Welcome to TOT ALL Audio
{"id":4610143092782,"title":"REMIC REMIC W3000 G1\/WL Brass \u0026 Woodwind Mic. for Wireless Systems","handle":"remic-remic-w3000-g1-wl-brass-woodwind-mic-for-wireless-systems","description":"\u003ch1 class=\"product-title product_title entry-title\"\u003eREMIC W3000 G1\/WL Brass \u0026amp; Woodwind Mic. for Wireless Systems\u003c\/h1\u003e\n\u003cdiv class=\"is-divider small\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eNEW W3000 G1\/WL (Generation 1)\u003c\/strong\u003e\u003cbr\u003e Exceptional condenser microphone for brass and woodwind instruments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW OPTIMIZED FEATURES OF W3000 G1\/WL:\u003c\/strong\u003e\u003cbr\u003e – Optimized tonal transient response\u003cbr\u003e – Optimized mechanical grip\u003cbr\u003e – Optimized protection of diffusion filter\u003cbr\u003e – Optimized for balanced low impedance transformer inputs\u003c\/p\u003e\n\u003cp\u003eFor studio and live performance.\u003cbr\u003e Superior gain before feedback.\u003cbr\u003e Superior suppression of neighbor instruments and ambient noise.\u003c\/p\u003e\n\u003ch2\u003eREMIC W3000 G1\/WL Brass and Woodwind Mic. for Wireless Systems\u003c\/h2\u003e\n\u003cp\u003eDue to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eW3000 G1\/WL\u003c\/strong\u003e can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.\u003c\/p\u003e\n\u003cp\u003eThe REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.\u003c\/p\u003e\n\u003cp\u003eIn order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPPORTED WIRELESS TRANSMITTERS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHURE w\/TA4F Connector\u003c\/strong\u003e | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M\u003cbr\u003e \u003cstrong\u003eSHURE w\/3P LEMO Connector\u003c\/strong\u003e | UR1M\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENNHEISER w\/3.5 TRS Connector\u003c\/strong\u003e | SK100G3\/G4, SK300G3\/G4, SK500G3\/G4\u003cbr\u003e \u003cstrong\u003eSENNHEISER w\/LEMO-3 Connector\u003c\/strong\u003e | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000\u003c\/p\u003e\n\u003cp\u003ePlease note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eASTONISHING FEEDBACK SUPPRESSION\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eASTONISHING SOUND QUALITY\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eINNOVATIVE MOUNT\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content active\" id=\"tab-description\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003ch2\u003eREMIC W3000 G1\/WL Brass and Woodwind Mic. for Wireless Systems\u003c\/h2\u003e\n\u003cp\u003eDue to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eW3000 G1\/WL\u003c\/strong\u003e can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.\u003c\/p\u003e\n\u003cp\u003eThe REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.\u003c\/p\u003e\n\u003cp\u003eIn order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPPORTED WIRELESS TRANSMITTERS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHURE w\/TA4F Connector\u003c\/strong\u003e | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M\u003cbr\u003e \u003cstrong\u003eSHURE w\/3P LEMO Connector\u003c\/strong\u003e | UR1M\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENNHEISER w\/3.5 TRS Connector\u003c\/strong\u003e | SK100G3\/G4, SK300G3\/G4, SK500G3\/G4\u003cbr\u003e \u003cstrong\u003eSENNHEISER w\/LEMO-3 Connector\u003c\/strong\u003e | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000\u003c\/p\u003e\n\u003cp\u003ePlease note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eABOUT THE W3000 G1\/WL\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is specially designed for brass \u0026amp; woodwind instruments and can be used in any type of live, studio, theatre and broadcast production, and delivers a natural sound response while offering a high suppression of ambient sound sources.\u003c\/p\u003e\n\u003cp\u003eSo if you need a microphone with a natural sound and low acoustic feedback response, the \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is the answer.\u003c\/p\u003e\n\u003cp\u003eThe microphone housing of the \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is made of black natural rubber to ensure fast, flexible and reliable mounting and comes with a 4mm cotton woven MOGAMI cable with a length of 2 meters. The microphone can easily be mounted on the bell of the instrument, pointing towards the neck and top valves. This position ensures a fine interaction between the fundamental- and overtone- register of the instrument.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eREMIC W3000\u003c\/strong\u003e \u003cstrong\u003eG1\/WL\u003c\/strong\u003e is suitable for brass and woodwind instruments such as; saxophone, trumpet, french horn, flugelhorn, cornet, sax horn, tuba, trombone, tenor horn, baritone horn, euphonium and any related brass or woodwind instruments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSTATEMENTS\u003c\/h3\u003e\n\u003ch5\u003e(All statements are about the previous version W3000)\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePhilip Daveby\u003c\/strong\u003e\u003cbr\u003e ”I’m really thrilled about the Remic W3000! This is a top of the line microphone with a fantastic natural sound. I love how it makes me sound really great and at the same time is very tiny and sits perfectly on my horn. The way it allows me to move around on stage and in the audience without worrying about feedback is incredible and will definitely make my playing easier and more fun.” – Philip Daveby – saxophone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJonne Bentlöv\u003c\/strong\u003e\u003cbr\u003e “The Remic W3000 is simply one of the finest clip mics I have tried so far. Apart from the rich and natural sound, it also has great isolation wich makes it easier to control in the mix and perfect for using with electronics, preventing leaking from other sounds on stage.” – Jonne Bentlöv – trumpet (Bo Kaspers Orkester, First Aid Kit, Andreas Moe)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePamela Williams\u003c\/strong\u003e\u003cbr\u003e “I tried the mic plugged directly into a mixer and it sounds fantastic! I also plugged it into my digital audio recording program and it sounds very clean and bright and projected a nice tone from my sax.“ – Pamela Williams – saxophone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaroline Toftild\u003c\/strong\u003e\u003cbr\u003e “My first impression of the REMIC W3000 microphone is extremely positive – An excellent microphone – Clear and beautiful sound – The REMIC W3000 is very well designed and extremely easy to mount and unmount – even during a live gig” – Caroline Toftild – trumpet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJens Dandanell\u003c\/strong\u003e\u003cbr\u003e “Remic totally rethinks instrument-micing. Unbelievable combination of clarity and isolation from the rest of the stage sounds.” – Jens Dandanell – FOH (FLOD)\u003c\/p\u003e\n\u003cp\u003eAny publication of REMIC MICROPHONES on this website may include technical inaccuracies or typografical erros. Changes may frequently be made to these publications.\u003c\/p\u003e\n\u003cp\u003eAll products and publications of REMIC MICROPHONES are subject to change without notice.\u003c\/p\u003e\n\u003cp\u003eAll products of REMIC MICROPHONES including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-10T16:59:33+02:00","created_at":"2020-07-10T16:59:32+02:00","vendor":"REMIC","type":"Woodwinds Microphones","tags":["Microphones for Wireless Systems","REMIC","Woodwinds Microphones"],"price":70000,"price_min":70000,"price_max":70000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32471342743598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3000-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"REMIC REMIC W3000 G1\/WL Brass \u0026 Woodwind Mic. for Wireless Systems","public_title":null,"options":["Default Title"],"price":70000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/REMIc-W3000-G1for-brass-and-woodwinds.jpg?v=1594393241","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-profile-3_59bedfe0-ed47-4af0-9e0a-4f91c19750cd.jpg?v=1594393241","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/IMG_3688-2_a989a3ba-6de2-4af6-b4ae-5b2bbb8fed06.jpg?v=1594393265","\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-edited.jpg?v=1594393277"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/REMIc-W3000-G1for-brass-and-woodwinds.jpg?v=1594393241","options":["Title"],"media":[{"alt":null,"id":6990968258606,"position":1,"preview_image":{"aspect_ratio":0.949,"height":628,"width":596,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/REMIc-W3000-G1for-brass-and-woodwinds.jpg?v=1594393241"},"aspect_ratio":0.949,"height":628,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/REMIc-W3000-G1for-brass-and-woodwinds.jpg?v=1594393241","width":596},{"alt":null,"id":6990967341102,"position":2,"preview_image":{"aspect_ratio":1.0,"height":628,"width":628,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-profile-3_59bedfe0-ed47-4af0-9e0a-4f91c19750cd.jpg?v=1594393241"},"aspect_ratio":1.0,"height":628,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-profile-3_59bedfe0-ed47-4af0-9e0a-4f91c19750cd.jpg?v=1594393241","width":628},{"alt":null,"id":6990971306030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":628,"width":628,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/IMG_3688-2_a989a3ba-6de2-4af6-b4ae-5b2bbb8fed06.jpg?v=1594393265"},"aspect_ratio":1.0,"height":628,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/IMG_3688-2_a989a3ba-6de2-4af6-b4ae-5b2bbb8fed06.jpg?v=1594393265","width":628},{"alt":null,"id":6990971699246,"position":4,"preview_image":{"aspect_ratio":0.949,"height":628,"width":596,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-edited.jpg?v=1594393277"},"aspect_ratio":0.949,"height":628,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/W3000-G1-edited.jpg?v=1594393277","width":596}],"content":"\u003ch1 class=\"product-title product_title entry-title\"\u003eREMIC W3000 G1\/WL Brass \u0026amp; Woodwind Mic. for Wireless Systems\u003c\/h1\u003e\n\u003cdiv class=\"is-divider small\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eNEW W3000 G1\/WL (Generation 1)\u003c\/strong\u003e\u003cbr\u003e Exceptional condenser microphone for brass and woodwind instruments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNEW OPTIMIZED FEATURES OF W3000 G1\/WL:\u003c\/strong\u003e\u003cbr\u003e – Optimized tonal transient response\u003cbr\u003e – Optimized mechanical grip\u003cbr\u003e – Optimized protection of diffusion filter\u003cbr\u003e – Optimized for balanced low impedance transformer inputs\u003c\/p\u003e\n\u003cp\u003eFor studio and live performance.\u003cbr\u003e Superior gain before feedback.\u003cbr\u003e Superior suppression of neighbor instruments and ambient noise.\u003c\/p\u003e\n\u003ch2\u003eREMIC W3000 G1\/WL Brass and Woodwind Mic. for Wireless Systems\u003c\/h2\u003e\n\u003cp\u003eDue to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eW3000 G1\/WL\u003c\/strong\u003e can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.\u003c\/p\u003e\n\u003cp\u003eThe REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.\u003c\/p\u003e\n\u003cp\u003eIn order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPPORTED WIRELESS TRANSMITTERS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHURE w\/TA4F Connector\u003c\/strong\u003e | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M\u003cbr\u003e \u003cstrong\u003eSHURE w\/3P LEMO Connector\u003c\/strong\u003e | UR1M\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENNHEISER w\/3.5 TRS Connector\u003c\/strong\u003e | SK100G3\/G4, SK300G3\/G4, SK500G3\/G4\u003cbr\u003e \u003cstrong\u003eSENNHEISER w\/LEMO-3 Connector\u003c\/strong\u003e | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000\u003c\/p\u003e\n\u003cp\u003ePlease note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eASTONISHING FEEDBACK SUPPRESSION\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eASTONISHING SOUND QUALITY\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eINNOVATIVE MOUNT\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content active\" id=\"tab-description\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003ch2\u003eREMIC W3000 G1\/WL Brass and Woodwind Mic. for Wireless Systems\u003c\/h2\u003e\n\u003cp\u003eDue to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eW3000 G1\/WL\u003c\/strong\u003e can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.\u003c\/p\u003e\n\u003cp\u003eThe REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.\u003c\/p\u003e\n\u003cp\u003eIn order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPPORTED WIRELESS TRANSMITTERS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHURE w\/TA4F Connector\u003c\/strong\u003e | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M\u003cbr\u003e \u003cstrong\u003eSHURE w\/3P LEMO Connector\u003c\/strong\u003e | UR1M\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSENNHEISER w\/3.5 TRS Connector\u003c\/strong\u003e | SK100G3\/G4, SK300G3\/G4, SK500G3\/G4\u003cbr\u003e \u003cstrong\u003eSENNHEISER w\/LEMO-3 Connector\u003c\/strong\u003e | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000\u003c\/p\u003e\n\u003cp\u003ePlease note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eABOUT THE W3000 G1\/WL\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is specially designed for brass \u0026amp; woodwind instruments and can be used in any type of live, studio, theatre and broadcast production, and delivers a natural sound response while offering a high suppression of ambient sound sources.\u003c\/p\u003e\n\u003cp\u003eSo if you need a microphone with a natural sound and low acoustic feedback response, the \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is the answer.\u003c\/p\u003e\n\u003cp\u003eThe microphone housing of the \u003cstrong\u003eREMIC W3000 G1\/WL\u003c\/strong\u003e is made of black natural rubber to ensure fast, flexible and reliable mounting and comes with a 4mm cotton woven MOGAMI cable with a length of 2 meters. The microphone can easily be mounted on the bell of the instrument, pointing towards the neck and top valves. This position ensures a fine interaction between the fundamental- and overtone- register of the instrument.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eREMIC W3000\u003c\/strong\u003e \u003cstrong\u003eG1\/WL\u003c\/strong\u003e is suitable for brass and woodwind instruments such as; saxophone, trumpet, french horn, flugelhorn, cornet, sax horn, tuba, trombone, tenor horn, baritone horn, euphonium and any related brass or woodwind instruments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSTATEMENTS\u003c\/h3\u003e\n\u003ch5\u003e(All statements are about the previous version W3000)\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePhilip Daveby\u003c\/strong\u003e\u003cbr\u003e ”I’m really thrilled about the Remic W3000! This is a top of the line microphone with a fantastic natural sound. I love how it makes me sound really great and at the same time is very tiny and sits perfectly on my horn. The way it allows me to move around on stage and in the audience without worrying about feedback is incredible and will definitely make my playing easier and more fun.” – Philip Daveby – saxophone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJonne Bentlöv\u003c\/strong\u003e\u003cbr\u003e “The Remic W3000 is simply one of the finest clip mics I have tried so far. Apart from the rich and natural sound, it also has great isolation wich makes it easier to control in the mix and perfect for using with electronics, preventing leaking from other sounds on stage.” – Jonne Bentlöv – trumpet (Bo Kaspers Orkester, First Aid Kit, Andreas Moe)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePamela Williams\u003c\/strong\u003e\u003cbr\u003e “I tried the mic plugged directly into a mixer and it sounds fantastic! I also plugged it into my digital audio recording program and it sounds very clean and bright and projected a nice tone from my sax.“ – Pamela Williams – saxophone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCaroline Toftild\u003c\/strong\u003e\u003cbr\u003e “My first impression of the REMIC W3000 microphone is extremely positive – An excellent microphone – Clear and beautiful sound – The REMIC W3000 is very well designed and extremely easy to mount and unmount – even during a live gig” – Caroline Toftild – trumpet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJens Dandanell\u003c\/strong\u003e\u003cbr\u003e “Remic totally rethinks instrument-micing. Unbelievable combination of clarity and isolation from the rest of the stage sounds.” – Jens Dandanell – FOH (FLOD)\u003c\/p\u003e\n\u003cp\u003eAny publication of REMIC MICROPHONES on this website may include technical inaccuracies or typografical erros. Changes may frequently be made to these publications.\u003c\/p\u003e\n\u003cp\u003eAll products and publications of REMIC MICROPHONES are subject to change without notice.\u003c\/p\u003e\n\u003cp\u003eAll products of REMIC MICROPHONES including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

REMIC REMIC W3000 G1/WL Brass & Woodwind Mic. for Wireless Systems

Product Description
$700.00
Maximum quantity available reached.

REMIC W3000 G1/WL Brass & Woodwind Mic. for Wireless Systems


NEW W3000 G1/WL (Generation 1)
Exceptional condenser microphone for brass and woodwind instruments.

NEW OPTIMIZED FEATURES OF W3000 G1/WL:
– Optimized tonal transient response
– Optimized mechanical grip
– Optimized protection of diffusion filter
– Optimized for balanced low impedance transformer inputs

For studio and live performance.
Superior gain before feedback.
Superior suppression of neighbor instruments and ambient noise.

REMIC W3000 G1/WL Brass and Woodwind Mic. for Wireless Systems

Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

The W3000 G1/WL can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.

The REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.

In order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:

SUPPORTED WIRELESS TRANSMITTERS:

SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M

SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

 

  • ASTONISHING FEEDBACK SUPPRESSION
  • ASTONISHING SOUND QUALITY
  • INNOVATIVE MOUNT

REMIC W3000 G1/WL Brass and Woodwind Mic. for Wireless Systems

Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

The W3000 G1/WL can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.

The REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.

In order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:

SUPPORTED WIRELESS TRANSMITTERS:

SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M

SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

ABOUT THE W3000 G1/WL

The REMIC W3000 G1/WL is specially designed for brass & woodwind instruments and can be used in any type of live, studio, theatre and broadcast production, and delivers a natural sound response while offering a high suppression of ambient sound sources.

So if you need a microphone with a natural sound and low acoustic feedback response, the REMIC W3000 G1/WL is the answer.

The microphone housing of the REMIC W3000 G1/WL is made of black natural rubber to ensure fast, flexible and reliable mounting and comes with a 4mm cotton woven MOGAMI cable with a length of 2 meters. The microphone can easily be mounted on the bell of the instrument, pointing towards the neck and top valves. This position ensures a fine interaction between the fundamental- and overtone- register of the instrument.

The REMIC W3000 G1/WL is suitable for brass and woodwind instruments such as; saxophone, trumpet, french horn, flugelhorn, cornet, sax horn, tuba, trombone, tenor horn, baritone horn, euphonium and any related brass or woodwind instruments.

 

STATEMENTS

(All statements are about the previous version W3000)

Philip Daveby
”I’m really thrilled about the Remic W3000! This is a top of the line microphone with a fantastic natural sound. I love how it makes me sound really great and at the same time is very tiny and sits perfectly on my horn. The way it allows me to move around on stage and in the audience without worrying about feedback is incredible and will definitely make my playing easier and more fun.” – Philip Daveby – saxophone

Jonne Bentlöv
“The Remic W3000 is simply one of the finest clip mics I have tried so far. Apart from the rich and natural sound, it also has great isolation wich makes it easier to control in the mix and perfect for using with electronics, preventing leaking from other sounds on stage.” – Jonne Bentlöv – trumpet (Bo Kaspers Orkester, First Aid Kit, Andreas Moe)

Pamela Williams
“I tried the mic plugged directly into a mixer and it sounds fantastic! I also plugged it into my digital audio recording program and it sounds very clean and bright and projected a nice tone from my sax.“ – Pamela Williams – saxophone

Caroline Toftild
“My first impression of the REMIC W3000 microphone is extremely positive – An excellent microphone – Clear and beautiful sound – The REMIC W3000 is very well designed and extremely easy to mount and unmount – even during a live gig” – Caroline Toftild – trumpet

Jens Dandanell
“Remic totally rethinks instrument-micing. Unbelievable combination of clarity and isolation from the rest of the stage sounds.” – Jens Dandanell – FOH (FLOD)

Any publication of REMIC MICROPHONES on this website may include technical inaccuracies or typografical erros. Changes may frequently be made to these publications.

All products and publications of REMIC MICROPHONES are subject to change without notice.

All products of REMIC MICROPHONES including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.

Sku: 3000-1
Vendor: REMIC

Related products