{"id":8593078157,"title":"Focal Sub 6 be (Single)","handle":"sub-6-be","description":"\u003cp\u003e\u003cstrong\u003eSub6\u003c\/strong\u003e\u003cbr\u003eThe Sub6 is a large volume cabinet design, equipped with an 11\" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L\/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Sub6 is an active subwoofer (1 x 350W RMS built-in amplifier - \u003cbr\u003eBASH technology) for professional monitoring systems. The driver is \u003cbr\u003ean 11\" Focal with a \"W\" sandwich composite cone loaded by a large \u003cbr\u003esection laminar port. It can be used both as LFE channel in a surround \u003cbr\u003esystem or as a bass or sub-bass complement in a stereo system (2.1 \u003cbr\u003eor 2.2). The Sub6 was designed to permit optimum acoustic coupling \u003cbr\u003ewith professional monitoring speakers. Therefore, it includes all the \u003cbr\u003efeatures to achieve this task, such as stereo high pass filter (75 or \u003cbr\u003e100Hz) for the left and right satellites, low pass filter (adjustable) \u003cbr\u003ewith mono summation, phase inverter, phase fine tuning, mute \u003cbr\u003eswitch, 2.1 bypass with a footswitch remote control (not included), as \u003cbr\u003ewell as a wiring panel rich in possibilities\u003cbr\u003e\u003cbr\u003eThe “W” cone\u003cbr\u003e\u003cbr\u003eFocal has been developing the technologies of composite sandwich \u003cbr\u003econes for more than 15 years. The \"W\" process (Glass\/Foam\/Glass), \u003cbr\u003eused on the SM11, SM8 and SM6 lines, provides a true optimiza-\u003cbr\u003ea true optimization of the frequency response by fine tuning of mass, rigidity and \u003cbr\u003edamping parameters.The balance between these 3 fundamental \u003cbr\u003eand often contradictory parameters is at the base of the outstanding \u003cbr\u003esound neutrality of our speakers. \u003cbr\u003eThe 10 5\/8\"(27cm) Focal speaker is equipped with a high excursion \u003cbr\u003esystem to enable accurate and extended reproduction in the bass\/\u003cbr\u003einfra bass register. The 2 5\/8\" (66mm) diameter and 1 1\/4\" (32mm) \u003cbr\u003eheight voice coil ensures a perfect mechanical coupling and a \u003cbr\u003etotal control of the driver even at high sound level. The magnetic \u003cbr\u003econstruction made of double ferrite and large field and back plates \u003cbr\u003eoffers high symmetrical magnetic field to keep dynamics even at \u003cbr\u003every low frequency. \u003cbr\u003e\u003cbr\u003eA custom designed amplification stage\u003cbr\u003e\u003cbr\u003eDesigning an amp to be integrated inside a speaker requires a very \u003cbr\u003edifferent set of rules than for a traditional amp. Speaker size and \u003cbr\u003ecooling concerns are often in contradiction with the high quality and \u003cbr\u003ehigh power requirements of a sonically transparent speaker.\u003cbr\u003eOur engineers used the BASH® technology to develop the bass\/me\u003cbr\u003edium amplification circuit for the SM6 professional line of speakers. \u003cbr\u003eThis was the only way to exploit the best of class AB style circuits \u003cbr\u003e(for exceptional quality) with a class D type yield, which is crucial \u003cbr\u003ewhen housing a 150W RMS circuit in such a small space (300W RMS \u003cbr\u003efor the Twin6 Be and 350W RMS for the Sub6).\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2016-12-12T20:48:00+02:00","created_at":"2016-12-12T20:49:35+02:00","vendor":"Focal","type":"Studio Monitors","tags":["Focal","Price Range_$1500 to $2000","Shop by brand_Focal","Shop by category_Studio Monitors","Shop by category_Subwoofers","Studio \u0026 Recording","Studio Monitors","Subwoofers"],"price":163900,"price_min":163900,"price_max":163900,"available":true,"price_varies":false,"compare_at_price":189900,"compare_at_price_min":189900,"compare_at_price_max":189900,"compare_at_price_varies":false,"variants":[{"id":29403533965,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PL06SUB01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Focal Sub 6 be (Single)","public_title":null,"options":["Default Title"],"price":163900,"weight":30420,"compare_at_price":189900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"3544052801200"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_2acc2eba-3259-4127-a321-994e031776db.jpg?v=1500495169","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_855eaa76-f06d-4553-a28b-16fd231befda.jpg?v=1500495169","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_d7d58c65-c210-4644-9df3-4b29cb835de8.jpg?v=1500495169","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_eb99ca77-8191-4351-a6f7-920f69e2bef1.jpg?v=1500495169","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_acfdf027-761b-4ee5-83fb-767dd725b270.jpg?v=1500495169","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_bf412067-b96f-4624-8f85-524750c3dd72.jpg?v=1500495169"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/sub6_2acc2eba-3259-4127-a321-994e031776db.jpg?v=1500495169","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eSub6\u003c\/strong\u003e\u003cbr\u003eThe Sub6 is a large volume cabinet design, equipped with an 11\" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L\/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Sub6 is an active subwoofer (1 x 350W RMS built-in amplifier - \u003cbr\u003eBASH technology) for professional monitoring systems. The driver is \u003cbr\u003ean 11\" Focal with a \"W\" sandwich composite cone loaded by a large \u003cbr\u003esection laminar port. It can be used both as LFE channel in a surround \u003cbr\u003esystem or as a bass or sub-bass complement in a stereo system (2.1 \u003cbr\u003eor 2.2). The Sub6 was designed to permit optimum acoustic coupling \u003cbr\u003ewith professional monitoring speakers. Therefore, it includes all the \u003cbr\u003efeatures to achieve this task, such as stereo high pass filter (75 or \u003cbr\u003e100Hz) for the left and right satellites, low pass filter (adjustable) \u003cbr\u003ewith mono summation, phase inverter, phase fine tuning, mute \u003cbr\u003eswitch, 2.1 bypass with a footswitch remote control (not included), as \u003cbr\u003ewell as a wiring panel rich in possibilities\u003cbr\u003e\u003cbr\u003eThe “W” cone\u003cbr\u003e\u003cbr\u003eFocal has been developing the technologies of composite sandwich \u003cbr\u003econes for more than 15 years. The \"W\" process (Glass\/Foam\/Glass), \u003cbr\u003eused on the SM11, SM8 and SM6 lines, provides a true optimiza-\u003cbr\u003ea true optimization of the frequency response by fine tuning of mass, rigidity and \u003cbr\u003edamping parameters.The balance between these 3 fundamental \u003cbr\u003eand often contradictory parameters is at the base of the outstanding \u003cbr\u003esound neutrality of our speakers. \u003cbr\u003eThe 10 5\/8\"(27cm) Focal speaker is equipped with a high excursion \u003cbr\u003esystem to enable accurate and extended reproduction in the bass\/\u003cbr\u003einfra bass register. The 2 5\/8\" (66mm) diameter and 1 1\/4\" (32mm) \u003cbr\u003eheight voice coil ensures a perfect mechanical coupling and a \u003cbr\u003etotal control of the driver even at high sound level. The magnetic \u003cbr\u003econstruction made of double ferrite and large field and back plates \u003cbr\u003eoffers high symmetrical magnetic field to keep dynamics even at \u003cbr\u003every low frequency. \u003cbr\u003e\u003cbr\u003eA custom designed amplification stage\u003cbr\u003e\u003cbr\u003eDesigning an amp to be integrated inside a speaker requires a very \u003cbr\u003edifferent set of rules than for a traditional amp. Speaker size and \u003cbr\u003ecooling concerns are often in contradiction with the high quality and \u003cbr\u003ehigh power requirements of a sonically transparent speaker.\u003cbr\u003eOur engineers used the BASH® technology to develop the bass\/me\u003cbr\u003edium amplification circuit for the SM6 professional line of speakers. \u003cbr\u003eThis was the only way to exploit the best of class AB style circuits \u003cbr\u003e(for exceptional quality) with a class D type yield, which is crucial \u003cbr\u003ewhen housing a 150W RMS circuit in such a small space (300W RMS \u003cbr\u003efor the Twin6 Be and 350W RMS for the Sub6).\u003c\/strong\u003e\u003c\/p\u003e"}

Focal Sub 6 be (Single)

Product Description
$1,639.00 $1,899.00
Maximum quantity available reached.

Sub6
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

The Sub6 is an active subwoofer (1 x 350W RMS built-in amplifier -
BASH technology) for professional monitoring systems. The driver is
an 11" Focal with a "W" sandwich composite cone loaded by a large
section laminar port. It can be used both as LFE channel in a surround
system or as a bass or sub-bass complement in a stereo system (2.1
or 2.2). The Sub6 was designed to permit optimum acoustic coupling
with professional monitoring speakers. Therefore, it includes all the
features to achieve this task, such as stereo high pass filter (75 or
100Hz) for the left and right satellites, low pass filter (adjustable)
with mono summation, phase inverter, phase fine tuning, mute
switch, 2.1 bypass with a footswitch remote control (not included), as
well as a wiring panel rich in possibilities

The “W” cone

Focal has been developing the technologies of composite sandwich
cones for more than 15 years. The "W" process (Glass/Foam/Glass),
used on the SM11, SM8 and SM6 lines, provides a true optimiza-
a true optimization of the frequency response by fine tuning of mass, rigidity and
damping parameters.The balance between these 3 fundamental
and often contradictory parameters is at the base of the outstanding
sound neutrality of our speakers.
The 10 5/8"(27cm) Focal speaker is equipped with a high excursion
system to enable accurate and extended reproduction in the bass/
infra bass register. The 2 5/8" (66mm) diameter and 1 1/4" (32mm)
height voice coil ensures a perfect mechanical coupling and a
total control of the driver even at high sound level. The magnetic
construction made of double ferrite and large field and back plates
offers high symmetrical magnetic field to keep dynamics even at
very low frequency.

A custom designed amplification stage

Designing an amp to be integrated inside a speaker requires a very
different set of rules than for a traditional amp. Speaker size and
cooling concerns are often in contradiction with the high quality and
high power requirements of a sonically transparent speaker.
Our engineers used the BASH® technology to develop the bass/me
dium amplification circuit for the SM6 professional line of speakers.
This was the only way to exploit the best of class AB style circuits
(for exceptional quality) with a class D type yield, which is crucial
when housing a 150W RMS circuit in such a small space (300W RMS
for the Twin6 Be and 350W RMS for the Sub6).

Sku: PL06SUB01
Vendor: Focal

Related Products