Synthesizers

Sort by:
{"id":658135187502,"title":"Moog DFAM (Drummer From Another Mother)","handle":"moog-dfam-drummer-from-another-mother","description":"\u003cp\u003eDFAM (Drummer From Another Mother)\u003c\/p\u003e\n\u003cp\u003eDFAM is the first addition to the Mother ecosystem of synthesizers and presents an expressive hands-on approach to percussive pattern creation. It requires no patching, and absolutely no experience is needed for human-beings of any age to quickly begin synthesizing new and unique rhythmic compositions.\u003c\/p\u003e\n\u003cp\u003eActivated by an easy-to-use analog sequencer, DFAM’s emotive sound begins with a white noise generator and two wide-range analog oscillators - effortlessly transitioning between rhythmic pulsations, resounding bass and resonant bells in an instant. DFAM’s distinctive voice is then shaped by a classic Moog Ladder filter with two selectable modes: Low Pass mode imparts impact and dimension to each sound it touches, while High Pass mode opens the door to naturally expressive strikes, spikes and clangorous accentuations.\u003c\/p\u003e\n\u003cp\u003eDFAM behaves much like a living organism, reacting in different ways to different individuals. 3 dedicated analog envelopes work dynamically with the sequencer to ensure that tribal toms breathe, industrial impacts evolve, and sonic chaos can be created or subdued at the turn of a knob.\u003c\/p\u003e\n\u003cp\u003eEach DFAM ships with a package of Moog patch cables that unlock access to the 24-point modular patchbay. Use it to create new sounds or bizarre behaviors, synchronize an unlimited number of DFAM and Mother-32 units together, or fully integrate your analog instrument into a modular Eurorack production environment.\u003c\/p\u003e\n\u003cp\u003eThrough exploration and experimentation, the vast potential of this expressive analog instrument is realized.\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSOUND ENGINE: Analog\u003c\/li\u003e\n\u003cli\u003eANALOG SEQUENCER: 8-Steps With Pitch and Velocity Per-Step\u003c\/li\u003e\n\u003cli\u003eSEQUENCER PANEL CONTROLS: Tempo, Run\/Stop, Trigger, Advance\u003c\/li\u003e\n\u003cli\u003eSOUND SOURCES: 2 Oscillators With Square and Triangle Waveforms, 1 White Noise Generator, 1 External Audio Input\u003c\/li\u003e\n\u003cli\u003eFREQUENCY CONTROL: +\/- 5 Octaves (10 Octave Range)\u003c\/li\u003e\n\u003cli\u003eMIXER: Level controls for Oscillator 1, Oscillator 2 and White Noise\/External Audio Input\u003c\/li\u003e\n\u003cli\u003eFILTER: 20Hz-20KHz Switchable Low Pass \/ High Pass 4-Pole Transistor Ladder Filter\u003c\/li\u003e\n\u003cli\u003eENVELOPES: VCO EG w\/ Voltage Controlled Decay and Bipolar Amount Control, VCF EG w\/ Voltage Controlled Decay and Bipolar Amount Control, VCA EG w\/ Voltage Controlled Decay and Selectable Fast\/Slow Attack Time\u003c\/li\u003e\n\u003cli\u003ePATCHBAY: 24x 3.5mm Jacks\u003c\/li\u003e\n\u003cli\u003ePATCHBAY INPUTS: Trigger, VCA CV, Velocity, VCA Decay, External Audio, VCF Decay, Noise Level, VCO Decay, VCF Mod, VCO 1 CV, 1\u003cspan\u003e→\u003c\/span\u003e2 FM Amount, VCO 2 CV, Tempo, Run\/Stop, Advance\/Clock.\u003c\/li\u003e\n\u003cli\u003ePATCHBAY OUTPUTS: VCA, VCA EG, VCF EG, VCO EG, VCO 1, VCO 2, Trigger, Velocity, Pitch.\u003c\/li\u003e\n\u003cli\u003eAUDIO OUTPUT: ¼” TS Line \/ ¼” TRS Headphones (Shared Output Jack)\u003c\/li\u003e\n\u003cli\u003eINCLUDED POWER SUPPLY: 100-240VAC; 50-60Hz, +12VDC 1200mA\u003c\/li\u003e\n\u003cli\u003ePOWER CONSUMPTION: 3.0W\u003c\/li\u003e\n\u003cli\u003eEURORACK CURRENT DRAW: 230mA (+12V – from 10-pin header)\u003c\/li\u003e\n\u003cli\u003eEURORACK MOUNTING DIMENSIONS: 60HP (1”\/26mm Module Depth)\u003c\/li\u003e\n\u003cli\u003eWEIGHT: 3.5lbs\u003c\/li\u003e\n\u003cli\u003eDIMENSIONS: 12.57”W x 4.21“H (with knobs) x 5.24“D\u003c\/li\u003e\n\u003cli\u003eSpecifications Subject To Change Without Notice\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-05-01T04:53:58+02:00","created_at":"2018-05-01T05:01:14+02:00","vendor":"Moog","type":"Synthesizers","tags":["Eurorack \u0026 Modular Synthesizers","Keyboards \u0026 Synthesizers","Modular Synthesizers","Moog","Price Range_$500 to $750","Shop by brand_Moog","Shop by category_Eurorack \u0026 Modular Synthesizers","Shop by category_Keyboards \u0026 Synthesizers","Shop by category_Modular Synthesizers","Synthesizers"],"price":67900,"price_min":67900,"price_max":67900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7715260170286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-DFAM-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog DFAM (Drummer From Another Mother)","public_title":null,"options":["Default Title"],"price":67900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232613227"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/DFAM-angle_WEB.jpg?v=1525143704","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/DFAM.jpg?v=1525143728","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Mother_32_back_black.jpg?v=1525143737","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/DFAM-patched.jpg?v=1525143747"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/DFAM-angle_WEB.jpg?v=1525143704","options":["Title"],"content":"\u003cp\u003eDFAM (Drummer From Another Mother)\u003c\/p\u003e\n\u003cp\u003eDFAM is the first addition to the Mother ecosystem of synthesizers and presents an expressive hands-on approach to percussive pattern creation. It requires no patching, and absolutely no experience is needed for human-beings of any age to quickly begin synthesizing new and unique rhythmic compositions.\u003c\/p\u003e\n\u003cp\u003eActivated by an easy-to-use analog sequencer, DFAM’s emotive sound begins with a white noise generator and two wide-range analog oscillators - effortlessly transitioning between rhythmic pulsations, resounding bass and resonant bells in an instant. DFAM’s distinctive voice is then shaped by a classic Moog Ladder filter with two selectable modes: Low Pass mode imparts impact and dimension to each sound it touches, while High Pass mode opens the door to naturally expressive strikes, spikes and clangorous accentuations.\u003c\/p\u003e\n\u003cp\u003eDFAM behaves much like a living organism, reacting in different ways to different individuals. 3 dedicated analog envelopes work dynamically with the sequencer to ensure that tribal toms breathe, industrial impacts evolve, and sonic chaos can be created or subdued at the turn of a knob.\u003c\/p\u003e\n\u003cp\u003eEach DFAM ships with a package of Moog patch cables that unlock access to the 24-point modular patchbay. Use it to create new sounds or bizarre behaviors, synchronize an unlimited number of DFAM and Mother-32 units together, or fully integrate your analog instrument into a modular Eurorack production environment.\u003c\/p\u003e\n\u003cp\u003eThrough exploration and experimentation, the vast potential of this expressive analog instrument is realized.\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSOUND ENGINE: Analog\u003c\/li\u003e\n\u003cli\u003eANALOG SEQUENCER: 8-Steps With Pitch and Velocity Per-Step\u003c\/li\u003e\n\u003cli\u003eSEQUENCER PANEL CONTROLS: Tempo, Run\/Stop, Trigger, Advance\u003c\/li\u003e\n\u003cli\u003eSOUND SOURCES: 2 Oscillators With Square and Triangle Waveforms, 1 White Noise Generator, 1 External Audio Input\u003c\/li\u003e\n\u003cli\u003eFREQUENCY CONTROL: +\/- 5 Octaves (10 Octave Range)\u003c\/li\u003e\n\u003cli\u003eMIXER: Level controls for Oscillator 1, Oscillator 2 and White Noise\/External Audio Input\u003c\/li\u003e\n\u003cli\u003eFILTER: 20Hz-20KHz Switchable Low Pass \/ High Pass 4-Pole Transistor Ladder Filter\u003c\/li\u003e\n\u003cli\u003eENVELOPES: VCO EG w\/ Voltage Controlled Decay and Bipolar Amount Control, VCF EG w\/ Voltage Controlled Decay and Bipolar Amount Control, VCA EG w\/ Voltage Controlled Decay and Selectable Fast\/Slow Attack Time\u003c\/li\u003e\n\u003cli\u003ePATCHBAY: 24x 3.5mm Jacks\u003c\/li\u003e\n\u003cli\u003ePATCHBAY INPUTS: Trigger, VCA CV, Velocity, VCA Decay, External Audio, VCF Decay, Noise Level, VCO Decay, VCF Mod, VCO 1 CV, 1\u003cspan\u003e→\u003c\/span\u003e2 FM Amount, VCO 2 CV, Tempo, Run\/Stop, Advance\/Clock.\u003c\/li\u003e\n\u003cli\u003ePATCHBAY OUTPUTS: VCA, VCA EG, VCF EG, VCO EG, VCO 1, VCO 2, Trigger, Velocity, Pitch.\u003c\/li\u003e\n\u003cli\u003eAUDIO OUTPUT: ¼” TS Line \/ ¼” TRS Headphones (Shared Output Jack)\u003c\/li\u003e\n\u003cli\u003eINCLUDED POWER SUPPLY: 100-240VAC; 50-60Hz, +12VDC 1200mA\u003c\/li\u003e\n\u003cli\u003ePOWER CONSUMPTION: 3.0W\u003c\/li\u003e\n\u003cli\u003eEURORACK CURRENT DRAW: 230mA (+12V – from 10-pin header)\u003c\/li\u003e\n\u003cli\u003eEURORACK MOUNTING DIMENSIONS: 60HP (1”\/26mm Module Depth)\u003c\/li\u003e\n\u003cli\u003eWEIGHT: 3.5lbs\u003c\/li\u003e\n\u003cli\u003eDIMENSIONS: 12.57”W x 4.21“H (with knobs) x 5.24“D\u003c\/li\u003e\n\u003cli\u003eSpecifications Subject To Change Without Notice\u003c\/li\u003e\n\u003c\/ul\u003e"}
Moog DFAM (Drummer From Another Mother)

Moog DFAM (Drummer From Another Mother)

$679.00

DFAM (Drummer From Another Mother) DFAM is the first addition to the Mother ecosystem of synthesizers and presents an expressive hands-on approach to percussive pattern creation. It requires no patching, and absolutely no experience is needed for human-beings of any age to quickly begin synthesizing new and unique rhythmic compositions. Activate...


More Info
Moog Sequencer Complement A/B (Portable)

Synthesizers

From $5,950.00
{"id":658124079150,"title":"Moog Sequencer Complement A\/B (Portable)","handle":"moog-sequencer-complement-a-b-portable","description":"\u003cp\u003eSequencer Complement A\/B (Portable)\u003c\/p\u003e\n\u003cp\u003eINFO\u003c\/p\u003e\n\u003cp\u003eThe Moog Sequencer Complement A \u0026amp; B portable expansion cabinets are powerful additions to any newly released portable Moog Modular synthesizer. Each Complement provides rhythmic accompaniment and extended synthesis capabilities for increased inspiration and sonic potential. Housed in a rugged wood and black tolex-wrapped cabinet, these portable Sequencer Complements are ideal companions for the Moog Model 15 or Synthesizer IIIp modular synthesizers.\u003c\/p\u003e\n\u003cp\u003eAll Sequencer Complement A \u0026amp; B portable expansion cabinets are hand-built to their original 1974 Moog factory specifications and are true recreations of the originals. Individual modules are brought to life just as the originals were, by hand-stuffing and hand-soldering components to circuit boards, and using traditional wiring methods. Each module is then finished with a photo-etched aluminum panel, and placed in its new modular cabinet.\u003c\/p\u003e\n\u003cp\u003eThese limited reissues of the Moog Sequencer Complement A \u0026amp; B portable expansion cabinets are built to order, and available in limited quantities while parts remain.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: The Sequencer Complement A \u0026amp; B cabinets are powered by direct connection to compatible Moog Modular Synthesizers only.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003eSequencer Complement A Modules\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 960 Sequential Controller\u003c\/li\u003e\n\u003cli\u003e1x 961 Interface\u003c\/li\u003e\n\u003cli\u003e1x 962 Sequential Switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSequencer Complement B Modules\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x 960 Sequential Controllers\u003c\/li\u003e\n\u003cli\u003e1x 961 Interface\u003c\/li\u003e\n\u003cli\u003e2x 962 Sequential Switch\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-05-01T04:29:07+02:00","created_at":"2018-05-01T04:38:06+02:00","vendor":"Moog","type":"Synthesizers","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$3000 and Over","Shop by brand_Moog","Shop by category_ Keyboards \u0026 Synthesizers","Shop by category_ Synthesizers","Synthesizers"],"price":595000,"price_min":595000,"price_max":975000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7715247652910,"title":"A","option1":"A","option2":null,"option3":null,"sku":"MOD-SEQ-AP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Sequencer Complement A\/B (Portable) - A","public_title":"A","options":["A"],"price":595000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232613234"},{"id":7715247685678,"title":"B","option1":"B","option2":null,"option3":null,"sku":"MOD-SEQ-BP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Sequencer Complement A\/B (Portable) - B","public_title":"B","options":["B"],"price":975000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"040232613241"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sequencer_comp_b_portable.jpg?v=1525142303","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/COMP_A_PORT.jpg?v=1525142318"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sequencer_comp_b_portable.jpg?v=1525142303","options":["Model"],"content":"\u003cp\u003eSequencer Complement A\/B (Portable)\u003c\/p\u003e\n\u003cp\u003eINFO\u003c\/p\u003e\n\u003cp\u003eThe Moog Sequencer Complement A \u0026amp; B portable expansion cabinets are powerful additions to any newly released portable Moog Modular synthesizer. Each Complement provides rhythmic accompaniment and extended synthesis capabilities for increased inspiration and sonic potential. Housed in a rugged wood and black tolex-wrapped cabinet, these portable Sequencer Complements are ideal companions for the Moog Model 15 or Synthesizer IIIp modular synthesizers.\u003c\/p\u003e\n\u003cp\u003eAll Sequencer Complement A \u0026amp; B portable expansion cabinets are hand-built to their original 1974 Moog factory specifications and are true recreations of the originals. Individual modules are brought to life just as the originals were, by hand-stuffing and hand-soldering components to circuit boards, and using traditional wiring methods. Each module is then finished with a photo-etched aluminum panel, and placed in its new modular cabinet.\u003c\/p\u003e\n\u003cp\u003eThese limited reissues of the Moog Sequencer Complement A \u0026amp; B portable expansion cabinets are built to order, and available in limited quantities while parts remain.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: The Sequencer Complement A \u0026amp; B cabinets are powered by direct connection to compatible Moog Modular Synthesizers only.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003eSequencer Complement A Modules\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 960 Sequential Controller\u003c\/li\u003e\n\u003cli\u003e1x 961 Interface\u003c\/li\u003e\n\u003cli\u003e1x 962 Sequential Switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSequencer Complement B Modules\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x 960 Sequential Controllers\u003c\/li\u003e\n\u003cli\u003e1x 961 Interface\u003c\/li\u003e\n\u003cli\u003e2x 962 Sequential Switch\u003c\/li\u003e\n\u003c\/ul\u003e"}
Moog Sequencer Complement A/B (Portable)

Moog Sequencer Complement A/B (Portable)

$5,950.00

Sequencer Complement A/B (Portable) INFO The Moog Sequencer Complement A & B portable expansion cabinets are powerful additions to any newly released portable Moog Modular synthesizer. Each Complement provides rhythmic accompaniment and extended synthesis capabilities for increased inspiration and sonic potential. Housed in a rugged wood and...

Model

More Info
Moog Synthesizer IIIp

Synthesizers

$35,000.00
{"id":658117492782,"title":"Moog Synthesizer IIIp","handle":"moog-synthesizer-iiip","description":"\u003cp\u003eSynthesizer IIIp\u003c\/p\u003e\n\u003cp\u003eINFO\u003c\/p\u003e\n\u003cp\u003eThe Synthesizer Concept\u003c\/p\u003e\n\u003cp\u003eThroughout the 1960s, Dr. Robert Moog collaborated with over 100 composers of electroacoustic music to create the synthesizer concept, born of thousands of design decisions and countless conversations. At the time, the available method of producing electronic music was the “classical studio,” a makeshift production environment cobbled together from individual electronic sound-generators such as surplus telecommunications devices, radio equipment, and early tape machines. Moog and the musicians he worked with streamlined this classical studio technique into a system of standardized sound modules.\u003c\/p\u003e\n\u003cp\u003eIn 1965, Bob Moog began taking orders for individual modules and customized modular systems. By 1967, he and a team of ten skilled technicians were hand-building production models in an unassuming brick storefront in Trumansburg, NY. The cutting-edge musical instruments that they called “synthesizers” signaled electronic music’s maturation from an awkward and shy intruder in the realm of music to a dynamic and significant medium of musical expression.\u003c\/p\u003e\n\u003cp\u003eThe first models were aptly named Synthesizer I, II, and III. With the introduction of the Moog Synthesizer IIIc -- the “c” referring to the walnut “console” cabinet -- musicians could purchase a complete instrument pre-configured for logical access to a range of facilities usually associated with the largest classical studios. This was followed by the availability of the Moog Synthesizer IIIp - a fully portable 3-cabinet iteration of the venerable Moog Synthesizer IIIc.\u003c\/p\u003e\n\u003cp\u003eEach synthesizer took weeks of patient, steady crafting to complete, but the payoff would be rich -- a tool that would change the landscape of music.\u003c\/p\u003e\n\u003cp\u003eThe world got turned on to the idea of the synthesizer -- and electronic music -- through the visionary works of experimental musicians like Wendy Carlos and Isao Tomita. Sonic masterpieces like Switched On Bach and Snowflakes Are Dancing were made possible by the early modular Moog Synthesizers. These original modular systems designed by Bob Moog are inimitable in sonic character and remain highly coveted for their limitless reconfigurability and vibrantly organic musicality.\u003c\/p\u003e\n\u003cp\u003eFifty years later, we are proud to announce the return of the Moog Synthesizer IIIp to production for a very limited time.\u003c\/p\u003e\n\u003cp\u003eEvery Synthesizer IIIp will be built using all-original documentation, art, and circuit board files. Each instrument features thirty-seven hand-stuffed, hand-soldered modules, including ten 901-Series audio oscillators, the 984 Matrix Mixer, and the 905 Spring Reverb. All modules are securely mounted into three solid wood, tolex-wrapped cabinets at the Moog Factory in Asheville, NC.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMoog Synthesizer IIIp production is highly limited. Only 40 units will be produced and sold worldwide.\u003c\/p\u003e\n\u003cp\u003eSynthesizer IIIp is available through select Moog Dealers:\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSweetwater\u003c\/p\u003e\n\u003cp\u003eVintage King Audio\u003c\/p\u003e\n\u003cp\u003eNoise Bug\u003c\/p\u003e\n\u003cp\u003eSwitched On\u003c\/p\u003e\n\u003cp\u003eThree Wave Music\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003e• Entire system recreated using original documentation, circuit board and art files and traditional manufacturing techniques.\u003c\/p\u003e\n\u003cp\u003e• 37 hand-stuffed, hand-soldered modules custom mounted and hand-wired in three solid wood, tolex-wrapped cabinets.\u003c\/p\u003e\n\u003cp\u003e• 10x discrete 901 series oscillators (Coveted for their organic sound. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 905 Spring Reverb module (Expands the character of any sound into enchanting, piano-like trails. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 4x CP3 mixers (These are tonally similar to the mixer found in the Model 15. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 984 4-channel Matrix Mixer (Designed for parallel processing, complete with dedicated controls for Bass and Treble. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 100% discrete design (There are absolutely no op-amps. Not the case in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• Only 40 Moog Synthesizer IIIp will be handcrafted and sold worldwide\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTE: A new Synthesizer IIIp is built exactly as the originals. It also behaves exactly as the originals, which means tuning instability and susceptibility to interference is inherent to the design.\u003c\/p\u003e\n\u003cp\u003eSYNTHESIZER IIIp MODULES\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 901 Voltage Controlled Oscillator\u003c\/li\u003e\n\u003cli\u003e3x 901A Oscillator Controllers\u003c\/li\u003e\n\u003cli\u003e9x 901B Oscillators\u003c\/li\u003e\n\u003cli\u003e3x 902 Voltage Controlled Amplifiers\u003c\/li\u003e\n\u003cli\u003e1x 903A Random Signal Generator\u003c\/li\u003e\n\u003cli\u003e1x 904A Voltage Controlled Lowpass Filter\u003c\/li\u003e\n\u003cli\u003e1x 904B Voltage Controlled Highpass Filter\u003c\/li\u003e\n\u003cli\u003e1x 904C Filter Coupler\u003c\/li\u003e\n\u003cli\u003e1x 905 Reverberation Unit\u003c\/li\u003e\n\u003cli\u003e3x 911 Envelope Generators\u003c\/li\u003e\n\u003cli\u003e1x 911A Dual Trigger Delay\u003c\/li\u003e\n\u003cli\u003e1x 912 Envelope Follower\u003c\/li\u003e\n\u003cli\u003e1x 914 Extended Range Fixed Filter Bank\u003c\/li\u003e\n\u003cli\u003e1x 984 Four Channel Mixer\u003c\/li\u003e\n\u003cli\u003e1x 991 Lowpass and Highpass Filter with Attenuator\u003c\/li\u003e\n\u003cli\u003e1x 992 Control Voltage\/Attenuator Panel\u003c\/li\u003e\n\u003cli\u003e1x 993 Trigger \u0026amp; Envelope Voltages Panel\u003c\/li\u003e\n\u003cli\u003e1x 994 Multiples Panel\u003c\/li\u003e\n\u003cli\u003e4x Console Panel No. 3, each including:\u003c\/li\u003e\n\u003cli\u003e- 4-input mixer with + and – outputs\u003c\/li\u003e\n\u003cli\u003e- 2 Trunklines\u003c\/li\u003e\n\u003cli\u003e- Control Voltage Switches\u003c\/li\u003e\n\u003cli\u003e- Master Volume\u003c\/li\u003e\n\u003cli\u003e- Click Filter\u003c\/li\u003e\n\u003cli\u003e1x Console Panel No. 1 including:\u003c\/li\u003e\n\u003cli\u003e- 3 Control Voltage and Trigger Outputs\u003c\/li\u003e\n\u003cli\u003e1x Console Panel No. 9 including\u003c\/li\u003e\n\u003cli\u003e- Power Switch\u003c\/li\u003e\n\u003cli\u003e- Pilot Lamp\u003c\/li\u003e\n\u003cli\u003e- Fuse Holders\u003c\/li\u003e\n\u003cli\u003e1x 350 Watt 120 VAC or 230 VAC Switch Selectable Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-05-01T04:10:19+02:00","created_at":"2018-05-01T04:25:47+02:00","vendor":"Moog","type":"Synthesizers","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$3000 and Over","Shop by brand_Moog","Shop by category_ Keyboards \u0026 Synthesizers","Shop by category_ Synthesizers","Synthesizers"],"price":3500000,"price_min":3500000,"price_max":3500000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7715238117422,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-SYS-3P-xx","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Synthesizer IIIp","public_title":null,"options":["Default Title"],"price":3500000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/IIIP_Moog.jpg?v=1525141593","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Cab_1_Web.jpg?v=1525141607","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Cab_2_Web.jpg?v=1525141615","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Cab_3_Web.jpg?v=1525141624"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/IIIP_Moog.jpg?v=1525141593","options":["Title"],"content":"\u003cp\u003eSynthesizer IIIp\u003c\/p\u003e\n\u003cp\u003eINFO\u003c\/p\u003e\n\u003cp\u003eThe Synthesizer Concept\u003c\/p\u003e\n\u003cp\u003eThroughout the 1960s, Dr. Robert Moog collaborated with over 100 composers of electroacoustic music to create the synthesizer concept, born of thousands of design decisions and countless conversations. At the time, the available method of producing electronic music was the “classical studio,” a makeshift production environment cobbled together from individual electronic sound-generators such as surplus telecommunications devices, radio equipment, and early tape machines. Moog and the musicians he worked with streamlined this classical studio technique into a system of standardized sound modules.\u003c\/p\u003e\n\u003cp\u003eIn 1965, Bob Moog began taking orders for individual modules and customized modular systems. By 1967, he and a team of ten skilled technicians were hand-building production models in an unassuming brick storefront in Trumansburg, NY. The cutting-edge musical instruments that they called “synthesizers” signaled electronic music’s maturation from an awkward and shy intruder in the realm of music to a dynamic and significant medium of musical expression.\u003c\/p\u003e\n\u003cp\u003eThe first models were aptly named Synthesizer I, II, and III. With the introduction of the Moog Synthesizer IIIc -- the “c” referring to the walnut “console” cabinet -- musicians could purchase a complete instrument pre-configured for logical access to a range of facilities usually associated with the largest classical studios. This was followed by the availability of the Moog Synthesizer IIIp - a fully portable 3-cabinet iteration of the venerable Moog Synthesizer IIIc.\u003c\/p\u003e\n\u003cp\u003eEach synthesizer took weeks of patient, steady crafting to complete, but the payoff would be rich -- a tool that would change the landscape of music.\u003c\/p\u003e\n\u003cp\u003eThe world got turned on to the idea of the synthesizer -- and electronic music -- through the visionary works of experimental musicians like Wendy Carlos and Isao Tomita. Sonic masterpieces like Switched On Bach and Snowflakes Are Dancing were made possible by the early modular Moog Synthesizers. These original modular systems designed by Bob Moog are inimitable in sonic character and remain highly coveted for their limitless reconfigurability and vibrantly organic musicality.\u003c\/p\u003e\n\u003cp\u003eFifty years later, we are proud to announce the return of the Moog Synthesizer IIIp to production for a very limited time.\u003c\/p\u003e\n\u003cp\u003eEvery Synthesizer IIIp will be built using all-original documentation, art, and circuit board files. Each instrument features thirty-seven hand-stuffed, hand-soldered modules, including ten 901-Series audio oscillators, the 984 Matrix Mixer, and the 905 Spring Reverb. All modules are securely mounted into three solid wood, tolex-wrapped cabinets at the Moog Factory in Asheville, NC.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMoog Synthesizer IIIp production is highly limited. Only 40 units will be produced and sold worldwide.\u003c\/p\u003e\n\u003cp\u003eSynthesizer IIIp is available through select Moog Dealers:\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSweetwater\u003c\/p\u003e\n\u003cp\u003eVintage King Audio\u003c\/p\u003e\n\u003cp\u003eNoise Bug\u003c\/p\u003e\n\u003cp\u003eSwitched On\u003c\/p\u003e\n\u003cp\u003eThree Wave Music\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003e• Entire system recreated using original documentation, circuit board and art files and traditional manufacturing techniques.\u003c\/p\u003e\n\u003cp\u003e• 37 hand-stuffed, hand-soldered modules custom mounted and hand-wired in three solid wood, tolex-wrapped cabinets.\u003c\/p\u003e\n\u003cp\u003e• 10x discrete 901 series oscillators (Coveted for their organic sound. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 905 Spring Reverb module (Expands the character of any sound into enchanting, piano-like trails. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 4x CP3 mixers (These are tonally similar to the mixer found in the Model 15. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 984 4-channel Matrix Mixer (Designed for parallel processing, complete with dedicated controls for Bass and Treble. Not found in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• 100% discrete design (There are absolutely no op-amps. Not the case in the Model 15, System 35 or System 55)\u003c\/p\u003e\n\u003cp\u003e• Only 40 Moog Synthesizer IIIp will be handcrafted and sold worldwide\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTE: A new Synthesizer IIIp is built exactly as the originals. It also behaves exactly as the originals, which means tuning instability and susceptibility to interference is inherent to the design.\u003c\/p\u003e\n\u003cp\u003eSYNTHESIZER IIIp MODULES\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 901 Voltage Controlled Oscillator\u003c\/li\u003e\n\u003cli\u003e3x 901A Oscillator Controllers\u003c\/li\u003e\n\u003cli\u003e9x 901B Oscillators\u003c\/li\u003e\n\u003cli\u003e3x 902 Voltage Controlled Amplifiers\u003c\/li\u003e\n\u003cli\u003e1x 903A Random Signal Generator\u003c\/li\u003e\n\u003cli\u003e1x 904A Voltage Controlled Lowpass Filter\u003c\/li\u003e\n\u003cli\u003e1x 904B Voltage Controlled Highpass Filter\u003c\/li\u003e\n\u003cli\u003e1x 904C Filter Coupler\u003c\/li\u003e\n\u003cli\u003e1x 905 Reverberation Unit\u003c\/li\u003e\n\u003cli\u003e3x 911 Envelope Generators\u003c\/li\u003e\n\u003cli\u003e1x 911A Dual Trigger Delay\u003c\/li\u003e\n\u003cli\u003e1x 912 Envelope Follower\u003c\/li\u003e\n\u003cli\u003e1x 914 Extended Range Fixed Filter Bank\u003c\/li\u003e\n\u003cli\u003e1x 984 Four Channel Mixer\u003c\/li\u003e\n\u003cli\u003e1x 991 Lowpass and Highpass Filter with Attenuator\u003c\/li\u003e\n\u003cli\u003e1x 992 Control Voltage\/Attenuator Panel\u003c\/li\u003e\n\u003cli\u003e1x 993 Trigger \u0026amp; Envelope Voltages Panel\u003c\/li\u003e\n\u003cli\u003e1x 994 Multiples Panel\u003c\/li\u003e\n\u003cli\u003e4x Console Panel No. 3, each including:\u003c\/li\u003e\n\u003cli\u003e- 4-input mixer with + and – outputs\u003c\/li\u003e\n\u003cli\u003e- 2 Trunklines\u003c\/li\u003e\n\u003cli\u003e- Control Voltage Switches\u003c\/li\u003e\n\u003cli\u003e- Master Volume\u003c\/li\u003e\n\u003cli\u003e- Click Filter\u003c\/li\u003e\n\u003cli\u003e1x Console Panel No. 1 including:\u003c\/li\u003e\n\u003cli\u003e- 3 Control Voltage and Trigger Outputs\u003c\/li\u003e\n\u003cli\u003e1x Console Panel No. 9 including\u003c\/li\u003e\n\u003cli\u003e- Power Switch\u003c\/li\u003e\n\u003cli\u003e- Pilot Lamp\u003c\/li\u003e\n\u003cli\u003e- Fuse Holders\u003c\/li\u003e\n\u003cli\u003e1x 350 Watt 120 VAC or 230 VAC Switch Selectable Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e"}
Moog Synthesizer IIIp

Moog Synthesizer IIIp

$35,000.00

Synthesizer IIIp INFO The Synthesizer Concept Throughout the 1960s, Dr. Robert Moog collaborated with over 100 composers of electroacoustic music to create the synthesizer concept, born of thousands of design decisions and countless conversations. At the time, the available method of producing electronic music was the “classical studio,” a makes...


More Info
{"id":91352924186,"title":"Moog Subsequent 37 CV Paraphonic Analog Synthesizer (Limited Edition)","handle":"moog-subsequent-37-cv-paraphonic-analog-synthesizer-limited-edition","description":"Info\u003cbr\u003e\u003cbr\u003eToday we are excited to announce the Subsequent 37 CV. This limited-edition redesign of the ultra-powerful Sub 37 Tribute Edition analog synthesizer is limited to 2000 pieces worldwide, with the first 125 units built live on-site at Moogfest 2017. Anchored by a pair of solid aluminum side pieces inset with North American hardwood and affixed to a rugged steel and aluminum enclosure, it features four assignable CV outputs and two assignable Gate outputs for interconnectivity with large-format and Eurorack modular systems, an upgraded keybed for improved playability, a high-powered headphone amplifier for live-monitoring, and a modified analog signal path.\u003cbr\u003e\u003cbr\u003e“We are really excited to incorporate community feedback into the evolution of an instrument. Adding CV interconnectivity was the starting point, but we have also increased the headroom in the mixer and significantly extended the range of Multidrive, giving the Subsequent 37 CV expanded sonic capability and modular control.\" - Cyril Lance, Moog Chief Engineer\u003cbr\u003e\u003cbr\u003eThe Subsequent 37 CV’s mixer now has double the headroom of the Sub 37 Tribute Edition. Taking advantage of the mixer’s newfound flexibility, the gain-staging of the Ladder filter has been reshaped to boost harmonic saturation and analog compression. Completing the sonic evolution is a re-tuned Multidrive circuit that extends well beyond the grit and growl of the original Sub 37.\u003cbr\u003e\u003cbr\u003eSubsequent 37 CV production is limited to 2000 pieces worldwide. Each instrument is lovingly handcrafted by Moog employee-owners. The first 125 units are available for purchase exclusively through GuitarCenter.com, and on-site at the Moog Pop-Up Factory during Moogfest 2017, May 18-21.\u003cbr\u003e\u003cbr\u003eSPECS\u003cbr\u003e\u003cbr\u003eTYPE: Programmable Paraphonic Analog Synthesizer\u003cbr\u003eSOUND ENGINE: 100% Analog\u003cbr\u003eNUMBER OF KEYS: 37\u003cbr\u003eTYPE OF KEYS: Semi-Weighted with After Pressure\u003cbr\u003eCONTROLLERS: Pitch Bend, Mod Wheel, After Pressure, Velocity\u003cbr\u003ePOLYPHONY: Selectable Monophonic or Duophonic\u003cbr\u003eSOUND SOURCES: 2 Variable Waveshape Oscillators, 1 Square Wave Sub Oscillator, 1 Analog Noise\u003cbr\u003eGenerator, 1 External Input\/Filter Feedback\u003cbr\u003eOSCILLATOR CALIBRATION RANGE: 22Hz-6.8kHz. Guaranteed note range at 8’ of Note 18 to 116\u003cbr\u003eMOD SOURCES: Triangle, Square, Saw, Ramp, Sample \u0026amp; Hold, Filter EG\/PGM\u003cbr\u003eMOD DESTINATIONS: Osc 1 Pitch, Osc 2, Osc 1 \u0026amp; 2 Pitch, Filter, LFO Rate, VCA Level, Osc 1 Wave, Osc 2\u003cbr\u003eWave, Osc 1 \u0026amp; 2 Wave, Noise Level, EG Time, and Programmable Destinations\u003cbr\u003eFILTER: 20Hz-20kHz Moog Ladder Filter w\/ 6\/12\/18\/24 dB\/Oct Filter Slopes and MultiDrive\u003cbr\u003eAUDIO INPUT: 1xTS\u003cbr\u003eAUDIO OUTPUT: 1xTS, 1xTRS Headphone\u003cbr\u003ePRESETS: 256 Presets - 16 Banks, 16 Patches per Bank\u003cbr\u003eMIDI I\/O: DIN In, Out, and MIDI over USB\u003cbr\u003eCV\/GATE INPUTS: Filter CV, Pitch CV, Volume CV, KB Gate\u003cbr\u003eCV\/GATE OUTPUTS: 4x Assignable CV and 2x Assignable Gate\u003cbr\u003eTRANSPOSITION: +\/- 2 Octaves\u003cbr\u003eLFO: 0.01Hz - 1000Hz\u003cbr\u003eWEIGHT: 22LBS \/ 10KG\u003cbr\u003eDIMENSIONS: 6.75” H x 26.375” W x 14.75 D \/ 17cm H x 68cm W x 37.5cm D\u003cbr\u003eNOMINAL OPERATING TEMPERATURE: 10 - 35 C (50 - 95 F)\u003cbr\u003eOPERATIONAL TEMPERATURE RANGE: 10 - 50 C (50 - 122 F)\u003cbr\u003eINPUT VOLTAGE: 100 VAC - 240 VAC \/ 50 - 60 HZ \/ 13W\u003cbr\u003eSpecifications Subject To Change Without Notice","published_at":"2017-09-10T18:57:27+02:00","created_at":"2017-09-10T19:04:58+02:00","vendor":"Moog","type":"Phattys","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$1500 to $2000","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":179900,"price_min":179900,"price_max":179900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1104914546714,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LPS-SUB-006-XX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Subsequent 37 CV Paraphonic Analog Synthesizer (Limited Edition)","public_title":null,"options":["Default Title"],"price":179900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232613487"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_2037_20black.jpg?v=1505063155","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_2037_20CV_angle_20black_web.jpg?v=1505063166","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/CV_20jacks_black_web.jpg?v=1505063177"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_2037_20black.jpg?v=1505063155","options":["Title"],"content":"Info\u003cbr\u003e\u003cbr\u003eToday we are excited to announce the Subsequent 37 CV. This limited-edition redesign of the ultra-powerful Sub 37 Tribute Edition analog synthesizer is limited to 2000 pieces worldwide, with the first 125 units built live on-site at Moogfest 2017. Anchored by a pair of solid aluminum side pieces inset with North American hardwood and affixed to a rugged steel and aluminum enclosure, it features four assignable CV outputs and two assignable Gate outputs for interconnectivity with large-format and Eurorack modular systems, an upgraded keybed for improved playability, a high-powered headphone amplifier for live-monitoring, and a modified analog signal path.\u003cbr\u003e\u003cbr\u003e“We are really excited to incorporate community feedback into the evolution of an instrument. Adding CV interconnectivity was the starting point, but we have also increased the headroom in the mixer and significantly extended the range of Multidrive, giving the Subsequent 37 CV expanded sonic capability and modular control.\" - Cyril Lance, Moog Chief Engineer\u003cbr\u003e\u003cbr\u003eThe Subsequent 37 CV’s mixer now has double the headroom of the Sub 37 Tribute Edition. Taking advantage of the mixer’s newfound flexibility, the gain-staging of the Ladder filter has been reshaped to boost harmonic saturation and analog compression. Completing the sonic evolution is a re-tuned Multidrive circuit that extends well beyond the grit and growl of the original Sub 37.\u003cbr\u003e\u003cbr\u003eSubsequent 37 CV production is limited to 2000 pieces worldwide. Each instrument is lovingly handcrafted by Moog employee-owners. The first 125 units are available for purchase exclusively through GuitarCenter.com, and on-site at the Moog Pop-Up Factory during Moogfest 2017, May 18-21.\u003cbr\u003e\u003cbr\u003eSPECS\u003cbr\u003e\u003cbr\u003eTYPE: Programmable Paraphonic Analog Synthesizer\u003cbr\u003eSOUND ENGINE: 100% Analog\u003cbr\u003eNUMBER OF KEYS: 37\u003cbr\u003eTYPE OF KEYS: Semi-Weighted with After Pressure\u003cbr\u003eCONTROLLERS: Pitch Bend, Mod Wheel, After Pressure, Velocity\u003cbr\u003ePOLYPHONY: Selectable Monophonic or Duophonic\u003cbr\u003eSOUND SOURCES: 2 Variable Waveshape Oscillators, 1 Square Wave Sub Oscillator, 1 Analog Noise\u003cbr\u003eGenerator, 1 External Input\/Filter Feedback\u003cbr\u003eOSCILLATOR CALIBRATION RANGE: 22Hz-6.8kHz. Guaranteed note range at 8’ of Note 18 to 116\u003cbr\u003eMOD SOURCES: Triangle, Square, Saw, Ramp, Sample \u0026amp; Hold, Filter EG\/PGM\u003cbr\u003eMOD DESTINATIONS: Osc 1 Pitch, Osc 2, Osc 1 \u0026amp; 2 Pitch, Filter, LFO Rate, VCA Level, Osc 1 Wave, Osc 2\u003cbr\u003eWave, Osc 1 \u0026amp; 2 Wave, Noise Level, EG Time, and Programmable Destinations\u003cbr\u003eFILTER: 20Hz-20kHz Moog Ladder Filter w\/ 6\/12\/18\/24 dB\/Oct Filter Slopes and MultiDrive\u003cbr\u003eAUDIO INPUT: 1xTS\u003cbr\u003eAUDIO OUTPUT: 1xTS, 1xTRS Headphone\u003cbr\u003ePRESETS: 256 Presets - 16 Banks, 16 Patches per Bank\u003cbr\u003eMIDI I\/O: DIN In, Out, and MIDI over USB\u003cbr\u003eCV\/GATE INPUTS: Filter CV, Pitch CV, Volume CV, KB Gate\u003cbr\u003eCV\/GATE OUTPUTS: 4x Assignable CV and 2x Assignable Gate\u003cbr\u003eTRANSPOSITION: +\/- 2 Octaves\u003cbr\u003eLFO: 0.01Hz - 1000Hz\u003cbr\u003eWEIGHT: 22LBS \/ 10KG\u003cbr\u003eDIMENSIONS: 6.75” H x 26.375” W x 14.75 D \/ 17cm H x 68cm W x 37.5cm D\u003cbr\u003eNOMINAL OPERATING TEMPERATURE: 10 - 35 C (50 - 95 F)\u003cbr\u003eOPERATIONAL TEMPERATURE RANGE: 10 - 50 C (50 - 122 F)\u003cbr\u003eINPUT VOLTAGE: 100 VAC - 240 VAC \/ 50 - 60 HZ \/ 13W\u003cbr\u003eSpecifications Subject To Change Without Notice"}
Moog Subsequent 37 CV Paraphonic Analog Synthesizer (Limited Edition)

Moog Subsequent 37 CV Paraphonic Analog Synthesizer (Limited Edition)

$1,799.00

InfoToday we are excited to announce the Subsequent 37 CV. This limited-edition redesign of the ultra-powerful Sub 37 Tribute Edition analog synthesizer is limited to 2000 pieces worldwide, with the first 125 units built live on-site at Moogfest 2017. Anchored by a pair of solid aluminum side pieces inset with North American hardwood and affixed...


More Info
Sale
Moog Sub Phatty
Moog Sub Phatty

Phattys

$789.00 $839.00
{"id":8445670413,"title":"Moog Sub Phatty","handle":"lps-sub-001","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/phattys\/sub-phatty\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eSUB PHATTY | Moog Music Inc\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/phattys\/sub-phatty\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eMoog Sub Phatty Review. The latest in Moog’s synth arsenal is monophonic, has just 16 presets, and no screen. What’s not to like, asks Andy Jones…\u003c\/p\u003e\n\u003cp\u003eThe brand new Moog Sub Phatty is analogue, monophonic and described as ‘Moog’s grittiest synth’ yet. This is down to it being the first Moog to feature a ‘multidrive’ circuit, sitting just before the amplifier section, offering a few extra stones for the aforementioned grit. This, combined with a couple of other extras under the sonic bonnet, gives Sub Phatty an edgy Moog sound which you might want to sell your gran for. Fortunately, you won’t have to because, as well as being Moog’s grittiest synth, it’s also one of the company’s cheapest releases yet…\u003c\/p\u003e\n\u003cp\u003eOverview\u003cbr\u003eOut of the box, the quality is clear. Sub Phatty is reassuringly heavy, is built well, and has a rock solid feel. I especially love the end plates and that curved back – cool, modern but retro all in one.\u003c\/p\u003e\n\u003cp\u003eIt’s a subtractive synth with a familiar layout but there are several tweaks that Moog’s designers have added to give the synth more interest. At its heart are two main oscillators, a sub and a noise generator. The two oscillators can move gradually between waveforms (unlike many other synths where you switch between them) so you can sit between two waveforms. Already we have just that little extra flexibility and we’ve barely started. The sub oscilator is a square wave oscillator locked to one octave below that of oscillator 1′s pitch so dialling it in brings in the bass…\u003c\/p\u003e\n\u003cp\u003eThe biggest knob on the Phatty is the filter cut-off, always that dial you go to along with resonance to instantly show off acid stylee. The amount can also be controlled by other factors, including two envelope generators. The EG envelope controls how the filter cut-off is modulated by to the shape you’ve dialled in the filter envelope ADSR. The KB envelope gives you a similar reaction but this time dependant on the note played. Both offer some fantastic note movement options over both pitch and time.\u003c\/p\u003e\n\u003cp\u003eThe last dial in the Filter section is the multidrive circuit as mentioned above. It’s quite a simple concept, basically a drive circuit for added distortion and aggression placed between the filter and amp. But add it to the Sub oscillator and those sweepable waves and you have three factors that already give this synth some extra sonic character.\u003c\/p\u003e\n\u003cp\u003eModulate Me\u003cbr\u003eThe LFO section is the last major one to cover and again it’s simple… on the surface at least. You get five waveform sources plus the aforementioned filter envelope so you can get more hands on with the LFO shape using the ADSR dials. The rates at which these oscillate are determined by the LFO rate dial and what they oscillate – pitch, filter and waveform – are determined by the remaining three dials. The excellent manual takes you through how these can be used in practical situations including a great pulse wave modulation walkthrough that will have you pushing a waveform to its limits, all the time in time with the LFO. I’d recommend everyone to initiate one of the presets (i.e. so it’s silent – again this is clearly detailed in the manual) and then follow the walkthroughs. There’s an excellent kick drum one in there that recreates a classic 808. I took it further to create the ultimate bass kick – well, in my mind it was anyway…\u003c\/p\u003e\n\u003cp\u003eShift up\u003cbr\u003eShift Mode is where you can get a lot deeper into the Sub Phatty programming by adding functions to existing buttons and dials. So, for example, in Shift Mode the filter envelope decay dial becomes an additional hold parameter, adding a stage to the ADSR making it AHDSR so your note can linger between attack and decay. You can also access and change several other hidden parameters in Shift Mode like those filter slopes I mentioned earlier. There are also extra hidden parameters to access for transposition, Legato, glide, the LFO and both envelopes, plus as a huge amount of MIDI and system information.\u003c\/p\u003e\n\u003cp\u003eShift Mode is clever but constant referring to the manual to see which dial does what soon becomes tedious. Everything you change in Shift Mode can also be saved with the preset. The Phatty comes with 16 presets and you will have to save over one – a simple two button press process – if you come up with a great sound. Just 16 presets does sound limiting and Shift Mode is a little clunky. Luckily Moog has supplied free software to add unlimited presets and make programming a lot easier. As you can see from the screenshot in this article the software replicates the Phatty front panel and shows more of the Shift Mode functions as well as the load and save preset options. It therefore makes using all of this extra functionality and preset management a breeze.\u003c\/p\u003e\n\u003cp\u003eSounds\u003cbr\u003eSo what do all of these parameters give us in terms of sound? It would be very easy for me to just say ‘really fat sounds’ and just move on, but you deserve more and, in fact, the synth is capable of more. I’ve already touched on the sub oscillator and this will give you plenty of bottom end. That’s not to say that the two main oscillators are lacking anything down there. But it’s the multidrive section that really enables you to add grit, and grit is what this synth is all about.\u003c\/p\u003e\n\u003cp\u003eOne of the presets has a fantastic filter envelope which takes it from an almost punchy lead to a deep bass in a second. The grime you get with it is palpable and it’s all from the multidrive – there is almost no sub oscillator on it as it simply isn’t needed. The next preset is all bass, again a lot from the multidrive and this time with heaps of sub, short attack times and long releases for a sound that could be the backbone of any bass tune. Other sounds include a fantastic punchy, almost metallic bass that was produced, on further discovery, by two pulse waveforms, plenty of sub for a massive analogue finish and almost no multidrive. It would have been nice to have different banks of 16 different presets to load in to really hear what the synth is capable of from the off but I suspect that these will come with updates to the software.\u003c\/p\u003e\n\u003cp\u003eWhich leads me to conclude that the bass is big in this one, yes, but the Sub Phatty is capable of a lot more than that. Within the 16 presets you get are some superb examples of this, both the biggest basses you can imagine along with some incredibly punchy lead sounds. Delve into Shift Mode for the extra programmability that this brings (although do use the software!) because you will get some great results out of the Sub Phatty very quickly.\u003c\/p\u003e\n\u003cp\u003eConclusion\u003cbr\u003eIt would be easy to focus on negatives with the Sub Phatty. Certainly the lack of screen will put many post 1985-synth users off, as will the number of presets and their selection. But hook it up to a computer and both negatives are pretty much negated – and who hasn’t got a computer in music making these days? And, sure, the keyboard’s not exactly a playing vehicle – two octaves does not a Richard Clayderman make – but do you need more than a couple of octaves to play bass or lead? These sounds are clearly (especially the former) where the Phatty’s strengths lie, so it will be used for playing either basslines and the occasional tearing lead, not both simultaneously.\u003c\/p\u003e\n\u003cp\u003eThe Sub Phatty excels at sound creation and manipulation – exact and very effective tweaking, dramatic dialling and almost constant saving as you come across a sound you will want to return to. And I really do see its home within a creative programming environment like this, something to take your sounds higher, and in that respect it fills its tight brief superbly and your sounds will benefit hugely…\u003c\/p\u003e\n\u003cp\u003eAnd the word ‘your’ is probably the crux of Moog’s argument, and to a certain extent mine. If you want ‘your’ sound to be the same as that produced by everyone else with a similar set-up of VA soft synths then look elsewhere. But if you want one item to take elements of your sonics onto another level and make you stand out just that little bit then the Sub Phatty is a great option. It might cost to do that – £859 is not cheap for any synth these days – but, once upon a time, it cost a lot to make music and that limitation resulted in people being a lot more creative with their kit. So perhaps if we all spend rather more on higher quality beasts like the Sub Phatty we might get more original results and rediscover our creative selves in the process? I can only dream…\u003c\/p\u003e\n\u003cp\u003eVerdict\u003cbr\u003e+ Stunning sound\u003cbr\u003e+ Easy signal flow\u003cbr\u003e+ Great drive circuit and bassy sub oscillator\u003cbr\u003e+ Extra layer of options for deep programmability\u003cbr\u003e+ Easy preset management within the software\u003c\/p\u003e\n\u003cp\u003e– Could have done with more ‘banks’ to show the sounds off\u003c\/p\u003e\n\u003cp\u003eA boutique synth that will give you some great lows and punchy highs to work with. Use it with the accompanying software and you won’t look back…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-15T18:22:00+02:00","created_at":"2016-11-15T18:24:00+02:00","vendor":"Moog","type":"Phattys","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$750 to $1000","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":78900,"price_min":78900,"price_max":78900,"available":true,"price_varies":false,"compare_at_price":83900,"compare_at_price_min":83900,"compare_at_price_max":83900,"compare_at_price_varies":false,"variants":[{"id":28517364429,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LPS-SUB-001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Sub Phatty","public_title":null,"options":["Default Title"],"price":78900,"weight":0,"compare_at_price":83900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"094922423887"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty1small.jpg?v=1479227229","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty2small.jpg?v=1479227242","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty_Knobs.jpg?v=1479227255","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/subpre.jpg?v=1479227268","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty4press.jpg?v=1479227287","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty7.jpg?v=1479227306"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Sub_20Phatty1small.jpg?v=1479227229","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/phattys\/sub-phatty\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eSUB PHATTY | Moog Music Inc\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/phattys\/sub-phatty\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eMoog Sub Phatty Review. The latest in Moog’s synth arsenal is monophonic, has just 16 presets, and no screen. What’s not to like, asks Andy Jones…\u003c\/p\u003e\n\u003cp\u003eThe brand new Moog Sub Phatty is analogue, monophonic and described as ‘Moog’s grittiest synth’ yet. This is down to it being the first Moog to feature a ‘multidrive’ circuit, sitting just before the amplifier section, offering a few extra stones for the aforementioned grit. This, combined with a couple of other extras under the sonic bonnet, gives Sub Phatty an edgy Moog sound which you might want to sell your gran for. Fortunately, you won’t have to because, as well as being Moog’s grittiest synth, it’s also one of the company’s cheapest releases yet…\u003c\/p\u003e\n\u003cp\u003eOverview\u003cbr\u003eOut of the box, the quality is clear. Sub Phatty is reassuringly heavy, is built well, and has a rock solid feel. I especially love the end plates and that curved back – cool, modern but retro all in one.\u003c\/p\u003e\n\u003cp\u003eIt’s a subtractive synth with a familiar layout but there are several tweaks that Moog’s designers have added to give the synth more interest. At its heart are two main oscillators, a sub and a noise generator. The two oscillators can move gradually between waveforms (unlike many other synths where you switch between them) so you can sit between two waveforms. Already we have just that little extra flexibility and we’ve barely started. The sub oscilator is a square wave oscillator locked to one octave below that of oscillator 1′s pitch so dialling it in brings in the bass…\u003c\/p\u003e\n\u003cp\u003eThe biggest knob on the Phatty is the filter cut-off, always that dial you go to along with resonance to instantly show off acid stylee. The amount can also be controlled by other factors, including two envelope generators. The EG envelope controls how the filter cut-off is modulated by to the shape you’ve dialled in the filter envelope ADSR. The KB envelope gives you a similar reaction but this time dependant on the note played. Both offer some fantastic note movement options over both pitch and time.\u003c\/p\u003e\n\u003cp\u003eThe last dial in the Filter section is the multidrive circuit as mentioned above. It’s quite a simple concept, basically a drive circuit for added distortion and aggression placed between the filter and amp. But add it to the Sub oscillator and those sweepable waves and you have three factors that already give this synth some extra sonic character.\u003c\/p\u003e\n\u003cp\u003eModulate Me\u003cbr\u003eThe LFO section is the last major one to cover and again it’s simple… on the surface at least. You get five waveform sources plus the aforementioned filter envelope so you can get more hands on with the LFO shape using the ADSR dials. The rates at which these oscillate are determined by the LFO rate dial and what they oscillate – pitch, filter and waveform – are determined by the remaining three dials. The excellent manual takes you through how these can be used in practical situations including a great pulse wave modulation walkthrough that will have you pushing a waveform to its limits, all the time in time with the LFO. I’d recommend everyone to initiate one of the presets (i.e. so it’s silent – again this is clearly detailed in the manual) and then follow the walkthroughs. There’s an excellent kick drum one in there that recreates a classic 808. I took it further to create the ultimate bass kick – well, in my mind it was anyway…\u003c\/p\u003e\n\u003cp\u003eShift up\u003cbr\u003eShift Mode is where you can get a lot deeper into the Sub Phatty programming by adding functions to existing buttons and dials. So, for example, in Shift Mode the filter envelope decay dial becomes an additional hold parameter, adding a stage to the ADSR making it AHDSR so your note can linger between attack and decay. You can also access and change several other hidden parameters in Shift Mode like those filter slopes I mentioned earlier. There are also extra hidden parameters to access for transposition, Legato, glide, the LFO and both envelopes, plus as a huge amount of MIDI and system information.\u003c\/p\u003e\n\u003cp\u003eShift Mode is clever but constant referring to the manual to see which dial does what soon becomes tedious. Everything you change in Shift Mode can also be saved with the preset. The Phatty comes with 16 presets and you will have to save over one – a simple two button press process – if you come up with a great sound. Just 16 presets does sound limiting and Shift Mode is a little clunky. Luckily Moog has supplied free software to add unlimited presets and make programming a lot easier. As you can see from the screenshot in this article the software replicates the Phatty front panel and shows more of the Shift Mode functions as well as the load and save preset options. It therefore makes using all of this extra functionality and preset management a breeze.\u003c\/p\u003e\n\u003cp\u003eSounds\u003cbr\u003eSo what do all of these parameters give us in terms of sound? It would be very easy for me to just say ‘really fat sounds’ and just move on, but you deserve more and, in fact, the synth is capable of more. I’ve already touched on the sub oscillator and this will give you plenty of bottom end. That’s not to say that the two main oscillators are lacking anything down there. But it’s the multidrive section that really enables you to add grit, and grit is what this synth is all about.\u003c\/p\u003e\n\u003cp\u003eOne of the presets has a fantastic filter envelope which takes it from an almost punchy lead to a deep bass in a second. The grime you get with it is palpable and it’s all from the multidrive – there is almost no sub oscillator on it as it simply isn’t needed. The next preset is all bass, again a lot from the multidrive and this time with heaps of sub, short attack times and long releases for a sound that could be the backbone of any bass tune. Other sounds include a fantastic punchy, almost metallic bass that was produced, on further discovery, by two pulse waveforms, plenty of sub for a massive analogue finish and almost no multidrive. It would have been nice to have different banks of 16 different presets to load in to really hear what the synth is capable of from the off but I suspect that these will come with updates to the software.\u003c\/p\u003e\n\u003cp\u003eWhich leads me to conclude that the bass is big in this one, yes, but the Sub Phatty is capable of a lot more than that. Within the 16 presets you get are some superb examples of this, both the biggest basses you can imagine along with some incredibly punchy lead sounds. Delve into Shift Mode for the extra programmability that this brings (although do use the software!) because you will get some great results out of the Sub Phatty very quickly.\u003c\/p\u003e\n\u003cp\u003eConclusion\u003cbr\u003eIt would be easy to focus on negatives with the Sub Phatty. Certainly the lack of screen will put many post 1985-synth users off, as will the number of presets and their selection. But hook it up to a computer and both negatives are pretty much negated – and who hasn’t got a computer in music making these days? And, sure, the keyboard’s not exactly a playing vehicle – two octaves does not a Richard Clayderman make – but do you need more than a couple of octaves to play bass or lead? These sounds are clearly (especially the former) where the Phatty’s strengths lie, so it will be used for playing either basslines and the occasional tearing lead, not both simultaneously.\u003c\/p\u003e\n\u003cp\u003eThe Sub Phatty excels at sound creation and manipulation – exact and very effective tweaking, dramatic dialling and almost constant saving as you come across a sound you will want to return to. And I really do see its home within a creative programming environment like this, something to take your sounds higher, and in that respect it fills its tight brief superbly and your sounds will benefit hugely…\u003c\/p\u003e\n\u003cp\u003eAnd the word ‘your’ is probably the crux of Moog’s argument, and to a certain extent mine. If you want ‘your’ sound to be the same as that produced by everyone else with a similar set-up of VA soft synths then look elsewhere. But if you want one item to take elements of your sonics onto another level and make you stand out just that little bit then the Sub Phatty is a great option. It might cost to do that – £859 is not cheap for any synth these days – but, once upon a time, it cost a lot to make music and that limitation resulted in people being a lot more creative with their kit. So perhaps if we all spend rather more on higher quality beasts like the Sub Phatty we might get more original results and rediscover our creative selves in the process? I can only dream…\u003c\/p\u003e\n\u003cp\u003eVerdict\u003cbr\u003e+ Stunning sound\u003cbr\u003e+ Easy signal flow\u003cbr\u003e+ Great drive circuit and bassy sub oscillator\u003cbr\u003e+ Extra layer of options for deep programmability\u003cbr\u003e+ Easy preset management within the software\u003c\/p\u003e\n\u003cp\u003e– Could have done with more ‘banks’ to show the sounds off\u003c\/p\u003e\n\u003cp\u003eA boutique synth that will give you some great lows and punchy highs to work with. Use it with the accompanying software and you won’t look back…\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog Sub Phatty

Moog Sub Phatty

$789.00

SUB PHATTY | Moog Music Inc Moog Sub Phatty Review. The latest in Moog’s synth arsenal is monophonic, has just 16 presets, and no screen. What’s not to like, asks Andy Jones… The brand new Moog Sub Phatty is analogue, monophonic and described as ‘Moog’s grittiest synth’ yet. This is down to it being the first Moog to feature a ‘multidriv...


More Info
{"id":8442392141,"title":"Moog Sequencer Complement B Expansion Cabinet","handle":"mod-seq-b-01","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/modulars\/sequencer-complement-b\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eSequencer Complement B | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/modulars\/sequencer-complement-b\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eFaithfully Recreating The Sequencer Complement B Expansion Cabinet\u003c\/p\u003e\n\u003cp\u003eOver the course of 3 years Moog Music set out to research and build faithful recreations of the System 35, System 55 and the Moog Sequencer Complement B expansion cabinet. Using all original documentation as well as circuit board and art files for every module, Moog Engineers have painstakingly recreated this rare creative gem.\u003c\/p\u003e\n\u003cp\u003eEach Sequencer Complement B expansion cabinet is hand-built to its original 1974 Moog factory specifications and is a true recreation of the original. Individual modules are brought to life just as the originals were, by hand-stuffing and hand-soldering components to circuit boards, and using traditional wiring methods. Each module is then finished with a photo-etched aluminum panel, and placed in its new modular instrument.\u003c\/p\u003e\n\u003cp\u003eThis limited reissue of the Moog Sequencer Complement B expansion cabinet is built to order, and is available in limited quantities while parts remain.\u003c\/p\u003e\n\u003cp\u003eSequencer Complement B Modules\u003c\/p\u003e\n\u003cp\u003e2x 960 Sequential Controllers\u003c\/p\u003e\n\u003cp\u003e1x 961 Interface\u003c\/p\u003e\n\u003cp\u003e2x 962 Sequential Switch\u003c\/p\u003e\n\u003cp\u003e1x 994 Dual Multiples Panel\u003c\/p\u003e\n\u003cp\u003eWeights and Dimensions\u003c\/p\u003e\n\u003cp\u003eMain Cabinet\u003c\/p\u003e\n\u003cp\u003eWeight: 60 lbs\u003c\/p\u003e\n\u003cp\u003eDimension: 48 ½” wide x 15 ½” high x 14” deep\u003c\/p\u003e\n\u003cp\u003ePower \u003c\/p\u003e\n\u003cp\u003ePowered by main console\u003c\/p\u003e\n\u003cp\u003eModules And Their Original “Functional Descriptions”.\u003c\/p\u003e\n\u003cp\u003e960 Sequential Controllers: The 960 Sequential Controller has a wide variation of functions, both as an independent module and in combination with the 961Interface and 962 Sequential Switch.\u003c\/p\u003e\n\u003cp\u003eThe sequencer module consists of a voltage controlled clock oscillator, which drives three rows of eight steps each. Indicatorlights show sequence and step position status. A separate potentiometer for each step permits up to eight different voltage settings to be selected for each row. The DC voltage output corresponds to the column of pots below the lighted stage. Voltagerange switches for each row determine the DC voltage range ofeach pot with two volts {X1}, four volts {X2}, or eight volts{X4} maximum extent. Two parallel outputs are provided for eachrow. Jacks for trigger inputs and outputs appear below each column. Trigger inputs activate that stage independently of theclock oscillator trigger. Trigger outputs are available for anyother V-trigger activated input. Manual trigger buttons as well,are included for each of the eight stages {found below the V-trigger jacks}. Switches found immediately below each step position permit normal, skip or stop functions. A ninth positionproviding skip {continuous progression through the eight steps}or stop {one progression to closure} functions is included at theend of the row. Timing control for the eight steps is accomplished via the Third Row Control of Timing switch. This switchconnects the third row of the sequencer into the control input ofthe clock speed for each stage according to the settings on thethird row potentiometers. The Shift input admits an externalclock input to the sequencing circuit. This input may be used inaddition to or exclusive of the internal clock oscillator trigger. Manual shift from step to step is accomplished with the button next to the shift input jack, as well as individual manual trigger buttons for each step found under each step column.\u003c\/p\u003e\n\u003cp\u003eManual buttons or external v-trigger sources initiate the clock oscillator start and stop functions. The clock oscillator is capable of producing frequencies from .1Hz to 1kHz. It has both octave {range} and vernier {fine adjust} controls. One control input jack is available, as well as one rectangular wave output {approximately 90\/10% duty cycle}. The clock oscillator, like other Moog oscillators, is standardized to one volt per octave.\u003c\/p\u003e\n\u003cp\u003e961 Interface: Four independent circuits are found on the 961 Interface: one Audio-In to V-trigger Out circuit, one S-trigger In to V-Trigger Out circuit, and two V-trigger In to S-trigger Out circuits. All interface circuits may be used simultaneously, in combination, or separately.\u003c\/p\u003e\n\u003cp\u003eThe Audio to V-trigger circuit generates V-triggers when the audio input level rises above the threshold set on the Sensitivity potentiometer. This V-trigger sensitivity varies with the frequency band of the audio signal and with the frequency of its amplitude peaks. V-trigger duration is commensurate with the length of time the audio signal remains above the sensitivity threshold. Two parallel V-trigger outputs are included.\u003c\/p\u003e\n\u003cp\u003eThe S-trigger to V-trigger circuits converts any Short-to-ground trigger input to a v-trigger output.\u003c\/p\u003e\n\u003cp\u003eEach V-trigger In to S-trigger Out circuit has two columns of six jacks each for input triggers and one S-trigger output. Column A of the V-trigger inputs will convert V-trigger signals to S-triggers with duration equal to the input. Column B determines S-trigger duration by the Switch-on-time knob ONLY. B Column S-triggers will block, extend or fore-shorten Column B V-trigger inputs to conform to whatever duration is indicated on the B-column potentiometer. A minimum switch-on-time of 40 milliseconds and maximum time of 4 seconds duration is available. Simultaneous inputs to both A and B columns may be made. Simultaneous inputs to two parallel jacks will result in the longer of the two trigger signals being accepted.\u003c\/p\u003e\n\u003cp\u003e962 Sequential Switch: The 962 Sequential Switch selects between two or three signal inputs, coupling one signal to the output jack at a time. A V-trigger pulse introduced to the Shift Input initiates the sequence. The Sequential Switch will alternate between stages One and Two, disregarding stage three until a standard {tip-sleeve} phone plug is patched into Signal Input Three. A connection to Input Three will cause the Sequential Switch to alternate between the three stages {in order) when triggered. Separate V-trigger input and output jacks are provided far each of the three stages, as well as buttons for manual switching. A small light for each stage indicates its status, on {coupled to the output} or off.\u003c\/p\u003e\n\u003cp\u003e994 Dual Multiples Panel: The multiple is a device, which permits multiple distribution of one signal to several different places. This process is often called signal splitting. Multiples are used for many purposes; from linking two patch cords together, sending a single signal to several different modules at the same time, to doubling or trebling the amplitude of a signal by sending it X3 to a particular source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-14T17:47:00+02:00","created_at":"2016-11-14T17:50:10+02:00","vendor":"Moog","type":"Synthesizers","tags":["Keyboards \u0026 Synthesizers","Modulars","Moog","Price Range_$3000 and Over","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":995000,"price_min":995000,"price_max":995000,"available":true,"price_varies":false,"compare_at_price":850000,"compare_at_price_min":850000,"compare_at_price_max":850000,"compare_at_price_varies":false,"variants":[{"id":28501078285,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-SEQ-B-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Sequencer Complement B Expansion Cabinet","public_title":null,"options":["Default Title"],"price":995000,"weight":0,"compare_at_price":850000,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232216626"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SEQ_CB.jpg?v=1479138641","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/960-front_web.jpg?v=1479138664"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SEQ_CB.jpg?v=1479138641","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/modulars\/sequencer-complement-b\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eSequencer Complement B | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/modulars\/sequencer-complement-b\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eFaithfully Recreating The Sequencer Complement B Expansion Cabinet\u003c\/p\u003e\n\u003cp\u003eOver the course of 3 years Moog Music set out to research and build faithful recreations of the System 35, System 55 and the Moog Sequencer Complement B expansion cabinet. Using all original documentation as well as circuit board and art files for every module, Moog Engineers have painstakingly recreated this rare creative gem.\u003c\/p\u003e\n\u003cp\u003eEach Sequencer Complement B expansion cabinet is hand-built to its original 1974 Moog factory specifications and is a true recreation of the original. Individual modules are brought to life just as the originals were, by hand-stuffing and hand-soldering components to circuit boards, and using traditional wiring methods. Each module is then finished with a photo-etched aluminum panel, and placed in its new modular instrument.\u003c\/p\u003e\n\u003cp\u003eThis limited reissue of the Moog Sequencer Complement B expansion cabinet is built to order, and is available in limited quantities while parts remain.\u003c\/p\u003e\n\u003cp\u003eSequencer Complement B Modules\u003c\/p\u003e\n\u003cp\u003e2x 960 Sequential Controllers\u003c\/p\u003e\n\u003cp\u003e1x 961 Interface\u003c\/p\u003e\n\u003cp\u003e2x 962 Sequential Switch\u003c\/p\u003e\n\u003cp\u003e1x 994 Dual Multiples Panel\u003c\/p\u003e\n\u003cp\u003eWeights and Dimensions\u003c\/p\u003e\n\u003cp\u003eMain Cabinet\u003c\/p\u003e\n\u003cp\u003eWeight: 60 lbs\u003c\/p\u003e\n\u003cp\u003eDimension: 48 ½” wide x 15 ½” high x 14” deep\u003c\/p\u003e\n\u003cp\u003ePower \u003c\/p\u003e\n\u003cp\u003ePowered by main console\u003c\/p\u003e\n\u003cp\u003eModules And Their Original “Functional Descriptions”.\u003c\/p\u003e\n\u003cp\u003e960 Sequential Controllers: The 960 Sequential Controller has a wide variation of functions, both as an independent module and in combination with the 961Interface and 962 Sequential Switch.\u003c\/p\u003e\n\u003cp\u003eThe sequencer module consists of a voltage controlled clock oscillator, which drives three rows of eight steps each. Indicatorlights show sequence and step position status. A separate potentiometer for each step permits up to eight different voltage settings to be selected for each row. The DC voltage output corresponds to the column of pots below the lighted stage. Voltagerange switches for each row determine the DC voltage range ofeach pot with two volts {X1}, four volts {X2}, or eight volts{X4} maximum extent. Two parallel outputs are provided for eachrow. Jacks for trigger inputs and outputs appear below each column. Trigger inputs activate that stage independently of theclock oscillator trigger. Trigger outputs are available for anyother V-trigger activated input. Manual trigger buttons as well,are included for each of the eight stages {found below the V-trigger jacks}. Switches found immediately below each step position permit normal, skip or stop functions. A ninth positionproviding skip {continuous progression through the eight steps}or stop {one progression to closure} functions is included at theend of the row. Timing control for the eight steps is accomplished via the Third Row Control of Timing switch. This switchconnects the third row of the sequencer into the control input ofthe clock speed for each stage according to the settings on thethird row potentiometers. The Shift input admits an externalclock input to the sequencing circuit. This input may be used inaddition to or exclusive of the internal clock oscillator trigger. Manual shift from step to step is accomplished with the button next to the shift input jack, as well as individual manual trigger buttons for each step found under each step column.\u003c\/p\u003e\n\u003cp\u003eManual buttons or external v-trigger sources initiate the clock oscillator start and stop functions. The clock oscillator is capable of producing frequencies from .1Hz to 1kHz. It has both octave {range} and vernier {fine adjust} controls. One control input jack is available, as well as one rectangular wave output {approximately 90\/10% duty cycle}. The clock oscillator, like other Moog oscillators, is standardized to one volt per octave.\u003c\/p\u003e\n\u003cp\u003e961 Interface: Four independent circuits are found on the 961 Interface: one Audio-In to V-trigger Out circuit, one S-trigger In to V-Trigger Out circuit, and two V-trigger In to S-trigger Out circuits. All interface circuits may be used simultaneously, in combination, or separately.\u003c\/p\u003e\n\u003cp\u003eThe Audio to V-trigger circuit generates V-triggers when the audio input level rises above the threshold set on the Sensitivity potentiometer. This V-trigger sensitivity varies with the frequency band of the audio signal and with the frequency of its amplitude peaks. V-trigger duration is commensurate with the length of time the audio signal remains above the sensitivity threshold. Two parallel V-trigger outputs are included.\u003c\/p\u003e\n\u003cp\u003eThe S-trigger to V-trigger circuits converts any Short-to-ground trigger input to a v-trigger output.\u003c\/p\u003e\n\u003cp\u003eEach V-trigger In to S-trigger Out circuit has two columns of six jacks each for input triggers and one S-trigger output. Column A of the V-trigger inputs will convert V-trigger signals to S-triggers with duration equal to the input. Column B determines S-trigger duration by the Switch-on-time knob ONLY. B Column S-triggers will block, extend or fore-shorten Column B V-trigger inputs to conform to whatever duration is indicated on the B-column potentiometer. A minimum switch-on-time of 40 milliseconds and maximum time of 4 seconds duration is available. Simultaneous inputs to both A and B columns may be made. Simultaneous inputs to two parallel jacks will result in the longer of the two trigger signals being accepted.\u003c\/p\u003e\n\u003cp\u003e962 Sequential Switch: The 962 Sequential Switch selects between two or three signal inputs, coupling one signal to the output jack at a time. A V-trigger pulse introduced to the Shift Input initiates the sequence. The Sequential Switch will alternate between stages One and Two, disregarding stage three until a standard {tip-sleeve} phone plug is patched into Signal Input Three. A connection to Input Three will cause the Sequential Switch to alternate between the three stages {in order) when triggered. Separate V-trigger input and output jacks are provided far each of the three stages, as well as buttons for manual switching. A small light for each stage indicates its status, on {coupled to the output} or off.\u003c\/p\u003e\n\u003cp\u003e994 Dual Multiples Panel: The multiple is a device, which permits multiple distribution of one signal to several different places. This process is often called signal splitting. Multiples are used for many purposes; from linking two patch cords together, sending a single signal to several different modules at the same time, to doubling or trebling the amplitude of a signal by sending it X3 to a particular source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog Sequencer Complement B Expansion Cabinet

Moog Sequencer Complement B Expansion Cabinet

$9,950.00

Sequencer Complement B | Moog Music Inc Faithfully Recreating The Sequencer Complement B Expansion Cabinet Over the course of 3 years Moog Music set out to research and build faithful recreations of the System 35, System 55 and the Moog Sequencer Complement B expansion cabinet. Using all original documentation as well as circuit board a...


More Info
Sale
Moog Mother-32
Moog Mother-32

Semi Modular

$599.00 $679.00
{"id":8442430093,"title":"Moog Mother-32","handle":"mod-mother-032","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/mother-32\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003e32 | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/mother-32\"\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration.\u003c\/p\u003e\n\u003cp\u003eMother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.\u003c\/p\u003e\n\u003cp\u003e• Semi-Modular design requires no patching for swift, inspired music creation\u003c\/p\u003e\n\u003cp\u003e• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations\u003c\/p\u003e\n\u003cp\u003e• Low Pass \u0026amp; High Pass Moog Ladder Filter (20Hz–20kHz) with voltage controlled resonance\u003c\/p\u003e\n\u003cp\u003e• External audio input for processing outside sound sources\u003c\/p\u003e\n\u003cp\u003e• Definitive Moog oscillator with Pulse and Sawtooth wave outputs\u003c\/p\u003e\n\u003cp\u003e• 5-pin MIDI input and MIDI to CV converter\u003c\/p\u003e\n\u003cp\u003e• 32 Modular Patch Points (Includes 5 patch cables)\u003c\/p\u003e\n\u003cp\u003e• 2 Voltage controlled mixers\u003c\/p\u003e\n\u003cp\u003e• Superb companion to Werkstatt 01, Minitaur and other synthesizers\u003c\/p\u003e\n\u003cp\u003e• Main module can be easily transferred into a Eurorack skiff or case\u003c\/p\u003e\n\u003cp\u003e• Mount 2 or 3 units vertically with optional 2 and 3 Tier kits\u003c\/p\u003e\n\u003cp\u003e• Complete solution for new Eurorack users – no other items required\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specs-tab\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eVOLTAGE CONTROLLED OSCILLATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle VCO with simultaneous Sawtooth and Pulse wave Outputs (+\/-5V)\u003c\/li\u003e\n\u003cli\u003e1 V\/Octave from 8Hz to 8KHz (16KHz max with LFO\/CV)\u003c\/li\u003e\n\u003cli\u003ePanel Frequency control (+\/-1 Octave)\u003c\/li\u003e\n\u003cli\u003eToggle Selector for waveform routed to the mixer\u003c\/li\u003e\n\u003cli\u003ePulse Width control\u003c\/li\u003e\n\u003cli\u003eLinear FM and 1V\/Octave Exponential FM inputs (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOISE\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput normalled to Ext Audio input\u003c\/li\u003e\n\u003cli\u003eWhite Noise output (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED MIXER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrossfades between selected VCO waveform and Ext Audio input (normalled to White Noise)\u003c\/li\u003e\n\u003cli\u003eMix CV input (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED FILTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20Hz to 20KHz switchable Low Pass\/High Pass 4-pole Transistor Ladder Filter with voltage controlled Resonance\u003c\/li\u003e\n\u003cli\u003eVCF Cutoff input (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eVCF Resonance input (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eVCF Output (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED AMPLIFIER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable CV Source: EG or ON (drone)\u003c\/li\u003e\n\u003cli\u003eVCA CV input (0 to +8V in EG mode and +\/-5V in ON mode, summed with signals from ON\/EG switch)    \u003c\/li\u003e\n\u003cli\u003eOutput Volume Control (VCA Out and Line\/Headphone Out)\u003c\/li\u003e\n\u003cli\u003eVCA output (+\/-5V) and rear panel 1\/4\" Headphone\/Audio Output (+\/-1.7V peak)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLOW FREQUENCY OSCILLATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSquare wave output (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eTriangle wave output (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eSelectable waveshape to VCO and VCF MOD sections\u003c\/li\u003e\n\u003cli\u003ePanel Rate control .1Hz to 350Hz  (600Hz max)\u003c\/li\u003e\n\u003cli\u003eLFO Rate CV input (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eENVELOPE GENERATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable controls for Attack and Decay\u003c\/li\u003e\n\u003cli\u003eSustain ON\/OFF for single-trigger (ASD) or multi-trigger (AD) behavior\u003c\/li\u003e\n\u003cli\u003eExternal Gate input (0 to +5V; Tolerant of 10V gates)\u003c\/li\u003e\n\u003cli\u003eEG output (0 to +7.5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVCO MODULATION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable Source: EG\/VCO MOD or LFO (EG normalled to VCO MOD in)\u003c\/li\u003e\n\u003cli\u003eVCO Mod input (normalled to EG\/VCO MOD switch position)\u003c\/li\u003e\n\u003cli\u003eVariable Modulation Amount control\u003c\/li\u003e\n\u003cli\u003eSelectable Modulation Destination: VCO Pitch or PWM (PWM summed with Pulse Width panel control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVCF MODULATION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable Source: EG or LFO\u003c\/li\u003e\n\u003cli\u003eVariable Modulation Amount control\u003c\/li\u003e\n\u003cli\u003eSelectable VCF Modulation Polarity (+\/-)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED MIXER\/ATTENUATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage controlled crossfade\/mix circuit for mixing two DC coupled signals\u003c\/li\u003e\n\u003cli\u003eMix 1 Input (Normalled to ground)\u003c\/li\u003e\n\u003cli\u003eMix 2 Input (Normalled to +5V)\u003c\/li\u003e\n\u003cli\u003eMix Control CV input (-5V to +5V)\u003c\/li\u003e\n\u003cli\u003eMix Output: Un-inverted output (-5 to +5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMULTIPLE\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x input 2x output signal multiplier\u003c\/li\u003e\n\u003cli\u003eMult Input: Buffered signal\u003c\/li\u003e\n\u003cli\u003eMult Outputs: 1 and 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKEYBOARD\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle octave 13-note keyboard (In Step Edit Mode this is used to select, mute and enable sequencer steps.)\u003c\/li\u003e\n\u003cli\u003eOctave Up\/Down buttons select from 8 available octave settings\u003c\/li\u003e\n\u003cli\u003eGlide Time control\u003c\/li\u003e\n\u003cli\u003eKB CV output (-5 to +5V)\u003c\/li\u003e\n\u003cli\u003eGate Output  (0 to +5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSEQUENCER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-mode 32 step sequencer with 64 sequence locations\u003c\/li\u003e\n\u003cli\u003ePerformance Modes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e-     In KB Mode, the Keyboard is used to play the instrument, enter sequence data and transpose sequences.\u003c\/p\u003e\n\u003cp\u003e-     In Step Mode, the keyboard functions as the step sequencer interface and is used to enable and mute steps, update note data and select sequence banks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach sequence step includes: Note Value, Gate Length (Tie), Rest On\/Off, Accent On\/Off, Glide On\/Off and Ratchet count (up to 4 note-repeats occurring in the duration of a single note)\u003c\/li\u003e\n\u003cli\u003eSequencer Panel Controls: Tempo, Swing, Run\/Stop, Hold, and Reset\u003c\/li\u003e\n\u003cli\u003eSequencer Control Inputs: Tempo, Run\/Stop (also used for sync), Reset and Hold\u003c\/li\u003e\n\u003cli\u003eSequencer Control Outputs: KB, Gate, Accent Pulse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePATCHBAY\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe patchbay contains 32 patch points (3.5mm)\u003c\/li\u003e\n\u003cli\u003eAvailable Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V\/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate, Tempo, Run\/Stop, Reset and Hold\u003c\/li\u003e\n\u003cli\u003eAvailable Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB, Gate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eASSIGNABLE OUTPUT\u003c\/p\u003e\n\u003cp\u003e        • Multipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock \/2 Sequencer Clock \/4, Decimated \"Ramp”,                   Decimated \"Saw”, Decimated \"Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2,                 MIDI CC4 and MIDI CC7\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003e        •  Dimensions: 12.57“W x 4.21“H (with knobs) x 5.24“D\u003c\/p\u003e\n\u003cp\u003e        •  Weight: 3.5 lbs.\u003c\/p\u003e\n\u003cp\u003e        •  Power Consumption: 2.8W\u003c\/p\u003e\n\u003cp\u003e        •  Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A\u003c\/p\u003e\n\u003cp\u003e        •  Patchbay: 32x 3.5mm jacks\u003c\/p\u003e\n\u003cp\u003e        • Rear Panel Audio Out: ¼” Headphone \/ Audio\u003c\/p\u003e\n\u003cp\u003eEURORACK SPECS\u003c\/p\u003e\n\u003cp\u003e        • Current Draw: 230mA (+12V – from 10-pin header)\u003c\/p\u003e\n\u003cp\u003e        •  Mounting Dims: 60HP (.69” 26mm Module Depth)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-14T18:11:00+02:00","created_at":"2016-11-14T18:17:43+02:00","vendor":"Moog","type":"Semi Modular","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$500 to $750","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":59900,"price_min":59900,"price_max":59900,"available":true,"price_varies":false,"compare_at_price":67900,"compare_at_price_min":67900,"compare_at_price_max":67900,"compare_at_price_varies":false,"variants":[{"id":28501270605,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-MOTHER-32-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Mother-32","public_title":null,"options":["Default Title"],"price":59900,"weight":0,"compare_at_price":67900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"094922033031"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Mother_32_Angled_Black_Med.jpg?v=1479140315","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Mother_32_Front_Black.png?v=1479140335","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Mother_32_back_black.png?v=1479140356","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Panel_Patched.jpg?v=1479220755"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Mother_32_Angled_Black_Med.jpg?v=1479140315","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/mother-32\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003e32 | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/mother-32\"\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration.\u003c\/p\u003e\n\u003cp\u003eMother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.\u003c\/p\u003e\n\u003cp\u003e• Semi-Modular design requires no patching for swift, inspired music creation\u003c\/p\u003e\n\u003cp\u003e• Voltage Controlled 32 Step Sequencer with 64 Sequence Locations\u003c\/p\u003e\n\u003cp\u003e• Low Pass \u0026amp; High Pass Moog Ladder Filter (20Hz–20kHz) with voltage controlled resonance\u003c\/p\u003e\n\u003cp\u003e• External audio input for processing outside sound sources\u003c\/p\u003e\n\u003cp\u003e• Definitive Moog oscillator with Pulse and Sawtooth wave outputs\u003c\/p\u003e\n\u003cp\u003e• 5-pin MIDI input and MIDI to CV converter\u003c\/p\u003e\n\u003cp\u003e• 32 Modular Patch Points (Includes 5 patch cables)\u003c\/p\u003e\n\u003cp\u003e• 2 Voltage controlled mixers\u003c\/p\u003e\n\u003cp\u003e• Superb companion to Werkstatt 01, Minitaur and other synthesizers\u003c\/p\u003e\n\u003cp\u003e• Main module can be easily transferred into a Eurorack skiff or case\u003c\/p\u003e\n\u003cp\u003e• Mount 2 or 3 units vertically with optional 2 and 3 Tier kits\u003c\/p\u003e\n\u003cp\u003e• Complete solution for new Eurorack users – no other items required\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specs-tab\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eVOLTAGE CONTROLLED OSCILLATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle VCO with simultaneous Sawtooth and Pulse wave Outputs (+\/-5V)\u003c\/li\u003e\n\u003cli\u003e1 V\/Octave from 8Hz to 8KHz (16KHz max with LFO\/CV)\u003c\/li\u003e\n\u003cli\u003ePanel Frequency control (+\/-1 Octave)\u003c\/li\u003e\n\u003cli\u003eToggle Selector for waveform routed to the mixer\u003c\/li\u003e\n\u003cli\u003ePulse Width control\u003c\/li\u003e\n\u003cli\u003eLinear FM and 1V\/Octave Exponential FM inputs (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOISE\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput normalled to Ext Audio input\u003c\/li\u003e\n\u003cli\u003eWhite Noise output (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED MIXER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrossfades between selected VCO waveform and Ext Audio input (normalled to White Noise)\u003c\/li\u003e\n\u003cli\u003eMix CV input (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED FILTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20Hz to 20KHz switchable Low Pass\/High Pass 4-pole Transistor Ladder Filter with voltage controlled Resonance\u003c\/li\u003e\n\u003cli\u003eVCF Cutoff input (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eVCF Resonance input (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eVCF Output (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED AMPLIFIER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable CV Source: EG or ON (drone)\u003c\/li\u003e\n\u003cli\u003eVCA CV input (0 to +8V in EG mode and +\/-5V in ON mode, summed with signals from ON\/EG switch)    \u003c\/li\u003e\n\u003cli\u003eOutput Volume Control (VCA Out and Line\/Headphone Out)\u003c\/li\u003e\n\u003cli\u003eVCA output (+\/-5V) and rear panel 1\/4\" Headphone\/Audio Output (+\/-1.7V peak)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLOW FREQUENCY OSCILLATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSquare wave output (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eTriangle wave output (+\/-5V)\u003c\/li\u003e\n\u003cli\u003eSelectable waveshape to VCO and VCF MOD sections\u003c\/li\u003e\n\u003cli\u003ePanel Rate control .1Hz to 350Hz  (600Hz max)\u003c\/li\u003e\n\u003cli\u003eLFO Rate CV input (+\/-5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eENVELOPE GENERATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable controls for Attack and Decay\u003c\/li\u003e\n\u003cli\u003eSustain ON\/OFF for single-trigger (ASD) or multi-trigger (AD) behavior\u003c\/li\u003e\n\u003cli\u003eExternal Gate input (0 to +5V; Tolerant of 10V gates)\u003c\/li\u003e\n\u003cli\u003eEG output (0 to +7.5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVCO MODULATION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable Source: EG\/VCO MOD or LFO (EG normalled to VCO MOD in)\u003c\/li\u003e\n\u003cli\u003eVCO Mod input (normalled to EG\/VCO MOD switch position)\u003c\/li\u003e\n\u003cli\u003eVariable Modulation Amount control\u003c\/li\u003e\n\u003cli\u003eSelectable Modulation Destination: VCO Pitch or PWM (PWM summed with Pulse Width panel control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVCF MODULATION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelectable Source: EG or LFO\u003c\/li\u003e\n\u003cli\u003eVariable Modulation Amount control\u003c\/li\u003e\n\u003cli\u003eSelectable VCF Modulation Polarity (+\/-)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVOLTAGE CONTROLLED MIXER\/ATTENUATOR\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage controlled crossfade\/mix circuit for mixing two DC coupled signals\u003c\/li\u003e\n\u003cli\u003eMix 1 Input (Normalled to ground)\u003c\/li\u003e\n\u003cli\u003eMix 2 Input (Normalled to +5V)\u003c\/li\u003e\n\u003cli\u003eMix Control CV input (-5V to +5V)\u003c\/li\u003e\n\u003cli\u003eMix Output: Un-inverted output (-5 to +5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMULTIPLE\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x input 2x output signal multiplier\u003c\/li\u003e\n\u003cli\u003eMult Input: Buffered signal\u003c\/li\u003e\n\u003cli\u003eMult Outputs: 1 and 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKEYBOARD\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle octave 13-note keyboard (In Step Edit Mode this is used to select, mute and enable sequencer steps.)\u003c\/li\u003e\n\u003cli\u003eOctave Up\/Down buttons select from 8 available octave settings\u003c\/li\u003e\n\u003cli\u003eGlide Time control\u003c\/li\u003e\n\u003cli\u003eKB CV output (-5 to +5V)\u003c\/li\u003e\n\u003cli\u003eGate Output  (0 to +5V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSEQUENCER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-mode 32 step sequencer with 64 sequence locations\u003c\/li\u003e\n\u003cli\u003ePerformance Modes:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e-     In KB Mode, the Keyboard is used to play the instrument, enter sequence data and transpose sequences.\u003c\/p\u003e\n\u003cp\u003e-     In Step Mode, the keyboard functions as the step sequencer interface and is used to enable and mute steps, update note data and select sequence banks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach sequence step includes: Note Value, Gate Length (Tie), Rest On\/Off, Accent On\/Off, Glide On\/Off and Ratchet count (up to 4 note-repeats occurring in the duration of a single note)\u003c\/li\u003e\n\u003cli\u003eSequencer Panel Controls: Tempo, Swing, Run\/Stop, Hold, and Reset\u003c\/li\u003e\n\u003cli\u003eSequencer Control Inputs: Tempo, Run\/Stop (also used for sync), Reset and Hold\u003c\/li\u003e\n\u003cli\u003eSequencer Control Outputs: KB, Gate, Accent Pulse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePATCHBAY\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe patchbay contains 32 patch points (3.5mm)\u003c\/li\u003e\n\u003cli\u003eAvailable Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V\/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, Mix 2, VC Mix Control, Mult, Gate, Tempo, Run\/Stop, Reset and Hold\u003c\/li\u003e\n\u003cli\u003eAvailable Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB, Gate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eASSIGNABLE OUTPUT\u003c\/p\u003e\n\u003cp\u003e        • Multipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock \/2 Sequencer Clock \/4, Decimated \"Ramp”,                   Decimated \"Saw”, Decimated \"Triangle”, Stepped Random, STEP 1, MIDI Note On Velocity, MIDI Channel Aftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2,                 MIDI CC4 and MIDI CC7\u003c\/p\u003e\n\u003cp\u003eSPECS\u003c\/p\u003e\n\u003cp\u003e        •  Dimensions: 12.57“W x 4.21“H (with knobs) x 5.24“D\u003c\/p\u003e\n\u003cp\u003e        •  Weight: 3.5 lbs.\u003c\/p\u003e\n\u003cp\u003e        •  Power Consumption: 2.8W\u003c\/p\u003e\n\u003cp\u003e        •  Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A\u003c\/p\u003e\n\u003cp\u003e        •  Patchbay: 32x 3.5mm jacks\u003c\/p\u003e\n\u003cp\u003e        • Rear Panel Audio Out: ¼” Headphone \/ Audio\u003c\/p\u003e\n\u003cp\u003eEURORACK SPECS\u003c\/p\u003e\n\u003cp\u003e        • Current Draw: 230mA (+12V – from 10-pin header)\u003c\/p\u003e\n\u003cp\u003e        •  Mounting Dims: 60HP (.69” 26mm Module Depth)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog Mother-32

Moog Mother-32

$599.00

32 | Moog Music Inc The Moog Mother-32 is the first tabletop semi-modular synthesizer from Moog. It is a distinctive analog instrument that adds raw analog sound, sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive new live performance and production instrument is handcrafted in Asheville,...


More Info
Sale
Moog Moogfest 2014 Werkstatt Synth Kit
Moog Moogfest 2014 Werkstatt Synth Kit

Semi Modular

$199.00 $219.00
{"id":8462039117,"title":"Moog Moogfest 2014 Werkstatt Synth Kit","handle":"werkstatt-01","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/werkstatt-01-moogfest-2014-kit\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eWerkstatt-01 Moogfest 2014 Kit | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/werkstatt-01-moogfest-2014-kit\"\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Werkstatt-Ø1: Moogfest 2014 Kit is a patchable and compact, one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive “Engineering VIP” workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required version of the Werkstatt-Ø1: Moogfest 2014 Kit. Assembly is extremely simple: Any user can quickly build an analog synthesizer based on classic Moog circuits, and if desired, study the analog circuits. Werkstatt was created to be an educational tool, but it is also a formidable, compact analog synthesizer from Moog.\u003c\/p\u003e\n\u003cp\u003e Analog synthesizers have long had their own maker culture born of curious engineers, physicists and hobbyists who have created and crafted their sounds through electronic experimentation. It is our goal to share our love for learning, music, and electronics by encouraging everyone to create the world they want to hear, one mod at a time.\u003c\/p\u003e\n\u003cp\u003eWerkstatt-Ø1 is 100% US made\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specs-tab\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eOSCILLATOR SECTION\u003c\/p\u003e\n\u003cp\u003e• Single VCO w\/ frequency control (8Hz to 16KHz)\u003c\/p\u003e\n\u003cp\u003e• Saw and square waveshapes w\/ control for square pulse width\u003c\/p\u003e\n\u003cp\u003e• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w\/ Amount control\u003c\/p\u003e\n\u003cp\u003e• Ability to PWM the square wave\u003c\/p\u003e\n\u003cp\u003eFILTER SECTION\u003c\/p\u003e\n\u003cp\u003e• Classic 4-Pole Moog Ladder Filter w\/ Resonance control (20Hz-20KHz)\u003c\/p\u003e\n\u003cp\u003e• Select between the Envelope generator and LFO as Mod Source.\u003c\/p\u003e\n\u003cp\u003e• Polarity switch (+\/-) and amount  knob for control of filter cutoff modulation\u003c\/p\u003e\n\u003cp\u003eLFO SECTION\u003c\/p\u003e\n\u003cp\u003e• Selectable Square or Triangle waveshape w\/ rate control (2Hz-600Hz)\u003c\/p\u003e\n\u003cp\u003eVCA\/AMP SECTION\u003c\/p\u003e\n\u003cp\u003e• Select between the Envelope Generator or ON (Drone)\u003c\/p\u003e\n\u003cp\u003eENVELOPES SECTION\u003c\/p\u003e\n\u003cp\u003e• Controls for Attack \u0026amp; Decay time w\/ Sustain On\/Off switch\u003c\/p\u003e\n\u003cp\u003eKB SECTION\u003c\/p\u003e\n\u003cp\u003e• One octave low-note priority legato keyboard w\/ glide control\u003c\/p\u003e\n\u003cp\u003ePATCHBAY\u003c\/p\u003e\n\u003cp\u003e• VCA Input0V to +5V in VCA EG Mode, +\/-2.5V in VCA ON Mode\u003c\/p\u003e\n\u003cp\u003e• VCF Input-5V to +5\u003c\/p\u003e\n\u003cp\u003e• VCO LINEAR FM Input +\/-2.5V - NOTE: this is an inverting control input\u003c\/p\u003e\n\u003cp\u003e• VCO EXPONENTIAL FM Input -5V to +5V, 1V\/Octave trimmable\u003c\/p\u003e\n\u003cp\u003e• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel\u003c\/p\u003e\n\u003cp\u003e• VCF AUDIO InputUnbuffered\/Unmixed AC coupled input to VCF\u003c\/p\u003e\n\u003cp\u003e• 2x KB CV Output3V\/semitone from 1 keyboard - NOTE: Attenuate for 1V\/Octave\u003c\/p\u003e\n\u003cp\u003e• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority\u003c\/p\u003e\n\u003cp\u003e• 2x GATE Output0 to +5V signal generated from low-note priority\u003c\/p\u003e\n\u003cp\u003e• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator\u003c\/p\u003e\n\u003cp\u003e• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch\u003c\/p\u003e\n\u003cp\u003e• 2x VCF Output-2V to +2 V signal for audio or CV uses\u003c\/p\u003e\n\u003cp\u003e• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch\u003c\/p\u003e\n\u003cp\u003eRear Panel\u003c\/p\u003e\n\u003cp\u003e• AUDIO Output Nominal +\/-1.5V Signal\u003c\/p\u003e\n\u003cp\u003e• POWER+12VDC Center Positive w\/ 1.2A Wall transformer\u003c\/p\u003e\n\u003cp\u003e• POWER CONSUMPTION 1.8 Watt AVG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-19T15:58:00+02:00","created_at":"2016-11-19T15:59:15+02:00","vendor":"Moog","type":"Semi Modular","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$100 to $200","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":21900,"compare_at_price_min":21900,"compare_at_price_max":21900,"compare_at_price_varies":false,"variants":[{"id":28588906509,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WERKSTATT-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Moogfest 2014 Werkstatt Synth Kit","public_title":null,"options":["Default Title"],"price":19900,"weight":0,"compare_at_price":21900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"094922449986"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Werkstatt_01.jpg?v=1479564006","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/front_web.jpg?v=1479564021","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/angle_web.jpg?v=1479564034","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Werkstatt_20_02.jpg?v=1479564046","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Werkstatt_04.jpg?v=1479564071","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Werkstatt_03.jpg?v=1479564085","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/circuit_web.jpg?v=1479564101","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Enigineering12.jpg?v=1479564115","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Enigineering2.jpg?v=1479564131","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Enigineering1.jpg?v=1479564145"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Werkstatt_01.jpg?v=1479564006","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/werkstatt-01-moogfest-2014-kit\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eWerkstatt-01 Moogfest 2014 Kit | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/semi-modular\/werkstatt-01-moogfest-2014-kit\"\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Werkstatt-Ø1: Moogfest 2014 Kit is a patchable and compact, one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive “Engineering VIP” workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required version of the Werkstatt-Ø1: Moogfest 2014 Kit. Assembly is extremely simple: Any user can quickly build an analog synthesizer based on classic Moog circuits, and if desired, study the analog circuits. Werkstatt was created to be an educational tool, but it is also a formidable, compact analog synthesizer from Moog.\u003c\/p\u003e\n\u003cp\u003e Analog synthesizers have long had their own maker culture born of curious engineers, physicists and hobbyists who have created and crafted their sounds through electronic experimentation. It is our goal to share our love for learning, music, and electronics by encouraging everyone to create the world they want to hear, one mod at a time.\u003c\/p\u003e\n\u003cp\u003eWerkstatt-Ø1 is 100% US made\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"specs-tab\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eOSCILLATOR SECTION\u003c\/p\u003e\n\u003cp\u003e• Single VCO w\/ frequency control (8Hz to 16KHz)\u003c\/p\u003e\n\u003cp\u003e• Saw and square waveshapes w\/ control for square pulse width\u003c\/p\u003e\n\u003cp\u003e• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w\/ Amount control\u003c\/p\u003e\n\u003cp\u003e• Ability to PWM the square wave\u003c\/p\u003e\n\u003cp\u003eFILTER SECTION\u003c\/p\u003e\n\u003cp\u003e• Classic 4-Pole Moog Ladder Filter w\/ Resonance control (20Hz-20KHz)\u003c\/p\u003e\n\u003cp\u003e• Select between the Envelope generator and LFO as Mod Source.\u003c\/p\u003e\n\u003cp\u003e• Polarity switch (+\/-) and amount  knob for control of filter cutoff modulation\u003c\/p\u003e\n\u003cp\u003eLFO SECTION\u003c\/p\u003e\n\u003cp\u003e• Selectable Square or Triangle waveshape w\/ rate control (2Hz-600Hz)\u003c\/p\u003e\n\u003cp\u003eVCA\/AMP SECTION\u003c\/p\u003e\n\u003cp\u003e• Select between the Envelope Generator or ON (Drone)\u003c\/p\u003e\n\u003cp\u003eENVELOPES SECTION\u003c\/p\u003e\n\u003cp\u003e• Controls for Attack \u0026amp; Decay time w\/ Sustain On\/Off switch\u003c\/p\u003e\n\u003cp\u003eKB SECTION\u003c\/p\u003e\n\u003cp\u003e• One octave low-note priority legato keyboard w\/ glide control\u003c\/p\u003e\n\u003cp\u003ePATCHBAY\u003c\/p\u003e\n\u003cp\u003e• VCA Input0V to +5V in VCA EG Mode, +\/-2.5V in VCA ON Mode\u003c\/p\u003e\n\u003cp\u003e• VCF Input-5V to +5\u003c\/p\u003e\n\u003cp\u003e• VCO LINEAR FM Input +\/-2.5V - NOTE: this is an inverting control input\u003c\/p\u003e\n\u003cp\u003e• VCO EXPONENTIAL FM Input -5V to +5V, 1V\/Octave trimmable\u003c\/p\u003e\n\u003cp\u003e• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel\u003c\/p\u003e\n\u003cp\u003e• VCF AUDIO InputUnbuffered\/Unmixed AC coupled input to VCF\u003c\/p\u003e\n\u003cp\u003e• 2x KB CV Output3V\/semitone from 1 keyboard - NOTE: Attenuate for 1V\/Octave\u003c\/p\u003e\n\u003cp\u003e• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority\u003c\/p\u003e\n\u003cp\u003e• 2x GATE Output0 to +5V signal generated from low-note priority\u003c\/p\u003e\n\u003cp\u003e• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator\u003c\/p\u003e\n\u003cp\u003e• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch\u003c\/p\u003e\n\u003cp\u003e• 2x VCF Output-2V to +2 V signal for audio or CV uses\u003c\/p\u003e\n\u003cp\u003e• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch\u003c\/p\u003e\n\u003cp\u003eRear Panel\u003c\/p\u003e\n\u003cp\u003e• AUDIO Output Nominal +\/-1.5V Signal\u003c\/p\u003e\n\u003cp\u003e• POWER+12VDC Center Positive w\/ 1.2A Wall transformer\u003c\/p\u003e\n\u003cp\u003e• POWER CONSUMPTION 1.8 Watt AVG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog Moogfest 2014 Werkstatt Synth Kit

Moog Moogfest 2014 Werkstatt Synth Kit

$199.00

Werkstatt-01 Moogfest 2014 Kit | Moog Music Inc The Werkstatt-Ø1: Moogfest 2014 Kit is a patchable and compact, one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive “Engineering VIP” workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required ve...


More Info
Moog Minimoog Voyager XL

Minimoog Voyagers

$4,995.00
{"id":8442768269,"title":"Moog Minimoog Voyager XL","handle":"vy-min-0015","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/minimoog-voyagers\/minimoog-voyager-xl\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eMinimoog Voyager XL | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/minimoog-voyagers\/minimoog-voyager-xl\"\u003e\n\u003cp\u003eMinimoog Voyager XL\u003c\/p\u003e\n\u003cp\u003e100% Analog Sound Engine\u003c\/p\u003e\n\u003cp\u003eThe MINIMOOG VOYAGER XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.\u003c\/p\u003e\n\u003cp\u003eKeyboard\u003c\/p\u003e\n\u003cp\u003e61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.\u003c\/p\u003e\n\u003cp\u003eRibbon Controller\u003c\/p\u003e\n\u003cp\u003eA 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).\u003c\/p\u003e\n\u003cp\u003e(20) Control Voltage output\u003c\/p\u003e\n\u003cp\u003e- Keyboard Pitch (w\/ internal trim to calibrate to 1 V\/Octave)\u003c\/p\u003e\n\u003cbr\u003e - Keyboard Velocity\u003cbr\u003e - Keyboard Afterpressure\u003cbr\u003e - Touch Surface X\u003cbr\u003e - Touch Surface Y\u003cbr\u003e - Touch Surface A (area)\u003cbr\u003e - Pitch Bend Wheel\u003cbr\u003e - Mod Wheel\u003cbr\u003e - MOD 1 signal (signal at MOD 1 input)\u003cbr\u003e - MOD 2 signal (signal at MOD 2 input)\u003cbr\u003e - LFO triangle wave\u003cbr\u003e - LFO square wave\u003cbr\u003e - Mod Wheel Mod Buss output\u003cbr\u003e - Pedal\/On Mod Buss output\u003cbr\u003e - Filter Envelope\u003cbr\u003e - Volume envelope\u003cbr\u003e - Sample and Hold Step\u003cbr\u003e - Sample and Hold Smooth\u003cbr\u003e - Noise\u003cbr\u003e - Ribbon Controller CV Output (-5V to +5V)\n\u003cp\u003e(3) Gate outputs\u003c\/p\u003e\n\u003cp\u003e- Keyboard Gate\u003c\/p\u003e\n\u003cbr\u003e - Touch Surface Gate\u003cbr\u003e - Ribbon Controller Gate Output\n\u003cp\u003e(3) 4-way Mults (top jack is ring-powered)\u003c\/p\u003e\n\u003cp\u003e(10) Control Voltage Inputs\u003c\/p\u003e\n\u003cp\u003e- Envelope Rate CV (-5V to +5V) Ring-Powered\u003c\/p\u003e\n\u003cbr\u003e - OSC Pitch CV (adj. to 1V\/Octave) (-5V to +5V) Ring-Powered\u003cbr\u003e - OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered\u003cbr\u003e - FILTER Cutoff CV (-5V to +5V) Ring-Powered\u003cbr\u003e - VCA Volume CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - VCA Pan CV (-2.5V to +2.5V) Ring-Powered\u003cbr\u003e - LFO Rate CV (-5V to +5V) Ring-Powered\u003cbr\u003e - MOD Mod1 CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - MOD Mod2 CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - S\u0026amp;H CV (-5V to +5V) Ring-Powered\n\u003cp\u003e(4) Gate Inputs\u003c\/p\u003e\n\u003cp\u003e- ENV Release ON\/OFF (0V OFF, +5V ON)\u003c\/p\u003e\n\u003cbr\u003e - ENV Gate Input (0V OFF, +5V ON)\u003cbr\u003e - LFO Sync ON\/OFF (0V OFF, +5V ON)\u003cbr\u003e - S\u0026amp;H Gate Input (0V OFF, +5V ON) No footswitch input\n\u003cp\u003e(2) Active Attenuators\u003c\/p\u003e\n\u003cp\u003eActive Attenuators are identical to the VX-352 attenuators with the following difference:\u003c\/p\u003e\n\u003cp\u003eCHANNEL 1 is normalled to LFO 2 output. So, if nothing is connected to the Channel 1 input jack, the output of Channel 1 will be the attenuated version of the LFO 2 output.\u003c\/p\u003e\n\u003cp\u003eCHANNEL 2 is normalled to RIBBON output. So, if nothing is connected to the Channel 2 input jack, the output of Channel 2 will be the attenuated version of the RIBBON controller.\u003c\/p\u003e\n\u003cp\u003eEXPRESSION PEDALS can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).\u003c\/p\u003e\n\u003cp\u003eAMOUNT controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.\u003c\/p\u003e\n\u003cp\u003eOFFSET control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +\/-10V.\u003c\/p\u003e\n\u003cp\u003eFour-Input Mixer\u003c\/p\u003e\n\u003cp\u003e- Inputs 1 and 2 can be attenuated via front-panel knobs\u003c\/p\u003e\n\u003cbr\u003e - Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)\u003cbr\u003e - Two output CV's (+) and (-)\u003cbr\u003e - DC offset can be added to signal via OFFSET knob\u003cbr\u003e - Overall output of MIXER can be adjusted via the MASTER knob\n\u003cp\u003eLag Processor\u003c\/p\u003e\n\u003cp\u003eRISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).\u003c\/p\u003e\n\u003cp\u003eLFO 2\u003c\/p\u003e\n\u003cp\u003eA MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.\u003c\/p\u003e\n\u003cp\u003eINPUTS: LFO 2 can be\u003c\/p\u003e\n\u003cp\u003e- Free-running (adjusted by the RATE knob on the front panel)\u003c\/p\u003e\n\u003cbr\u003e - MIDI SYNC from external MIDI clock\u003cbr\u003e - Directly CLOCKED from a GATE CV via the front panel CLOCK jack\u003cbr\u003e - Controlled via external CV or Expression Pedal via the front panel RATE CV jack\n\u003cp\u003eOUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.\u003c\/p\u003e\n\u003cp\u003eWAVEFORMS\u003c\/p\u003e\n\u003cp\u003eAvailable front-panel waveforms:\u003c\/p\u003e\n\u003cp\u003e- TRIANGLE\u003c\/p\u003e\n\u003cbr\u003e - SQUARE\u003cbr\u003e - RAMP\u003cbr\u003e - SAW\u003cbr\u003e - S\u0026amp;H\u003cbr\u003e - S\u0026amp;H SMOOTH\n\u003cp\u003ePower\u003c\/p\u003e\n\u003cp\u003ePower input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e12V Lamp\u003cbr\u003eThe TNC Lamp Socket provides 12VDC for a gooseneck lamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-14T21:22:00+02:00","created_at":"2016-11-14T21:23:31+02:00","vendor":"Moog","type":"Minimoog Voyagers","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$3000 and Over","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":499500,"price_min":499500,"price_max":499500,"available":true,"price_varies":false,"compare_at_price":499500,"compare_at_price_min":499500,"compare_at_price_max":499500,"compare_at_price_varies":false,"variants":[{"id":28503042765,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"VY-MIN-0015","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog Minimoog Voyager XL","public_title":null,"options":["Default Title"],"price":499500,"weight":0,"compare_at_price":499500,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"094922042804"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_frontangle.jpg?v=1479151438","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_back_0.jpg?v=1479151458","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_logo_copper.jpg?v=1479151475","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_patchbat_0.jpg?v=1479151719","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_ribbon_0.jpg?v=1479151736","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Black_20XL1.jpg?v=1479151763","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Black_20XL4.jpg?v=1479151777"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/minimoog_voyager_20xl_frontangle.jpg?v=1479151438","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/minimoog-voyagers\/minimoog-voyager-xl\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eMinimoog Voyager XL | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/minimoog-voyagers\/minimoog-voyager-xl\"\u003e\n\u003cp\u003eMinimoog Voyager XL\u003c\/p\u003e\n\u003cp\u003e100% Analog Sound Engine\u003c\/p\u003e\n\u003cp\u003eThe MINIMOOG VOYAGER XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.\u003c\/p\u003e\n\u003cp\u003eKeyboard\u003c\/p\u003e\n\u003cp\u003e61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.\u003c\/p\u003e\n\u003cp\u003eRibbon Controller\u003c\/p\u003e\n\u003cp\u003eA 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).\u003c\/p\u003e\n\u003cp\u003e(20) Control Voltage output\u003c\/p\u003e\n\u003cp\u003e- Keyboard Pitch (w\/ internal trim to calibrate to 1 V\/Octave)\u003c\/p\u003e\n\u003cbr\u003e - Keyboard Velocity\u003cbr\u003e - Keyboard Afterpressure\u003cbr\u003e - Touch Surface X\u003cbr\u003e - Touch Surface Y\u003cbr\u003e - Touch Surface A (area)\u003cbr\u003e - Pitch Bend Wheel\u003cbr\u003e - Mod Wheel\u003cbr\u003e - MOD 1 signal (signal at MOD 1 input)\u003cbr\u003e - MOD 2 signal (signal at MOD 2 input)\u003cbr\u003e - LFO triangle wave\u003cbr\u003e - LFO square wave\u003cbr\u003e - Mod Wheel Mod Buss output\u003cbr\u003e - Pedal\/On Mod Buss output\u003cbr\u003e - Filter Envelope\u003cbr\u003e - Volume envelope\u003cbr\u003e - Sample and Hold Step\u003cbr\u003e - Sample and Hold Smooth\u003cbr\u003e - Noise\u003cbr\u003e - Ribbon Controller CV Output (-5V to +5V)\n\u003cp\u003e(3) Gate outputs\u003c\/p\u003e\n\u003cp\u003e- Keyboard Gate\u003c\/p\u003e\n\u003cbr\u003e - Touch Surface Gate\u003cbr\u003e - Ribbon Controller Gate Output\n\u003cp\u003e(3) 4-way Mults (top jack is ring-powered)\u003c\/p\u003e\n\u003cp\u003e(10) Control Voltage Inputs\u003c\/p\u003e\n\u003cp\u003e- Envelope Rate CV (-5V to +5V) Ring-Powered\u003c\/p\u003e\n\u003cbr\u003e - OSC Pitch CV (adj. to 1V\/Octave) (-5V to +5V) Ring-Powered\u003cbr\u003e - OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered\u003cbr\u003e - FILTER Cutoff CV (-5V to +5V) Ring-Powered\u003cbr\u003e - VCA Volume CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - VCA Pan CV (-2.5V to +2.5V) Ring-Powered\u003cbr\u003e - LFO Rate CV (-5V to +5V) Ring-Powered\u003cbr\u003e - MOD Mod1 CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - MOD Mod2 CV ( 0V to +5V) Ring-Powered\u003cbr\u003e - S\u0026amp;H CV (-5V to +5V) Ring-Powered\n\u003cp\u003e(4) Gate Inputs\u003c\/p\u003e\n\u003cp\u003e- ENV Release ON\/OFF (0V OFF, +5V ON)\u003c\/p\u003e\n\u003cbr\u003e - ENV Gate Input (0V OFF, +5V ON)\u003cbr\u003e - LFO Sync ON\/OFF (0V OFF, +5V ON)\u003cbr\u003e - S\u0026amp;H Gate Input (0V OFF, +5V ON) No footswitch input\n\u003cp\u003e(2) Active Attenuators\u003c\/p\u003e\n\u003cp\u003eActive Attenuators are identical to the VX-352 attenuators with the following difference:\u003c\/p\u003e\n\u003cp\u003eCHANNEL 1 is normalled to LFO 2 output. So, if nothing is connected to the Channel 1 input jack, the output of Channel 1 will be the attenuated version of the LFO 2 output.\u003c\/p\u003e\n\u003cp\u003eCHANNEL 2 is normalled to RIBBON output. So, if nothing is connected to the Channel 2 input jack, the output of Channel 2 will be the attenuated version of the RIBBON controller.\u003c\/p\u003e\n\u003cp\u003eEXPRESSION PEDALS can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).\u003c\/p\u003e\n\u003cp\u003eAMOUNT controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.\u003c\/p\u003e\n\u003cp\u003eOFFSET control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +\/-10V.\u003c\/p\u003e\n\u003cp\u003eFour-Input Mixer\u003c\/p\u003e\n\u003cp\u003e- Inputs 1 and 2 can be attenuated via front-panel knobs\u003c\/p\u003e\n\u003cbr\u003e - Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)\u003cbr\u003e - Two output CV's (+) and (-)\u003cbr\u003e - DC offset can be added to signal via OFFSET knob\u003cbr\u003e - Overall output of MIXER can be adjusted via the MASTER knob\n\u003cp\u003eLag Processor\u003c\/p\u003e\n\u003cp\u003eRISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).\u003c\/p\u003e\n\u003cp\u003eLFO 2\u003c\/p\u003e\n\u003cp\u003eA MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.\u003c\/p\u003e\n\u003cp\u003eINPUTS: LFO 2 can be\u003c\/p\u003e\n\u003cp\u003e- Free-running (adjusted by the RATE knob on the front panel)\u003c\/p\u003e\n\u003cbr\u003e - MIDI SYNC from external MIDI clock\u003cbr\u003e - Directly CLOCKED from a GATE CV via the front panel CLOCK jack\u003cbr\u003e - Controlled via external CV or Expression Pedal via the front panel RATE CV jack\n\u003cp\u003eOUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.\u003c\/p\u003e\n\u003cp\u003eWAVEFORMS\u003c\/p\u003e\n\u003cp\u003eAvailable front-panel waveforms:\u003c\/p\u003e\n\u003cp\u003e- TRIANGLE\u003c\/p\u003e\n\u003cbr\u003e - SQUARE\u003cbr\u003e - RAMP\u003cbr\u003e - SAW\u003cbr\u003e - S\u0026amp;H\u003cbr\u003e - S\u0026amp;H SMOOTH\n\u003cp\u003ePower\u003c\/p\u003e\n\u003cp\u003ePower input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e12V Lamp\u003cbr\u003eThe TNC Lamp Socket provides 12VDC for a gooseneck lamp.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog Minimoog Voyager XL

Moog Minimoog Voyager XL

$4,995.00

Minimoog Voyager XL | Moog Music Inc Minimoog Voyager XL 100% Analog Sound Engine The MINIMOOG VOYAGER XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, w...


More Info
Sale
Moog MiniMoog Model D
Moog MiniMoog Model D

Minimoog

$3,499.00 $3,749.00
{"id":8445084813,"title":"Moog MiniMoog Model D","handle":"minimoog-model-d","description":"\u003cp\u003eIt's called a Minimoog for a reason. The original, wear it proud.\u003c\/p\u003e\n\u003cp\u003eOur synths are handmade in Asheville, NC and now our shirts are as well. 100% Domestically grown organic combed cotton. Cut, sewn and printed down the street from the Moog factory in downtown Asheville, NC by Spiritex\/Gallery MIA.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSuper soft material, that gets softer with each wash. We use only phthalate \u0026amp; PVC free, water based ink.\u003c\/p\u003e","published_at":"2016-11-15T14:06:00+02:00","created_at":"2016-11-15T14:08:19+02:00","vendor":"Moog","type":"Minimoog","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$3000 and Over","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":349900,"price_min":349900,"price_max":349900,"available":true,"price_varies":false,"compare_at_price":374900,"compare_at_price_min":374900,"compare_at_price_max":374900,"compare_at_price_varies":false,"variants":[{"id":28515348877,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MIN-MOOG-D-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog MiniMoog Model D","public_title":null,"options":["Default Title"],"price":349900,"weight":0,"compare_at_price":374900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232320170"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Minimoog_Model_D_angle.jpg?v=1504966761","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/model_D_front.jpg?v=1504966761","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/model_D_back.jpg?v=1504966761"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Minimoog_Model_D_angle.jpg?v=1504966761","options":["Title"],"content":"\u003cp\u003eIt's called a Minimoog for a reason. The original, wear it proud.\u003c\/p\u003e\n\u003cp\u003eOur synths are handmade in Asheville, NC and now our shirts are as well. 100% Domestically grown organic combed cotton. Cut, sewn and printed down the street from the Moog factory in downtown Asheville, NC by Spiritex\/Gallery MIA.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSuper soft material, that gets softer with each wash. We use only phthalate \u0026amp; PVC free, water based ink.\u003c\/p\u003e"}
Moog MiniMoog Model D

Moog MiniMoog Model D

$3,499.00

It's called a Minimoog for a reason. The original, wear it proud. Our synths are handmade in Asheville, NC and now our shirts are as well. 100% Domestically grown organic combed cotton. Cut, sewn and printed down the street from the Moog factory in downtown Asheville, NC by Spiritex/Gallery MIA. Super soft material, that gets softer with each wa...


More Info
Sale
Moog CP-251 Moogerfooger Control Processor
Moog CP-251 Moogerfooger Control Processor

Controllers

$385.00 $399.00
{"id":8445157965,"title":"Moog CP-251 Moogerfooger Control Processor","handle":"cp-251","description":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/controllers\/cp-251-moogerfooger-control-processor\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eCP-251 Moogerfooger Control Processor | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/controllers\/cp-251-moogerfooger-control-processor\"\u003e\n\u003cp\u003eThe CP-251 Control Processor can be used in connection with one or more Moogerfooger analog effects modules, the Minimoog Voyager, or other voltage-controlled gear. The CP-251 adds the same kind of power and versatility of the classic MOOG modular synthesizers.\u003c\/p\u003e\n\u003cp\u003eThere are two kinds of signals in a modular analog synthesizer: audio and control. As audio signals go through a system of synthesizer modules, they get shaped into the sounds that you hear. Control signals, on the other hand, correspond to the variations in the sound that are imparted by the synthesizer modules, like invisible hands that turn the knobs of the modules.\u003c\/p\u003e\n\u003cp\u003eThe CP-251 provides a dual waveform LFO, Noise Generator, Sample-and-Hold circuit, as well as two attenuators, a lag processor, a CV mixer and a 4-way mult. This gives you ways to modify, mix, and distribute control voltages to produce the incredible variety of sounds and effects that analog synthesizers are famous for.\u003c\/p\u003e\n\u003cp\u003ePower Supply is included for use with 110 VAC.\u003c\/p\u003e\n\u003cp\u003e  SPECS:\u003c\/p\u003e\n\u003cp\u003e• FOUR INPUT MIXER - Enables you to combine control signals to create complex effects.\u003cbr\u003e • LAG PROCESSOR - Reshapes control signals by slowing down abrupt changes, used to produce glides and swoops.\u003cbr\u003e • LOW FREQUENCY OSCILLATOR (LFO) - Makes periodic control signals over the range of one cycle every five seconds to 50 cycles per second. The LFO is itself voltage-controlled so you can vary its rate with an expression pedal or other control signal to create effects such as vibrato, warbles, and sirens.\u003cbr\u003e • Two ATTENUATORS - To reduce the strength of control signals, enabling you to adjust the strength of an effect.\u003cbr\u003e • FOUR-WAY MULTIPLE - Enables you to send one control signal to as many as three destinations.\u003cbr\u003e • NOISE SOURCE - Provides pure noise for use as an audio or control signal.\u003cbr\u003e • SAMPLE AND HOLD - Produces stepwise control signals by sampling the voltage of any signal at rate of the LFO to produce classic sample-and-hold effects. This circuit also has a second output which is a smoothed version of the stepwise output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-15T14:56:00+02:00","created_at":"2016-11-15T14:58:41+02:00","vendor":"Moog","type":"Controllers","tags":["Keyboards \u0026 Synthesizers","Moog","Price Range_$300 to $500","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":38500,"price_min":38500,"price_max":38500,"available":true,"price_varies":false,"compare_at_price":39900,"compare_at_price_min":39900,"compare_at_price_max":39900,"compare_at_price_varies":false,"variants":[{"id":28515616141,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CP-251","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog CP-251 Moogerfooger Control Processor","public_title":null,"options":["Default Title"],"price":38500,"weight":0,"compare_at_price":39900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"094922033086"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/moogerfooger_cp-251_control_20processor.jpg?v=1479214813"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/moogerfooger_cp-251_control_20processor.jpg?v=1479214813","options":["Title"],"content":"\u003cdiv id=\"container\"\u003e\n\u003cdiv id=\"reader-header\" dir=\"ltr\"\u003e\n\u003ca id=\"reader-domain\" href=\"https:\/\/www.moogmusic.com\/products\/controllers\/cp-251-moogerfooger-control-processor\"\u003e\u003c\/a\u003e\n\u003ch1 id=\"reader-title\"\u003eCP-251 Moogerfooger Control Processor | Moog Music Inc\u003c\/h1\u003e\n\u003cdiv id=\"reader-credits\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"moz-reader-content\" dir=\"ltr\"\u003e\n\u003cdiv id=\"readability-page-1\" xml:base=\"https:\/\/www.moogmusic.com\/products\/controllers\/cp-251-moogerfooger-control-processor\"\u003e\n\u003cp\u003eThe CP-251 Control Processor can be used in connection with one or more Moogerfooger analog effects modules, the Minimoog Voyager, or other voltage-controlled gear. The CP-251 adds the same kind of power and versatility of the classic MOOG modular synthesizers.\u003c\/p\u003e\n\u003cp\u003eThere are two kinds of signals in a modular analog synthesizer: audio and control. As audio signals go through a system of synthesizer modules, they get shaped into the sounds that you hear. Control signals, on the other hand, correspond to the variations in the sound that are imparted by the synthesizer modules, like invisible hands that turn the knobs of the modules.\u003c\/p\u003e\n\u003cp\u003eThe CP-251 provides a dual waveform LFO, Noise Generator, Sample-and-Hold circuit, as well as two attenuators, a lag processor, a CV mixer and a 4-way mult. This gives you ways to modify, mix, and distribute control voltages to produce the incredible variety of sounds and effects that analog synthesizers are famous for.\u003c\/p\u003e\n\u003cp\u003ePower Supply is included for use with 110 VAC.\u003c\/p\u003e\n\u003cp\u003e  SPECS:\u003c\/p\u003e\n\u003cp\u003e• FOUR INPUT MIXER - Enables you to combine control signals to create complex effects.\u003cbr\u003e • LAG PROCESSOR - Reshapes control signals by slowing down abrupt changes, used to produce glides and swoops.\u003cbr\u003e • LOW FREQUENCY OSCILLATOR (LFO) - Makes periodic control signals over the range of one cycle every five seconds to 50 cycles per second. The LFO is itself voltage-controlled so you can vary its rate with an expression pedal or other control signal to create effects such as vibrato, warbles, and sirens.\u003cbr\u003e • Two ATTENUATORS - To reduce the strength of control signals, enabling you to adjust the strength of an effect.\u003cbr\u003e • FOUR-WAY MULTIPLE - Enables you to send one control signal to as many as three destinations.\u003cbr\u003e • NOISE SOURCE - Provides pure noise for use as an audio or control signal.\u003cbr\u003e • SAMPLE AND HOLD - Produces stepwise control signals by sampling the voltage of any signal at rate of the LFO to produce classic sample-and-hold effects. This circuit also has a second output which is a smoothed version of the stepwise output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog CP-251 Moogerfooger Control Processor

Moog CP-251 Moogerfooger Control Processor

$385.00

CP-251 Moogerfooger Control Processor | Moog Music Inc The CP-251 Control Processor can be used in connection with one or more Moogerfooger analog effects modules, the Minimoog Voyager, or other voltage-controlled gear. The CP-251 adds the same kind of power and versatility of the classic MOOG modular synthesizers. There are two kinds of...


More Info
{"id":8442440077,"title":"Moog 953 Duophonic 61 Note Keyboard - Walnut cabinet","handle":"mod-kbd-01","description":"\u003cdiv class=\"content shortDescription\"\u003e \u003cspan color=\"#ffffff\"\u003eThe Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers. \u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• 61 Keys\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Duophonic keyboard \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Scale 1 and Scale 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• On\/OFF switches for Glide 1 and Glide 2 \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Portamento controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Gated Glide On\/Off switch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Selectable Glide Type (Linear Constant Rate or Exponential)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Removable barrel connector for easy storage and replacement\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Walnut finish or Black finish\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-14T18:20:00+02:00","created_at":"2016-11-14T18:23:25+02:00","vendor":"Moog","type":"Synthesizers","tags":["Keyboards \u0026 Synthesizers","Modulars","Moog","Price Range_$1000 to $1500","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":109900,"price_min":109900,"price_max":109900,"available":true,"price_varies":false,"compare_at_price":109900,"compare_at_price_min":109900,"compare_at_price_max":109900,"compare_at_price_varies":false,"variants":[{"id":28501306189,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-KBD-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog 953 Duophonic 61 Note Keyboard - Walnut cabinet","public_title":null,"options":["Default Title"],"price":109900,"weight":0,"compare_at_price":109900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232216633"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/MOD-KBD-01_blk_0.jpg?v=1479140627","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Modular_20keyboard_20black_20blk.jpg?v=1479140645","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/controls_20detail.jpg?v=1479140663"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/MOD-KBD-01_blk_0.jpg?v=1479140627","options":["Title"],"content":"\u003cdiv class=\"content shortDescription\"\u003e \u003cspan color=\"#ffffff\"\u003eThe Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers. \u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• 61 Keys\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Duophonic keyboard \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Scale 1 and Scale 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• On\/OFF switches for Glide 1 and Glide 2 \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Portamento controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Gated Glide On\/Off switch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Selectable Glide Type (Linear Constant Rate or Exponential)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Removable barrel connector for easy storage and replacement\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Walnut finish or Black finish\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog 953 Duophonic 61 Note Keyboard - Walnut cabinet

Moog 953 Duophonic 61 Note Keyboard - Walnut cabinet

$1,099.00

 The Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers.    • 61 Keys • Duophonic keyboard  • Dedicated controls for Range 1 and Range 2 • Dedicated controls for Scale 1 and Scale 2 • On/OFF switches for Gli...


More Info
{"id":8442491533,"title":"Moog 953 Duophonic 61 Note Keyboard - Black cabinet","handle":"mod-kbd-02","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003eThe Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• 61 Keys\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Duophonic keyboard \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Scale 1 and Scale 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• On\/OFF switches for Glide 1 and Glide 2 \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Portamento controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Gated Glide On\/Off switch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Selectable Glide Type (Linear Constant Rate or Exponential)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Removable barrel connector for easy storage and replacement\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Walnut finish or Black finish\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2016-11-14T18:49:00+02:00","created_at":"2016-11-14T18:50:47+02:00","vendor":"Moog","type":"Synthesizers","tags":["Keyboards \u0026 Synthesizers","Modulars","Moog","Price Range_$1000 to $1500","Shop by brand_Moog","Shop by category_Synthesizers","Synthesizers"],"price":109900,"price_min":109900,"price_max":109900,"available":true,"price_varies":false,"compare_at_price":109900,"compare_at_price_min":109900,"compare_at_price_max":109900,"compare_at_price_varies":false,"variants":[{"id":28501478477,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MOD-KBD-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Moog 953 Duophonic 61 Note Keyboard - Black cabinet","public_title":null,"options":["Default Title"],"price":109900,"weight":0,"compare_at_price":109900,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"040232216640"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Modular_20keyboard_20black_20blk_a5796d49-9602-4ff4-b4d7-fd1f2df24f5c.jpg?v=1479142270","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/controls_20detail_59a3279b-f134-4926-8af5-76b6d4ae0ec4.jpg?v=1479142293","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/MOD-KBD-01_blk_0_aba60a98-48c3-4402-8d68-12f860d1f760.jpg?v=1479220213"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/Modular_20keyboard_20black_20blk_a5796d49-9602-4ff4-b4d7-fd1f2df24f5c.jpg?v=1479142270","options":["Title"],"content":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"info-tab\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003eThe Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• 61 Keys\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Duophonic keyboard \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Dedicated controls for Scale 1 and Scale 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• On\/OFF switches for Glide 1 and Glide 2 \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Portamento controls for Range 1 and Range 2\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Gated Glide On\/Off switch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Selectable Glide Type (Linear Constant Rate or Exponential)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Removable barrel connector for easy storage and replacement\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#ffffff\"\u003e• Walnut finish or Black finish\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Moog 953 Duophonic 61 Note Keyboard - Black cabinet

Moog 953 Duophonic 61 Note Keyboard - Black cabinet

$1,099.00

The Moog 953 is a 61 key duophonic keyboard designed for use with the Moog modular System 55, 35 and Model 15 analog synthesizers, as well as for use with vintage Moog modular synthesizers.    • 61 Keys • Duophonic keyboard  • Dedicated controls for Range 1 and Range 2 • Dedicated controls for Scale 1 and Scale 2 • On/OFF switches for Glid...


More Info