Lewitt LCT 940

Lewitt LCT 940

TUBE // WARM // RICH // NUANCED // CLEAR // FET
... an infinite number of microphones in a single housing
The LCT 940 combines a premium large-diaphragm FET condenser microphone and a top-notch tube microphone in a single housing. Choose between the two main settings of "TUBE" and "FET", or find your sweet spot in between - they are mixable at any possible ratio.

Specifications
Type
    Condenser, externally polarized
Acoustical operating principle
    Pressure gradient transducer
Transducer Ø
    25.4 mm, 1 in
Polar pattern
    Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns
Frequency range
    20 ... 20,000 Hz
Sensitivity
    23 mV/Pa, -33 dBV/Pa (cardioid)
    20 mV/Pa, -34 dBV/Pa (omni)
    23 mV/Pa, -33 dBV/Pa (figure-8)
Equivalent noise level (FET)
    8 dB (A), cardioid
    9 dB (A), omni
    8 dB (A), figure-8
Equivalent noise level (Tube)
    12 dB (A), cardioid
    13 dB (A), omni
    12 dB (A), figure-8
Max. SPL for 0.5 % THD (FET)
    143 dBSPL, 0 dB pre-attenuation
Max. SPL for 0.5% THD (Tube)
    140 dBSPL, 0 dB pre-attenuation
Signal / noise ratio (FET)
    86 dB (A)
Signal / noise ratio (Tube)
    82 dB (A)
Dynamic range of FET mic. Amp.
    135 dB
Dynamic range of Tube mic. Amp.
    128 dB
Pre-attenuation pad
     0 dB
    -6 dB
    -12 dB
    -18 dB
Low-cut filter
    linear
    40 Hz (12 dB/oct)
    150 Hz (6 dB/oct)
    300 Hz (6 dB/oct)
Internal impedance
    200 Ω
Rated load impedance
    1,000 Ω
PSU - supply voltage
    230 V, 50 Hz
    110 V, 60 Hz
Current consumption
    170 mA
Connector
    Gold plated 11-pin XLR
Microphone dimensions
    192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in
PSU dimensions
    250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in
Microphone net weight
    662 g, 23.3 oz
PSU net weight
    1930 g, 68.1 oz

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.