003c\/li\u003e\n\u003cli\u003eRugged construction-steel chassis\u003c\/li\u003e\n\u003cli\u003eDI features include Thru and Mic\/Line level output\u003c\/li\u003e\n\u003cli\u003eHand-built in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance\u003c\/li\u003e\n\u003cli\u003eMic Input - Selectable 450 ohms (Lo-Z) or 1.6 kilohms (Hi-Z)\u003c\/li\u003e\n\u003cli\u003eDI Input - Selectable 2.2 megohms (Lo-Z) or 50 kilohms (Hi-Z)\u003c\/li\u003e\n\u003cli\u003eOutput Load Impedance 20 Hz to 20 kHz +\/- 1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 61 dB\u003c\/li\u003e\n\u003cli\u003eTube Complement (1) 12AX7, (1) 12AT7\u003c\/li\u003e\n\u003cli\u003eMaximum Mic Input Level -12 dBu, 1.0% THD+N Ratio\u003c\/li\u003e\n\u003cli\u003eMaximum Instrument Input Level +4 dBu, 1.0% THD+N Ratio\u003c\/li\u003e\n\u003cli\u003eMaximum Gain Mic Input 55 dB (1.6K ohm input), 60 dB (450 ohm input)\u003c\/li\u003e\n\u003cli\u003eMic\/Instrument In Frequency Response 20 Hz to 20 kHz, +\/- 0.1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain Instrument Input 37 dB\u003c\/li\u003e\n\u003cli\u003eDimensions L: 14\" W: 5 3\/4\" H: 5\"\u003c\/li\u003e\n\u003cli\u003eWeight 9 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-03-08T16:35:56+02:00","created_at":"2017-01-16T19:42:53+02:00","vendor":"Universal Audio","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Universal Audio"],"price":99900,"price_min":99900,"price_max":99900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30365965773,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"S610","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio SOLO\/610","public_title":null,"options":["Default Title"],"price":99900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/solo610_carousel_1.jpg?v=1484588680","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/solo610_carousel_2.jpg?v=1484588692"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/solo610_carousel_1.jpg?v=1484588680","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eThe all-tube 610 Console Mic Preamp sound in a rugged, “go anywhere” design.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SOLO\/610 delivers the classic Putnam 610 tube console sound in a portable, highly versatile mic preamp design. It provides the silky, vintage warmth of the original console’s mic amp design, and will flatter and enhance any microphone or instrument with its iconic tones.\u003cbr\u003e\u003cbr\u003eThanks to its convenient form factor, the SOLO\/610 can be conveniently used in the control room or the recording room, on stage, or on a desktop. Functionally lean but sonically mean, the SOLO\/610 maintains the character of the 610 console — at a price every serious project studio can afford.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the classic tube circuit of the Putnam 610 console mic preamp and DI\u003c\/li\u003e\n\u003cli\u003eAdd tube girth and detail to any mic\u003c\/li\u003e\n\u003cli\u003eSculpt signals with Gain, Level, and Impedance controls for maximum tonal variety\u003c\/li\u003e\n\u003cli\u003eCraft your sounds with classic UA tube circuits, hand-built in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClassic Putnam 610 console mic preamplifier and DI\u003c\/li\u003e\n\u003cli\u003eLegendary all-tube sound, at a project studio price\u003c\/li\u003e\n\u003cli\u003eGain, Level, and Impedance selection for maximum tonal variety\u003c\/li\u003e\n\u003cli\u003ePortable design for studio, desktop or stage\u003c\/li\u003e\n\u003cli\u003eRugged construction-steel chassis\u003c\/li\u003e\n\u003cli\u003eDI features include Thru and Mic\/Line level output\u003c\/li\u003e\n\u003cli\u003eHand-built in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance\u003c\/li\u003e\n\u003cli\u003eMic Input - Selectable 450 ohms (Lo-Z) or 1.6 kilohms (Hi-Z)\u003c\/li\u003e\n\u003cli\u003eDI Input - Selectable 2.2 megohms (Lo-Z) or 50 kilohms (Hi-Z)\u003c\/li\u003e\n\u003cli\u003eOutput Load Impedance 20 Hz to 20 kHz +\/- 1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 61 dB\u003c\/li\u003e\n\u003cli\u003eTube Complement (1) 12AX7, (1) 12AT7\u003c\/li\u003e\n\u003cli\u003eMaximum Mic Input Level -12 dBu, 1.0% THD+N Ratio\u003c\/li\u003e\n\u003cli\u003eMaximum Instrument Input Level +4 dBu, 1.0% THD+N Ratio\u003c\/li\u003e\n\u003cli\u003eMaximum Gain Mic Input 55 dB (1.6K ohm input), 60 dB (450 ohm input)\u003c\/li\u003e\n\u003cli\u003eMic\/Instrument In Frequency Response 20 Hz to 20 kHz, +\/- 0.1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain Instrument Input 37 dB\u003c\/li\u003e\n\u003cli\u003eDimensions L: 14\" W: 5 3\/4\" H: 5\"\u003c\/li\u003e\n\u003cli\u003eWeight 9 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e"}
Universal Audio SOLO/610

Universal Audio SOLO/610

$999.00

The all-tube 610 Console Mic Preamp sound in a rugged, “go anywhere” design. The SOLO/610 delivers the classic Putnam 610 tube console sound in a portable, highly versatile mic preamp design. It provides the silky, vintage warmth of the original console’s mic amp design, and will flatter and enhance any microphone or instrument with its iconic t...


More Info
Universal Audio LA-610 MKII

Channel Strip

$1,599.00
{"id":8839330317,"title":"Universal Audio LA-610 MKII","handle":"universal-audio-la-610-mkii-classic-tube-recording-channel","description":"\u003cp\u003e\u003cstrong\u003eA classic tube mic preamp \u0026amp; LA-2A-style compressor in a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LA-610 MkII combines a hand-built in the USA, all-tube, vintage mic preamp design — heard on classic albums by Coldplay, The Beach Boys, and Van Halen — with authentic Teletronix T4 opto-compression circuitry.\u003cbr\u003e\u003cbr\u003eThis classic channel strip design, with its warm preamp tone and smooth, natural-sounding compression, is updated with modern, user-requested features like true compressor bypass, larger metering, increased output, and an auto-switching power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the all-tube mic preamp derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eCompress signals with authentic Teletronix T4 opto-compression tube circuitry\u003c\/li\u003e\n\u003cli\u003eShape your tones further with High and Low frequency shelving tube EQ\u003c\/li\u003e\n\u003cli\u003eRecord your tracks through vintage UA, \"handmade in the USA,\" circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToneful Tube Compression\u003c\/strong\u003e\u003cbr\u003eThe LA-610 Mk II’s T4 tube compressor provides the same ultra-warm limiting that has made the Teletronix LA-2A the king of fat opto compression. The electro-optical detector, or \"T4 cell,” is the heart and soul of the Teletronix LA-2A. Its photo resistors are the crucial circuit components, giving the compressor its signature warmth, making it a “go-to” for tracking vocals, bass, or acoustic guitars. Taken together, it’s impossible to get a bad sound out of the LA-610 MkII’s legendary preamp and compression circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003eAll-tube mic preamp design derived from legendary Bill Putnam-designed 610 modular console\u003cbr\u003eAuthentic Teletronix LA-2A-style T4 opto-compressor section\u003cbr\u003eMkII exclusive features include: true compressor bypass, larger metering, increased output, and auto-switching power supply\u003cbr\u003eMic pre with Gain and Level controls, variable impedance switching, and instrument DI for recording tone “color”\u003cbr\u003eHigh and Low frequency shelving EQ\u003cbr\u003eComplete vintage channel strip at groundbreaking price within project studio reach\u003cbr\u003eUA build quality and heritage, audiophile components, hand-assembled in the USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMkII Improvements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue Bypass of the Compressor Circuit\u003c\/li\u003e\n\u003cli\u003eLarger and Better Lit Metering\u003c\/li\u003e\n\u003cli\u003eImproved Output Signal Performance\u003c\/li\u003e\n\u003cli\u003eAuto-Sensing Universal Power Supply\u003c\/li\u003e\n\u003cli\u003eImproved stability with feedback-style shelving EQ\u003c\/li\u003e\n\u003cli\u003eImproved consistency with Input Gain values\u003c\/li\u003e\n\u003cli\u003eLED Jewel Light Never Needs Replacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic, Line and Hi-Z Input, Line Output\u003c\/li\u003e\n\u003cli\u003eDual Impedance Mic and Hi-Z inputs (Mic: 2K, 500Ω, Hi-Z: 2.2M, 47KΩ)\u003c\/li\u003e\n\u003cli\u003e5 position Stepped Preamp Input Gain, Continuous Preamp Output Level\u003c\/li\u003e\n\u003cli\u003e-15dB Pad Switch (15dB Pad\/Off)\u003c\/li\u003e\n\u003cli\u003ePhase reverse (0\/180º)\u003c\/li\u003e\n\u003cli\u003e48 volt Phantom Power switch (+48v\/Off)\u003c\/li\u003e\n\u003cli\u003e+\/- 9 dB stepped High Shelving Filter (4.5, 7, 10 kHz)\u003c\/li\u003e\n\u003cli\u003e+\/- 9 dB stepped Low Shelving Filter (70, 100, 200 Hz)\u003c\/li\u003e\n\u003cli\u003eT4 Optical Compressor with Continuous Peak Reduction and Makeup Gain\u003c\/li\u003e\n\u003cli\u003eCompress\/Limit\/Bypass Modes of Dynamic Operation (3:1 \/ ∞: 1)\u003c\/li\u003e\n\u003cli\u003eMeter Source Selector Switch (Preamp\/Gain Reduction\/Compressor)\u003c\/li\u003e\n\u003cli\u003eFront Panel Power switch (On\/Off)\u003c\/li\u003e\n\u003cli\u003eCustom Altran and Cinemag Transformers\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-03-08T16:35:55+02:00","created_at":"2017-01-16T18:37:46+02:00","vendor":"Universal Audio","type":"Channel Strip","tags":["Preamps","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Universal Audio"],"price":159900,"price_min":159900,"price_max":159900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30363609933,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LA610","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio LA-610 MKII","public_title":null,"options":["Default Title"],"price":159900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/la-610_mkii_carousel_1.jpg?v=1484586465","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/la-610_mkii_carousel_2.jpg?v=1484586486","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/la-610_mkii_carousel_3.jpg?v=1484586501"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/la-610_mkii_carousel_1.jpg?v=1484586465","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eA classic tube mic preamp \u0026amp; LA-2A-style compressor in a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LA-610 MkII combines a hand-built in the USA, all-tube, vintage mic preamp design — heard on classic albums by Coldplay, The Beach Boys, and Van Halen — with authentic Teletronix T4 opto-compression circuitry.\u003cbr\u003e\u003cbr\u003eThis classic channel strip design, with its warm preamp tone and smooth, natural-sounding compression, is updated with modern, user-requested features like true compressor bypass, larger metering, increased output, and an auto-switching power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the all-tube mic preamp derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eCompress signals with authentic Teletronix T4 opto-compression tube circuitry\u003c\/li\u003e\n\u003cli\u003eShape your tones further with High and Low frequency shelving tube EQ\u003c\/li\u003e\n\u003cli\u003eRecord your tracks through vintage UA, \"handmade in the USA,\" circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eToneful Tube Compression\u003c\/strong\u003e\u003cbr\u003eThe LA-610 Mk II’s T4 tube compressor provides the same ultra-warm limiting that has made the Teletronix LA-2A the king of fat opto compression. The electro-optical detector, or \"T4 cell,” is the heart and soul of the Teletronix LA-2A. Its photo resistors are the crucial circuit components, giving the compressor its signature warmth, making it a “go-to” for tracking vocals, bass, or acoustic guitars. Taken together, it’s impossible to get a bad sound out of the LA-610 MkII’s legendary preamp and compression circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003eAll-tube mic preamp design derived from legendary Bill Putnam-designed 610 modular console\u003cbr\u003eAuthentic Teletronix LA-2A-style T4 opto-compressor section\u003cbr\u003eMkII exclusive features include: true compressor bypass, larger metering, increased output, and auto-switching power supply\u003cbr\u003eMic pre with Gain and Level controls, variable impedance switching, and instrument DI for recording tone “color”\u003cbr\u003eHigh and Low frequency shelving EQ\u003cbr\u003eComplete vintage channel strip at groundbreaking price within project studio reach\u003cbr\u003eUA build quality and heritage, audiophile components, hand-assembled in the USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMkII Improvements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrue Bypass of the Compressor Circuit\u003c\/li\u003e\n\u003cli\u003eLarger and Better Lit Metering\u003c\/li\u003e\n\u003cli\u003eImproved Output Signal Performance\u003c\/li\u003e\n\u003cli\u003eAuto-Sensing Universal Power Supply\u003c\/li\u003e\n\u003cli\u003eImproved stability with feedback-style shelving EQ\u003c\/li\u003e\n\u003cli\u003eImproved consistency with Input Gain values\u003c\/li\u003e\n\u003cli\u003eLED Jewel Light Never Needs Replacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMic, Line and Hi-Z Input, Line Output\u003c\/li\u003e\n\u003cli\u003eDual Impedance Mic and Hi-Z inputs (Mic: 2K, 500Ω, Hi-Z: 2.2M, 47KΩ)\u003c\/li\u003e\n\u003cli\u003e5 position Stepped Preamp Input Gain, Continuous Preamp Output Level\u003c\/li\u003e\n\u003cli\u003e-15dB Pad Switch (15dB Pad\/Off)\u003c\/li\u003e\n\u003cli\u003ePhase reverse (0\/180º)\u003c\/li\u003e\n\u003cli\u003e48 volt Phantom Power switch (+48v\/Off)\u003c\/li\u003e\n\u003cli\u003e+\/- 9 dB stepped High Shelving Filter (4.5, 7, 10 kHz)\u003c\/li\u003e\n\u003cli\u003e+\/- 9 dB stepped Low Shelving Filter (70, 100, 200 Hz)\u003c\/li\u003e\n\u003cli\u003eT4 Optical Compressor with Continuous Peak Reduction and Makeup Gain\u003c\/li\u003e\n\u003cli\u003eCompress\/Limit\/Bypass Modes of Dynamic Operation (3:1 \/ ∞: 1)\u003c\/li\u003e\n\u003cli\u003eMeter Source Selector Switch (Preamp\/Gain Reduction\/Compressor)\u003c\/li\u003e\n\u003cli\u003eFront Panel Power switch (On\/Off)\u003c\/li\u003e\n\u003cli\u003eCustom Altran and Cinemag Transformers\u003c\/li\u003e\n\u003c\/ul\u003e"}
Universal Audio LA-610 MKII

Universal Audio LA-610 MKII

$1,599.00

A classic tube mic preamp & LA-2A-style compressor in a single unit. The LA-610 MkII combines a hand-built in the USA, all-tube, vintage mic preamp design — heard on classic albums by Coldplay, The Beach Boys, and Van Halen — with authentic Teletronix T4 opto-compression circuitry.This classic channel strip design, with its warm preamp tone ...


More Info
Universal Audio 710 Twin-Finity

Mic Preamp

$799.00
{"id":8839873869,"title":"Universal Audio 710 Twin-Finity","handle":"universal-audio-710-twin-finity-tone-blending-mic-preamplifier","description":"\u003cp\u003e\u003cstrong\u003eGet tube and solid-state sonics and everything in-between with this unique mic pre\/DI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe award-winning 710 Twin-Finity™ is a radical UA mic preamp design that combines both the classic retro warmth of tubes with the transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps.\u003cbr\u003e\u003cbr\u003eTone blending is continually variable between 100% tube and 100% solid-state, offering a practically infinite range of unique preamp tones, plus the ability to easily dial-in your own signature sound. There are lots of sensibly priced solid-state and tube preamplifiers out there, but the 710 Twin-Finity is the only one that offers the best of both worlds — as well as everything in-between — all in one box, and within reach of any serious project studio’s budget. Includes a 19\" rack-kit for mounting one or two units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHarness the distinct sonic properties of tubes and solid-state in one unique preamp\/DI\u003c\/li\u003e\n\u003cli\u003eBlend between tube and solid-state sounds for myriad textures and tones\u003c\/li\u003e\n\u003cli\u003eUnlock the potential of your mic locker with a powerfully versatile preamp\u003c\/li\u003e\n\u003cli\u003eEasily track guitar, bass, or keyboards with the front panel 1\/4“ Hi-Z instrument input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrive for Days\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLike all our other preamp designs, the 710 features dual gain-stage controls (Gain\/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique \"Drive\" mode allowing you to see how hard you are driving the input stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwin-Finity™ Tone-Blending Mic\/Line Preamp \u0026amp; Hi-Z Instrument DI\u003c\/li\u003e\n\u003cli\u003eDual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp\u003c\/li\u003e\n\u003cli\u003ePhase-Aligned \"Tone-Blending\" of Tube and Solid State\u003c\/li\u003e\n\u003cli\u003eDual Gain Stages: Wire with Gain to Creamy to Crunchy\u003c\/li\u003e\n\u003cli\u003eDiscrete JFET DI with 2.2M ohm Ultra Hi-Z impedance\u003c\/li\u003e\n\u003cli\u003eMonolithic Balanced Output Stage\u003c\/li\u003e\n\u003cli\u003e70dB+ of gain, +48V Phantom, Pad(-15dB), Phase Invert, and Low Cut Filter(75Hz)\u003c\/li\u003e\n\u003cli\u003eOutput and \"Drive\" backlit VU metering\u003c\/li\u003e\n\u003cli\u003ePortable, Rack-Mountable design for Studio, Desktop or Stage\u003c\/li\u003e\n\u003cli\u003e19” Rack Kit Included\u003c\/li\u003e\n\u003cli\u003eFront Panel Hi-Z Input (switched from Mic\/Line automatically via Jack Detect)\u003c\/li\u003e\n\u003cli\u003eRear Panel XLR Mic Input, XLR Line Input and XLR Line Output\u003c\/li\u003e\n\u003cli\u003eUniversal Internal Power Supply\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Metal Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInputs\u003c\/li\u003e\n\u003cli\u003eMicrophone (Female XLR) \u003c\/li\u003e\n\u003cli\u003eBalanced Line (Female XLR) \u003c\/li\u003e\n\u003cli\u003eUnbalanced Instrument (1\/4\" jack) (D.I.)\u003c\/li\u003e\n\u003cli\u003eOutputs\u003c\/li\u003e\n\u003cli\u003eBalanced Line (Male XLR) \u003c\/li\u003e\n\u003cli\u003eTube Complement\u003c\/li\u003e\n\u003cli\u003e12ax7\u003c\/li\u003e\n\u003cli\u003ePad\u003c\/li\u003e\n\u003cli\u003e-15dB\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter\u003c\/li\u003e\n\u003cli\u003e75Hz\u003c\/li\u003e\n\u003cli\u003eMaximum Power Consumption\u003c\/li\u003e\n\u003cli\u003e160mA @120VAC, 20W\u003c\/li\u003e\n\u003cli\u003ePower Requirements\u003c\/li\u003e\n\u003cli\u003e100-240VAC\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003e8.45W x 3.5H x 10.25D\u003c\/li\u003e\n\u003cli\u003eWeight\u003c\/li\u003e\n\u003cli\u003e5.25 lb\u003c\/li\u003e\n\u003cli\u003eImpedance\u003c\/li\u003e\n\u003cli\u003eMic Input Impedance\u003c\/li\u003e\n\u003cli\u003e2K ohms\u003c\/li\u003e\n\u003cli\u003eLine Input Impedance\u003c\/li\u003e\n\u003cli\u003e10K ohms\u003c\/li\u003e\n\u003cli\u003eHi-Z Input Impedance\u003c\/li\u003e\n\u003cli\u003e2.2M ohms\u003c\/li\u003e\n\u003cli\u003eInternal Output Impedance\u003c\/li\u003e\n\u003cli\u003e600 ohms\u003c\/li\u003e\n\u003cli\u003eGain\/Levels\u003c\/li\u003e\n\u003cli\u003eGain Range for Unit\u003c\/li\u003e\n\u003cli\u003e-Infinity to 70dBu\u003c\/li\u003e\n\u003cli\u003eMic Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e10 ~ 60 dBu\u003c\/li\u003e\n\u003cli\u003eLine Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e-10 ~ 40 dBu\u003c\/li\u003e\n\u003cli\u003eHi-Z Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e-10 ~ 40 dBu\u003c\/li\u003e\n\u003cli\u003eFrequency Response\u003c\/li\u003e\n\u003cli\u003eMic Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003cli\u003eLine Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003cli\u003eHi-Z Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDistortion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMin THD+Noise @ +4dBU\u003cbr\u003e0.1% tube 0.005% solid-state\u003c\/p\u003e","published_at":"2018-03-08T16:35:56+02:00","created_at":"2017-01-16T19:32:39+02:00","vendor":"Universal Audio","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Universal Audio"],"price":79900,"price_min":79900,"price_max":79900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30365588813,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"710FT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio 710 Twin-Finity","public_title":null,"options":["Default Title"],"price":79900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/710_twinfinity_carousel_1.jpg?v=1484588234","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/710_twinfinity_carousel_2.jpg?v=1484588248","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/710_twinfinity_carousel_3.jpg?v=1484588260"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/710_twinfinity_carousel_1.jpg?v=1484588234","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eGet tube and solid-state sonics and everything in-between with this unique mic pre\/DI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe award-winning 710 Twin-Finity™ is a radical UA mic preamp design that combines both the classic retro warmth of tubes with the transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps.\u003cbr\u003e\u003cbr\u003eTone blending is continually variable between 100% tube and 100% solid-state, offering a practically infinite range of unique preamp tones, plus the ability to easily dial-in your own signature sound. There are lots of sensibly priced solid-state and tube preamplifiers out there, but the 710 Twin-Finity is the only one that offers the best of both worlds — as well as everything in-between — all in one box, and within reach of any serious project studio’s budget. Includes a 19\" rack-kit for mounting one or two units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHarness the distinct sonic properties of tubes and solid-state in one unique preamp\/DI\u003c\/li\u003e\n\u003cli\u003eBlend between tube and solid-state sounds for myriad textures and tones\u003c\/li\u003e\n\u003cli\u003eUnlock the potential of your mic locker with a powerfully versatile preamp\u003c\/li\u003e\n\u003cli\u003eEasily track guitar, bass, or keyboards with the front panel 1\/4“ Hi-Z instrument input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrive for Days\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLike all our other preamp designs, the 710 features dual gain-stage controls (Gain\/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique \"Drive\" mode allowing you to see how hard you are driving the input stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwin-Finity™ Tone-Blending Mic\/Line Preamp \u0026amp; Hi-Z Instrument DI\u003c\/li\u003e\n\u003cli\u003eDual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp\u003c\/li\u003e\n\u003cli\u003ePhase-Aligned \"Tone-Blending\" of Tube and Solid State\u003c\/li\u003e\n\u003cli\u003eDual Gain Stages: Wire with Gain to Creamy to Crunchy\u003c\/li\u003e\n\u003cli\u003eDiscrete JFET DI with 2.2M ohm Ultra Hi-Z impedance\u003c\/li\u003e\n\u003cli\u003eMonolithic Balanced Output Stage\u003c\/li\u003e\n\u003cli\u003e70dB+ of gain, +48V Phantom, Pad(-15dB), Phase Invert, and Low Cut Filter(75Hz)\u003c\/li\u003e\n\u003cli\u003eOutput and \"Drive\" backlit VU metering\u003c\/li\u003e\n\u003cli\u003ePortable, Rack-Mountable design for Studio, Desktop or Stage\u003c\/li\u003e\n\u003cli\u003e19” Rack Kit Included\u003c\/li\u003e\n\u003cli\u003eFront Panel Hi-Z Input (switched from Mic\/Line automatically via Jack Detect)\u003c\/li\u003e\n\u003cli\u003eRear Panel XLR Mic Input, XLR Line Input and XLR Line Output\u003c\/li\u003e\n\u003cli\u003eUniversal Internal Power Supply\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Metal Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInputs\u003c\/li\u003e\n\u003cli\u003eMicrophone (Female XLR) \u003c\/li\u003e\n\u003cli\u003eBalanced Line (Female XLR) \u003c\/li\u003e\n\u003cli\u003eUnbalanced Instrument (1\/4\" jack) (D.I.)\u003c\/li\u003e\n\u003cli\u003eOutputs\u003c\/li\u003e\n\u003cli\u003eBalanced Line (Male XLR) \u003c\/li\u003e\n\u003cli\u003eTube Complement\u003c\/li\u003e\n\u003cli\u003e12ax7\u003c\/li\u003e\n\u003cli\u003ePad\u003c\/li\u003e\n\u003cli\u003e-15dB\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter\u003c\/li\u003e\n\u003cli\u003e75Hz\u003c\/li\u003e\n\u003cli\u003eMaximum Power Consumption\u003c\/li\u003e\n\u003cli\u003e160mA @120VAC, 20W\u003c\/li\u003e\n\u003cli\u003ePower Requirements\u003c\/li\u003e\n\u003cli\u003e100-240VAC\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003e8.45W x 3.5H x 10.25D\u003c\/li\u003e\n\u003cli\u003eWeight\u003c\/li\u003e\n\u003cli\u003e5.25 lb\u003c\/li\u003e\n\u003cli\u003eImpedance\u003c\/li\u003e\n\u003cli\u003eMic Input Impedance\u003c\/li\u003e\n\u003cli\u003e2K ohms\u003c\/li\u003e\n\u003cli\u003eLine Input Impedance\u003c\/li\u003e\n\u003cli\u003e10K ohms\u003c\/li\u003e\n\u003cli\u003eHi-Z Input Impedance\u003c\/li\u003e\n\u003cli\u003e2.2M ohms\u003c\/li\u003e\n\u003cli\u003eInternal Output Impedance\u003c\/li\u003e\n\u003cli\u003e600 ohms\u003c\/li\u003e\n\u003cli\u003eGain\/Levels\u003c\/li\u003e\n\u003cli\u003eGain Range for Unit\u003c\/li\u003e\n\u003cli\u003e-Infinity to 70dBu\u003c\/li\u003e\n\u003cli\u003eMic Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e10 ~ 60 dBu\u003c\/li\u003e\n\u003cli\u003eLine Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e-10 ~ 40 dBu\u003c\/li\u003e\n\u003cli\u003eHi-Z Range Gain Pot\u003c\/li\u003e\n\u003cli\u003e-10 ~ 40 dBu\u003c\/li\u003e\n\u003cli\u003eFrequency Response\u003c\/li\u003e\n\u003cli\u003eMic Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003cli\u003eLine Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003cli\u003eHi-Z Frequency Response\u003c\/li\u003e\n\u003cli\u003e20Hz to 100kHz +\/- 0.2 dBu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDistortion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMin THD+Noise @ +4dBU\u003cbr\u003e0.1% tube 0.005% solid-state\u003c\/p\u003e"}
Universal Audio 710 Twin-Finity

Universal Audio 710 Twin-Finity

$799.00

Get tube and solid-state sonics and everything in-between with this unique mic pre/DI. The award-winning 710 Twin-Finity™ is a radical UA mic preamp design that combines both the classic retro warmth of tubes with the transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created specifically to add the tonal versatility and son...


More Info
{"id":8839494797,"title":"Universal Audio 6176 Vintage Channel Strip","handle":"universal-audio-6176-vintage-channel-strip","description":"\u003cp\u003e\u003cstrong\u003eA classic tube microphone preamp and 1176LN compressor in a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6176 Vintage Channel Strip combines the alluring, all-tube sounds of the legendary Bill Putnam-designed 610 microphone preamp, with the signature FET compression of our 1176LN, to create the ultimate recording channel strip.\u003cbr\u003e\u003cbr\u003eThe warm, smooth tones of this mic preamp design — employed to record everyone from Frank Sinatra to Van Halen — and the unique characteristics of the compressor, are two major reasons why the 6176 is found in studios around the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the all-tube mic preamp derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eCompress signals with the 1176LN Class A FET compressor section — heard on countless hit records for more than 40 years\u003c\/li\u003e\n\u003cli\u003eUse the \"Split\" or \"Join\" switch for separate or series operation of the preamp and compressor\u003c\/li\u003e\n\u003cli\u003eShape your tracks through vintage UA, \"handmade in the USA,\" circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe 610B — A World Renowned Mic Preamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe 2-610 microphone and instrument preamplifier has received praise from many corners. Michael Cooper, in his review for Mix Magazine, called it \"hands-down, the most dimensional mic preamp I've ever heard\". Peter Wade, engineer\/producer who has worked with acts ranging from Wyclef Jean to Jennifer Lopez, said simply, \"This box rocks.\" The 6176 mic preamp sections maintains the quality and character of the 2-610 while adding high-tension power regulation for improved bass response and a front-panel 15db pad switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 1176LN — A Compressor with Tone\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAs legendary engineer\/producer Andy Johns put it, \"The 1176LN is the workhorse compressor.\" In fact, the 1176LN may well be the most loved compressor in history. Its trademark lightning-quick attack and release times and the tone of it's Class A output amplifier have enhanced countless recordings over the last thirty-five years. We've recreated the 1176LN for the compressor section of the 6176 with the same exacting, attention to detail and tradition we use on our 1176LN. The resulting character, heritage and tone simply cannot be found on other channel strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-tube mic preamp section derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eSignature 1176LN Class A FET compressor section — heard on countless hit records for more than 40 years\u003c\/li\u003e\n\u003cli\u003e\"Split\" or \"Join\" switch allows separate or series operation of the preamp and compressor\u003c\/li\u003e\n\u003cli\u003eHigh and Low frequency shelving EQ\u003c\/li\u003e\n\u003cli\u003eVariable impedance Input, Gain, and Output levels\u003c\/li\u003e\n\u003cli\u003eMic, balanced Line, and Hi-Z inputs\u003c\/li\u003e\n\u003cli\u003eUltra-quiet operation\u003c\/li\u003e\n\u003cli\u003eStereo interconnection via 1176-SA\u003c\/li\u003e\n\u003cli\u003eHand-built in USA; backed by 1-Year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreamp:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone Input Impedance: Selectable, 500 Ω(ohms) or 2k\u003c\/li\u003e\n\u003cli\u003eBalanced Line Input Impedance: 20k Ω\u003c\/li\u003e\n\u003cli\u003eHi-Z Input Impedance: Selectable between 2.2 M Ω or 47 k Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Microphone Input Level: +18 dBu (2k input impedance and 15 dB Pad in)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +20 dBm\u003c\/li\u003e\n\u003cli\u003eInternal Output Impedance: 80 Ω\u003c\/li\u003e\n\u003cli\u003eRecommended Minimum Load: 600 Ω\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz +0, -1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 65 dB (500 Ω input impedance)\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio \u0026gt; 90 dB (@ maximum gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLimiting Amplifier:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: Selectable, 15k Ω (ohms) or 600 Ω\u003c\/li\u003e\n\u003cli\u003eOutput Load: Impedance 600 Ω (floating)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz ± 1 dB\u003c\/li\u003e\n\u003cli\u003eGain: 40 dB, ± 1 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026gt; 0.5% T.H.D. from 50 Hz – 15 kHz with limiting, at 1.1 seconds release setting. Output of +22 dBm with no greater than 0.5% T.H.D.\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio: \u0026gt; 75 dB\u003c\/li\u003e\n\u003cli\u003eAttack Time: Adjustable, from 20 to 800 microseconds\u003c\/li\u003e\n\u003cli\u003eRelease Time: Adjustable, from 50 milliseconds to 1.1 seconds\u003c\/li\u003e\n\u003cli\u003eStereo Interconnection: Optional, using 1176SA stereo interconnect accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube Complement: (1) 12AX7A, (1) 12AT7A\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 115V\/230V\u003c\/li\u003e\n\u003cli\u003ePower Connector: Detachable IEC power cable.\u003c\/li\u003e\n\u003cli\u003eFuse: 400 mA time delay (slow blow) \/ 115 V200 mA time delay (slow blow) \/ 230 V\u003c\/li\u003e\n\u003cli\u003ePower Indicator Light: 28 V bulb (type 1819)\u003c\/li\u003e\n\u003cli\u003eDimensions 1: 9\" W x 3.5\" H x 12.25\" D (two rack unit)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-03-08T16:35:55+02:00","created_at":"2017-01-16T19:11:21+02:00","vendor":"Universal Audio","type":"Channel Strip","tags":["Preamps","Preamps \u0026 Channel Strips","Shop by brand_Universal Audio","Shop by category_Channel Strips","Shop by category_Preamps","Studio \u0026 Recording","Universal Audio"],"price":249900,"price_min":249900,"price_max":249900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30364586509,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6176","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Universal Audio 6176 Vintage Channel Strip","public_title":null,"options":["Default Title"],"price":249900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_vin_chan_carousel_1.jpg?v=1484586950","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_vin_chan_carousel_2.jpg?v=1484586968","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_vin_chan_carousel_3.jpg?v=1484586985","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_channel_strip_feature_1_1.jpg?v=1484587003","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_channel_strip_feature_2_1.jpg?v=1484587016"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/6176_vin_chan_carousel_1.jpg?v=1484586950","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eA classic tube microphone preamp and 1176LN compressor in a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 6176 Vintage Channel Strip combines the alluring, all-tube sounds of the legendary Bill Putnam-designed 610 microphone preamp, with the signature FET compression of our 1176LN, to create the ultimate recording channel strip.\u003cbr\u003e\u003cbr\u003eThe warm, smooth tones of this mic preamp design — employed to record everyone from Frank Sinatra to Van Halen — and the unique characteristics of the compressor, are two major reasons why the 6176 is found in studios around the world.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord through the all-tube mic preamp derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eCompress signals with the 1176LN Class A FET compressor section — heard on countless hit records for more than 40 years\u003c\/li\u003e\n\u003cli\u003eUse the \"Split\" or \"Join\" switch for separate or series operation of the preamp and compressor\u003c\/li\u003e\n\u003cli\u003eShape your tracks through vintage UA, \"handmade in the USA,\" circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe 610B — A World Renowned Mic Preamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe 2-610 microphone and instrument preamplifier has received praise from many corners. Michael Cooper, in his review for Mix Magazine, called it \"hands-down, the most dimensional mic preamp I've ever heard\". Peter Wade, engineer\/producer who has worked with acts ranging from Wyclef Jean to Jennifer Lopez, said simply, \"This box rocks.\" The 6176 mic preamp sections maintains the quality and character of the 2-610 while adding high-tension power regulation for improved bass response and a front-panel 15db pad switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 1176LN — A Compressor with Tone\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAs legendary engineer\/producer Andy Johns put it, \"The 1176LN is the workhorse compressor.\" In fact, the 1176LN may well be the most loved compressor in history. Its trademark lightning-quick attack and release times and the tone of it's Class A output amplifier have enhanced countless recordings over the last thirty-five years. We've recreated the 1176LN for the compressor section of the 6176 with the same exacting, attention to detail and tradition we use on our 1176LN. The resulting character, heritage and tone simply cannot be found on other channel strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-tube mic preamp section derived from legendary Bill Putnam-designed 610 modular console\u003c\/li\u003e\n\u003cli\u003eSignature 1176LN Class A FET compressor section — heard on countless hit records for more than 40 years\u003c\/li\u003e\n\u003cli\u003e\"Split\" or \"Join\" switch allows separate or series operation of the preamp and compressor\u003c\/li\u003e\n\u003cli\u003eHigh and Low frequency shelving EQ\u003c\/li\u003e\n\u003cli\u003eVariable impedance Input, Gain, and Output levels\u003c\/li\u003e\n\u003cli\u003eMic, balanced Line, and Hi-Z inputs\u003c\/li\u003e\n\u003cli\u003eUltra-quiet operation\u003c\/li\u003e\n\u003cli\u003eStereo interconnection via 1176-SA\u003c\/li\u003e\n\u003cli\u003eHand-built in USA; backed by 1-Year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePreamp:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone Input Impedance: Selectable, 500 Ω(ohms) or 2k\u003c\/li\u003e\n\u003cli\u003eBalanced Line Input Impedance: 20k Ω\u003c\/li\u003e\n\u003cli\u003eHi-Z Input Impedance: Selectable between 2.2 M Ω or 47 k Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Microphone Input Level: +18 dBu (2k input impedance and 15 dB Pad in)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +20 dBm\u003c\/li\u003e\n\u003cli\u003eInternal Output Impedance: 80 Ω\u003c\/li\u003e\n\u003cli\u003eRecommended Minimum Load: 600 Ω\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz +0, -1 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 65 dB (500 Ω input impedance)\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio \u0026gt; 90 dB (@ maximum gain)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLimiting Amplifier:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: Selectable, 15k Ω (ohms) or 600 Ω\u003c\/li\u003e\n\u003cli\u003eOutput Load: Impedance 600 Ω (floating)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz to 20 kHz ± 1 dB\u003c\/li\u003e\n\u003cli\u003eGain: 40 dB, ± 1 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026gt; 0.5% T.H.D. from 50 Hz – 15 kHz with limiting, at 1.1 seconds release setting. Output of +22 dBm with no greater than 0.5% T.H.D.\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio: \u0026gt; 75 dB\u003c\/li\u003e\n\u003cli\u003eAttack Time: Adjustable, from 20 to 800 microseconds\u003c\/li\u003e\n\u003cli\u003eRelease Time: Adjustable, from 50 milliseconds to 1.1 seconds\u003c\/li\u003e\n\u003cli\u003eStereo Interconnection: Optional, using 1176SA stereo interconnect accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube Complement: (1) 12AX7A, (1) 12AT7A\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 115V\/230V\u003c\/li\u003e\n\u003cli\u003ePower Connector: Detachable IEC power cable.\u003c\/li\u003e\n\u003cli\u003eFuse: 400 mA time delay (slow blow) \/ 115 V200 mA time delay (slow blow) \/ 230 V\u003c\/li\u003e\n\u003cli\u003ePower Indicator Light: 28 V bulb (type 1819)\u003c\/li\u003e\n\u003cli\u003eDimensions 1: 9\" W x 3.5\" H x 12.25\" D (two rack unit)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb.\u003c\/li\u003e\n\u003c\/ul\u003e"}
Universal Audio 6176 Vintage Channel Strip

Universal Audio 6176 Vintage Channel Strip

$2,499.00

A classic tube microphone preamp and 1176LN compressor in a single unit. The 6176 Vintage Channel Strip combines the alluring, all-tube sounds of the legendary Bill Putnam-designed 610 microphone preamp, with the signature FET compression of our 1176LN, to create the ultimate recording channel strip.The warm, smooth tones of this mic preamp desi...


More Info
Solid State Logic XLogic Alpha Channel

Analogue processors

$1,188.60
{"id":9456041165,"title":"Solid State Logic XLogic Alpha Channel","handle":"ssl-alpha-channel","description":"Analogue Hit Maker\u003cbr\u003e\u003cbr\u003eIt's time to show your DAW who's boss\u003cbr\u003e ✓ SSL analogue channel processing for your audio workstation\u003cbr\u003e ✓ Pro mic preamp with line and instrument level switching\u003cbr\u003e ✓ Studio class EQ, Filter and Limiter sections\u003cbr\u003e ✓ Variable Harmonic Drive circuit - a time machine of distortion characteristics\u003cbr\u003e ✓ Analogue or digital outputs direct to your DAW\u003cbr\u003e\u003cbr\u003eAll great sounding recordings have to start somewhere...\u003cbr\u003eWith the classic combination of a mic preamp, filter, EQ and dynamics, the XLogic Alpha Channel brings SSL’s sonic legacy bang up to date in an analogue channel strip designed to provide the perfect front end to your digital audio workstation.\u003cbr\u003eWith all the features needed to record great vocal or instrument tracks, the Alpha Channel offers a studio class mic pre and processing based on SSL’s years of experience in designing the world’s leading analogue recording consoles. A huge proportion of the music you know and love was recorded on SSL, renowned for the superior audio qualities you’ve heard on countless hit records. That elusive sonic ingredient is here in the Alpha Channel.\u003cbr\u003e\u003cbr\u003eKey Features\u003cbr\u003e ✓ Professional ultra clean mic preamp with line level \u0026amp; Hi Z instrument input switches\u003cbr\u003e ✓ ‘Variable Harmonic Drive’ circuit; a Time Machine of distortion characteristics\u003cbr\u003e ✓ High Pass Filter with selectable 40Hz, 80Hz or 120Hz cutoff frequency\u003cbr\u003e ✓ Built in professional quality Analogue to Digital conversion - as standard\u003cbr\u003e ✓ Auto sample rate sensing and self adjustment\u003cbr\u003e ✓ Three band SSL parametric EQ with mid freq Q control and dual LF curves\u003cbr\u003e ✓ Intelligent auto compression that maximises recording headroom and avoids DAC clipping","published_at":"2017-03-26T19:04:00+02:00","created_at":"2017-03-26T19:04:56+02:00","vendor":"Solid State Logic","type":"Analogue processors","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$1000 to $1500","Shop by brand_Solid State Logic","Shop by category_Channel Strips","Shop by category_Preamps","Solid State Logic","Studio \u0026 Recording"],"price":118860,"price_min":118860,"price_max":118860,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34875359437,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid State Logic XLogic Alpha Channel","public_title":null,"options":["Default Title"],"price":118860,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"729999XX"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Alpha_Channel_FRONT.jpg?v=1528851078","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/alpha_channel_front_large_45ea39f7-64f4-4cb1-baea-ec56036eea39.jpg?v=1528851078","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/alpha_channel_rear_large_4dc94a44-e441-4663-a480-f4f02f982747.jpg?v=1528851078"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Alpha_Channel_FRONT.jpg?v=1528851078","options":["Title"],"content":"Analogue Hit Maker\u003cbr\u003e\u003cbr\u003eIt's time to show your DAW who's boss\u003cbr\u003e ✓ SSL analogue channel processing for your audio workstation\u003cbr\u003e ✓ Pro mic preamp with line and instrument level switching\u003cbr\u003e ✓ Studio class EQ, Filter and Limiter sections\u003cbr\u003e ✓ Variable Harmonic Drive circuit - a time machine of distortion characteristics\u003cbr\u003e ✓ Analogue or digital outputs direct to your DAW\u003cbr\u003e\u003cbr\u003eAll great sounding recordings have to start somewhere...\u003cbr\u003eWith the classic combination of a mic preamp, filter, EQ and dynamics, the XLogic Alpha Channel brings SSL’s sonic legacy bang up to date in an analogue channel strip designed to provide the perfect front end to your digital audio workstation.\u003cbr\u003eWith all the features needed to record great vocal or instrument tracks, the Alpha Channel offers a studio class mic pre and processing based on SSL’s years of experience in designing the world’s leading analogue recording consoles. A huge proportion of the music you know and love was recorded on SSL, renowned for the superior audio qualities you’ve heard on countless hit records. That elusive sonic ingredient is here in the Alpha Channel.\u003cbr\u003e\u003cbr\u003eKey Features\u003cbr\u003e ✓ Professional ultra clean mic preamp with line level \u0026amp; Hi Z instrument input switches\u003cbr\u003e ✓ ‘Variable Harmonic Drive’ circuit; a Time Machine of distortion characteristics\u003cbr\u003e ✓ High Pass Filter with selectable 40Hz, 80Hz or 120Hz cutoff frequency\u003cbr\u003e ✓ Built in professional quality Analogue to Digital conversion - as standard\u003cbr\u003e ✓ Auto sample rate sensing and self adjustment\u003cbr\u003e ✓ Three band SSL parametric EQ with mid freq Q control and dual LF curves\u003cbr\u003e ✓ Intelligent auto compression that maximises recording headroom and avoids DAC clipping"}
Solid State Logic XLogic Alpha Channel

Solid State Logic XLogic Alpha Channel

$1,188.60

Analogue Hit MakerIt's time to show your DAW who's boss ✓ SSL analogue channel processing for your audio workstation ✓ Pro mic preamp with line and instrument level switching ✓ Studio class EQ, Filter and Limiter sections ✓ Variable Harmonic Drive circuit - a time machine of distortion characteristics ✓ Analogue or digital outputs direct to your...


More Info
{"id":98564177946,"title":"Solid State Logic X-Rack Mic Amp Module","handle":"solid-state-logic-x-rack-mic-amp-module","description":"X-Rack Mic Amp Module\u003cbr\u003eAngelically pure and versatile input section with a choice of three separate input amplifiers; Mic amp, front panel Instrument input or Line input. Designed for transparency and versatility with a set of High and Low Pass Filters, phase reverse and everything you need from a very classy workhorse.\u003cbr\u003e\u003cbr\u003eKey Features:\u003cbr\u003e ✓ Electronically balanced ultra high bandwidth input with -5dB to +75dB gain control \u0026amp; Pad switch\u003cbr\u003e ✓ Continuously Variable input impedance control (1.2kOhm to 10kOhm) can accommodate signals from instruments or be adjusted to suit a wide range of microphones\u003cbr\u003e ✓ Phase Reverse \u0026amp; Phantom Power\u003cbr\u003e ✓ Dedicated Additional XLR Line Input\u003cbr\u003e ✓ Front panel instrument input with ground lift switch\u003cbr\u003e ✓ Independently switched 12dB\/Octave HF (Low-Pass) Filter\u003cbr\u003e ✓ Independently switched 18dB\/Octave LF (High-Pass) Filter\u003cbr\u003e ✓ Independent routing to L \u0026amp; R Record bus","published_at":"2017-09-13T15:23:17+02:00","created_at":"2017-09-13T15:27:23+02:00","vendor":"Solid State Logic","type":"Mic Preamp","tags":["Preamps","Preamps \u0026 Channel Strips","Price Range_$750 to $1000","Shop by brand_Solid State Logic","Shop by category_Channel Strips","Shop by category_Preamps","Solid State Logic","Studio \u0026 Recording"],"price":89460,"price_min":89460,"price_max":89460,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1226543923226,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Solid State Logic X-Rack Mic Amp Module","public_title":null,"options":["Default Title"],"price":89460,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"729621X1"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/XR621.jpg?v=1528774542","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SSL-X-Rack_Mic-Pre-Module.jpg?v=1528774542","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SSL-X-Rack-configured-as-a-SuperAnalogue-processing-system_angle_b39d92d0-1a36-426b-8249-b8e516496e3e.jpg?v=1528774542"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/XR621.jpg?v=1528774542","options":["Title"],"content":"X-Rack Mic Amp Module\u003cbr\u003eAngelically pure and versatile input section with a choice of three separate input amplifiers; Mic amp, front panel Instrument input or Line input. Designed for transparency and versatility with a set of High and Low Pass Filters, phase reverse and everything you need from a very classy workhorse.\u003cbr\u003e\u003cbr\u003eKey Features:\u003cbr\u003e ✓ Electronically balanced ultra high bandwidth input with -5dB to +75dB gain control \u0026amp; Pad switch\u003cbr\u003e ✓ Continuously Variable input impedance control (1.2kOhm to 10kOhm) can accommodate signals from instruments or be adjusted to suit a wide range of microphones\u003cbr\u003e ✓ Phase Reverse \u0026amp; Phantom Power\u003cbr\u003e ✓ Dedicated Additional XLR Line Input\u003cbr\u003e ✓ Front panel instrument input with ground lift switch\u003cbr\u003e ✓ Independently switched 12dB\/Octave HF (Low-Pass) Filter\u003cbr\u003e ✓ Independently switched 18dB\/Octave LF (High-Pass) Filter\u003cbr\u003e ✓ Independent routing to L \u0026amp; R Record bus"}
Solid State Logic X-Rack Mic Amp Module

Solid State Logic X-Rack Mic Amp Module

$894.60

X-Rack Mic Amp ModuleAngelically pure and versatile input section with a choice of three separate input amplifiers; Mic amp, front panel Instrument input or Line input. Designed for transparency and versatility with a set of High and Low Pass Filters, phase reverse and everything you need from a very classy workhorse.Key Features: ✓ Electronical...


More Info