DPA Mic Preamp

DPA Mic Preamp

Taxes and shipping calculated at checkout

Stock Notification

Get notified when this product is available again

Frequently Bought Together

Have a question?


Ultra-transparent, transformerless preamplifier with active drive for impedance balancing.
You can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series.

To learn more read our Microphone University article: Impedance balancing with Active Drive vs transformer coupled outputs.


Output connectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB8 Hz
Noise with shorted input A-weighted0.5 µV
Output voltage, RMS> 5 V
Output voltage, peak> 16 V
Type of electronic circuitActive
THD@1VRMS, 1kHz< 0.2 %
Dynamic range138 dB
Switchable attenuator, filters etc.0 dB, -20 dB
Output impedance< 200 ohm
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption2.8 mA
ColorMatte black
Weight140 g (4.9 oz)
Diameter19 mm (0.75 in)
Length147 mm (5.8 in)
Temperature range-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH)Up to 90 %

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.

View All


Recommended for You

Your recently viewed items