DPA d:mension™ Surround Kit with 5 x 4015A, Clips, Windscreens in Peli Case
DPA d:mension™ Surround Kit with 5 x 4015A, Clips, Windscreens in Peli Case

DPA d:mension™ Surround Kit with 5 x 4015A, Clips, Windscreens in Peli Case

Price
$7,442.89
Taxes and shipping calculated at checkout

Stock Notification

Get notified when this product is available again

Frequently Bought Together

Have a question?

5015A SURROUND KIT WITH FIVE d:dicate™ 4015A, CLIPS AND WINDSCREENS IN PELI™ CASE

 This is a complete Surround Kit with five carefully factory-matched d:dicate™ 4015 Wide Cardioid Microphones. Even though the standard tolerances on the d:dicate™ 4015 Wide Cardioid Microphones are extremely low, the surround match is even closer.
The specially selected d:dicate™ 4015 Wide Cardioid Microphones are matched within ±1 dB on both frequency response and sensitivity from mean of set.

Recording orchestras or other acoustic ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The natural response and dynamic range make this Surround Kit an obvious choice for precise tone quality and wide dynamic range. This is a great solution for AB, Decca Tree or surround main arrays like our Wide Cardioid Surround Array.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
 
Bundle deal

You save 500 EUR off the list price when you buy S5 Surround Mount along with this Matched Surround Kit. The deal also applies to:

d:mension™ 5006A Surround Kit with d:dicate™ 4006A Omnidirectional Microphones
d:mension™ 5006-11A Surround Kit with d:dicate™ 4006A Omnidirectional and 4011A Cardioid Microphones
 
Features

The product offers the following features
Wide pickup area and natural sound
Five carefully matched microphones
Ambience pickup with convenient directionality
Peli™ Case transportation and protection

Specifications
d:mension™ Surround Solutions 5015A SURROUND KIT WITH FIVE d:dicate™ 4015A, CLIPS AND WINDSCREENS IN PELI™ CASE

Directional patternWide cardioid
Principle of operationPressure gradient
Cartridge typePre-polarized condenser
Frequency range20 Hz - 20 kHz
Frequency range, ±2 dB, at 60 cm (23.6 in)40 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)Typ. 76 dB(A)
Total harmonic distortion (THD)< 1% up to 139 dB SPL peak
Dynamic rangeTyp. 121 dB
Max. SPL, peak before clipping159 dB
Switchable attenuator, filters etc.0 dB / -20 dB
Output impedance200 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption2.8 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
ColorMatte black
Weight158 g (5.6 oz)
Microphone diameter19 mm (0.75 in)
Capsule diameter19 mm (0.75 in)
Microphone length170 mm (6.7 in)
Maximum output voltage, RMS> 5 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Matching tolerance (frequency response and sensitivity)±1 dB
Phase deviation for kit< 10°

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.

View All

DPA

Recommended for You

Your recently viewed items