RØDE Microphones - M3

RØDE Microphones - M3

•     Heavy duty metal body
•     Internal capsule shock mount
•     High level of RF rejection
•     On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
•     Heat-treated high-strength mesh head
•     Battery status indicator
•     9V Battery Power, 24 or 48V Phantom Power
•     Includes wind shield, mic clip and zip pouch
•     10 year extended warranty when you register your microphone

The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.

A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.

The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

M3 Specifications
Acoustic Principle    Pressure Gradient
Active Electronics    JFET impedance converter with bipolar output buffer
Capsule    0.50"
Address Type    End
Frequency Range    40Hz - 20kHz (selected HPF @80Hz)
Output Impedance    200Ω
Maximum SPL    142dBSPL
Maximum Output Level    9.2mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    21dBA
Weight     390.00g
Dimensions    225.00mmH x 33.00mmW x 33.00mmD
Warranty     1 year with free extension to 10 years 

Shipping costs are calculated at time of checkout by our shopping cart, based on the weight of your order and the method of shipment.