DPA d:sign™ 4018 Supercardioid Mic, Black

d:sign™

Gooseneck Microphone

Speech intelligibility - low noise

• Outstanding audio quality
• Wireless podium mic capability
• Highly directional – very isolated
• High rejection of radio frequency interference
• Sleek Scandinavian design

DPA gooseneck microphones have quickly become a very popular choice for podium mics as well as for conference room usage as either tabletop or ceiling mount.

These microphones have, on numerous occasions, been the preferred type to turn to when high speech intelligibility is paramount. This for instance is the fact at parliaments where multiple languages are to be simultaneous interpreted and the interpreters must catch every word and nuances of the spoken word and in a split second deliver the perfect translation.

In conference use, boardroom applications and videoconference situations the DPA mics gives you trouble-free installations and delivers pristine, clear sound.

The d:sign™ Gooseneck Microphone Series, contains specific mic solutions, mainly for the installation segment, from DPA's other microphone series.

d:sign™ 4018 Gooseneck Microphones

(This microphone was previously known as the d:dicate™ 4018 Cardioid Microphone.)

This solution uses the MMC4018 Cardioid Microphone Capsule, which has a highly-directional supercardioid pickup pattern with a smooth and uniform off-axis frequency response. The supercardioid shape is frequency independent, securing an identical sound color around the microphone. The usual rear lobe heard on most supercardioids is minimized on this capsule. This makes it much more isolated without sudden frequency dependent peaks and dips.

Due to its modular nature, the d:sign™ 4018 Supercardioid Microphone Boom can be combined with different lengths of podium booms – 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) make a high-quality stage voice mic together with our dedicated accessories.

d:sign™ 4018 Gooseneck Microphones come in five lengths:

• 20 cm (8 in), 32 cm (13 in) and 47 cm (18 in) boom intended for podium solutions
• 77 cm (30 in) and 122 cm (48 in) for floor stand applications

Specifications

• Directional pattern Supercardioid
• Principle of operation Pressure gradient
• Cartridge type Pre-polarized condenser
• Frequency range 20 Hz - 20 kHz
• Frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz - 18 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz 12 mV/Pa; -38.4 dB re. 1 V/Pa
• Equivalent noise level, A-weighted Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
• Equivalent noise level, ITU-R BS.468-4 Typ. 23 dB
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 78 dB(A)
• Total harmonic distortion (THD) < 1% up to 137 dB SPL peak
• Dynamic range Typ. 121 dB
• Max. SPL, peak before clipping 142 dB
• Output impedance 100 Ω
• Minimum load impedance 2 kΩ
• Cable drive capability 100 m (328 ft)
• Output balance principle Impedance balancing
• Common mode rejection ratio (CMRR) > 40 dB
• Power supply (for full performance) 48 V Phantom power (± 4 V)
• Current consumption 3.5 mA
• Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color Matte black
• Microphone diameter 19 mm (0.75 in)
• Capsule diameter 19 mm (0.75 in)
• Microphone length Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
• Maximum output voltage, RMS 2.2 V
• Polarity +V at pin 2 for positive sound pressure
• Temperature range -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH) Up to 90%
• Matching tolerance (frequency response and sensitivity) ±1 dB
• Phase deviation for kit < 10°

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.