DPA Low Cut and High Boost Mic Preamp

DPA Low Cut and High Boost Mic Preamp

Price
$492.65
Taxes and shipping calculated at checkout

Stock Notification

Get notified when this product is available again

Frequently Bought Together

Have a question?

MMP-B MICROPHONE PREAMP, LOW CUT AND HIGH BOOST (MMP-B)

A preamplifier with low cut and high-boost filters. Features active drive for impedance balancing.
You can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series.

Specifications
accessories MMP-B MICROPHONE PREAMP, LOW CUT AND HIGH BOOST (MMP-B)

Output connectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Low-cut frequency, -3 dB50 Hz
Noise with shorted input A-weighted1.1 µV
Output voltage, RMS> 1.8 V
Output voltage, peak> 2.5 V
Type of electronic circuitActive
THD@1VRMS, 1kHz< 0.5 %
Dynamic range124 dB
Switchable attenuator, filters etc.High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance< 150 ohm
Cable drive capability100 m (328 ft)
Output balance principleSignal balanced
Common mode rejection ratio (CMRR)> 40 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption4.5 mA
ColorMatte black
Weight38 g (1.3 oz)
Diameter19 mm (0.75 in)
Length99 mm (3.9 in)
Temperature range-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH)Up to 90%

 

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.

View All

DPA

Recommended for You

Your recently viewed items