Adam Audio Sub10 MK2

The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).

Features & Benefits

• Linear bass reproduction down to 25 Hz    
• Ideal addition to nearfield and midfield monitors
• Maximum Peak sound pressure in 1 m ≥ 113 dB    
• Powerful, compression-free sound reproduction even at very high sound levels
• High efficiency PWM amplifier    
• Low-distortion amplification at both low and high volume levels
• Special 10" woofer with paper diaphragm    
• Unrestricted bass reproduction for low-fatigue operation even at high volumes
• Easy manual or automatic (de-)activation    
• If desired, monitoring is possible without the low frequencies
• According to downward working bass reflex tube with generous dimensions and corresponding rounding    
• Prevention of air turbulence noise
• Upper cut-off frequency is selectable between 50 - 150 Hz    
• Allows optimal adaptation of the total system on the bass performance of the satellites
• Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz    
• Dolby®- Fair reproduction of film sound
• Discharging the satellites from the low frequencies

Technical Data

• Subwoofer
• Number    1
• Basket Ø    10" (260 mm)
• Voice Coil Ø    2" (50 mm)
• Cone Material    Paper
• Built-in Amplifiers
• Subwoofer    1
• Type    PWM
• Amp. Power RMS / Music    200 W / 300 W
• Input Connectors
• Analog    XLR / RCA
• General Data
• Frequency Response    25 Hz - 150 Hz
• THD > 60 Hz    ≤1 %
• Max. peak SPL at 1 m    ≥113 dB
• Crossover Frequencies    50 - 150 Hz
• Input Impedance    10 kOhm
• Panel    Rear
• Weight    46.3 lb (21 kg)
• Height x Width x Depth    22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
• Warranty    5 years (2 years warranty plus 3 years optional with product registration)
• Delivery Contents    Power cord, manual