{"id":799258509358,"title":"STAX SRM-007tⅡ","handle":"stax-srm-007t","description":"●We’ve taken another look at circuit constants and achieved a higher grade of reproducibility for SACD and other new-generation audio formats.\u003cbr\u003e\u003cbr\u003e●Consists of a pure balance amplifier in which the XLR balance input does not have to pass through a transformer, an inversion amplifier, etc.\u003cbr\u003e\u003cbr\u003e●Makes use of a simple two-stage amplification structure based on rigorously selected low-noise FET. The load resistance makes use of non-inductive coil resistance manufactured by Dale, thus realizing straightforward properties that take advantage of the features of vacuum tubes and outstanding sound quality with a high level of clarity.\u003cbr\u003e\u003cbr\u003e●The output stage is designed to lower impedance by using a rigorously selected high voltage dual triode (6FQ7 type) in parallel connection, which has resulted in an improvement in dynamic range especially in the high frequency.\u003cbr\u003e\u003cbr\u003e●The heater power source for the vacuum tube makes use of a power circuit of the DC ignition type using an electrolytic condenser and a high-speed Schottky barrier diode, bringing about further improvements in the SN ratio.\u003cbr\u003e\u003cbr\u003e●Makes use of a large-capacity power transformer and capacitor.\u003cbr\u003e\u003cbr\u003e●Equipped with one XLR (balance) input system and two RCA (imbalance) input systems, meaning that there is a total of three input systems.\u003cbr\u003e\u003cbr\u003e●In the case of the RCA input, switching with the earth side ensures that there is almost no interference between devices.\u003cbr\u003e\u003cbr\u003e●Use is made of a high sound quality quadruple volume unit which makes possible XLR input as well as all kinds of line level analog voice inputs.\u003cbr\u003e\u003cbr\u003e●The RCA terminal “Input 1” is equipped with parallel output terminals and enables input throughout. Connection with other pre-amplifiers and recording decks, etc., is also possible.\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e ✓ Vacuum tubes:6FQ7\/6CG7 type x 4\u003cbr\u003e ✓ Frequency response:DC-100 KHz \/ +0, -1.5 dB SR-007 or SR-404 Signature, when using 1 unit\u003cbr\u003e ✓ Rated input level:200 mV \/ 100 V Outputs\u003cbr\u003e ✓ Maximum input level:30 V r.m.s. \/ at Minimum volume\u003cbr\u003e ✓ Amplification:54 dB (x 500)\u003cbr\u003e ✓ Total harmonic distortion:0.01% \/ 1 KHz, 100 V r.m.s. output SR-007 or SR-404 Signature, when using 1 unit\u003cbr\u003e ✓ Input impedance:50 KΩ \/ XLR balance 50KΩ×2\u003cbr\u003e ✓ Number of inputs:RCA×2, XLR×1 (balanced)\u003cbr\u003e ✓ Maximum output voltage:340 V r.m.s. \/ 1 KHz\u003cbr\u003e ✓ Standard bias voltage:DC 580 V\u003cbr\u003e ✓ Power voltage:120-240V ±10%, 50 to 60 Hz (adjusted for your area)\u003cbr\u003e ✓ Power consumption:55 W\u003cbr\u003e ✓ Temperature range for use:Between 0º and 35ºC, max. 90% (no condensation)\u003cbr\u003e ✓ External dimensions:195 (w) x 103 (h) x 420 (d) mm (including VR knob and pin jack (20 + 10)\u003cbr\u003e ✓ Weight:4.7 Kg","published_at":"2018-09-11T03:15:29+02:00","created_at":"2018-09-11T03:34:30+02:00","vendor":"STAX","type":"Headphone Amplifier","tags":["Headphone Amplifiers \u0026 Distribution","Price Range_$1500 to $2000","Shop by brand_STAX","Shop by category_Headphone Amplifiers \u0026 Distribution","Shop by category_Studio \u0026 Recording","Shop by category_Studio Monitors","STAX","Studio \u0026 Recording","Studio Monitors"],"price":178000,"price_min":178000,"price_max":178000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8420549951534,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SRM007tⅡ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STAX SRM-007tⅡ","public_title":null,"options":["Default Title"],"price":178000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SRM-007tII.jpg?v=1536630725"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0292\/6125\/products\/SRM-007tII.jpg?v=1536630725","options":["Title"],"content":"●We’ve taken another look at circuit constants and achieved a higher grade of reproducibility for SACD and other new-generation audio formats.\u003cbr\u003e\u003cbr\u003e●Consists of a pure balance amplifier in which the XLR balance input does not have to pass through a transformer, an inversion amplifier, etc.\u003cbr\u003e\u003cbr\u003e●Makes use of a simple two-stage amplification structure based on rigorously selected low-noise FET. The load resistance makes use of non-inductive coil resistance manufactured by Dale, thus realizing straightforward properties that take advantage of the features of vacuum tubes and outstanding sound quality with a high level of clarity.\u003cbr\u003e\u003cbr\u003e●The output stage is designed to lower impedance by using a rigorously selected high voltage dual triode (6FQ7 type) in parallel connection, which has resulted in an improvement in dynamic range especially in the high frequency.\u003cbr\u003e\u003cbr\u003e●The heater power source for the vacuum tube makes use of a power circuit of the DC ignition type using an electrolytic condenser and a high-speed Schottky barrier diode, bringing about further improvements in the SN ratio.\u003cbr\u003e\u003cbr\u003e●Makes use of a large-capacity power transformer and capacitor.\u003cbr\u003e\u003cbr\u003e●Equipped with one XLR (balance) input system and two RCA (imbalance) input systems, meaning that there is a total of three input systems.\u003cbr\u003e\u003cbr\u003e●In the case of the RCA input, switching with the earth side ensures that there is almost no interference between devices.\u003cbr\u003e\u003cbr\u003e●Use is made of a high sound quality quadruple volume unit which makes possible XLR input as well as all kinds of line level analog voice inputs.\u003cbr\u003e\u003cbr\u003e●The RCA terminal “Input 1” is equipped with parallel output terminals and enables input throughout. Connection with other pre-amplifiers and recording decks, etc., is also possible.\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e ✓ Vacuum tubes:6FQ7\/6CG7 type x 4\u003cbr\u003e ✓ Frequency response:DC-100 KHz \/ +0, -1.5 dB SR-007 or SR-404 Signature, when using 1 unit\u003cbr\u003e ✓ Rated input level:200 mV \/ 100 V Outputs\u003cbr\u003e ✓ Maximum input level:30 V r.m.s. \/ at Minimum volume\u003cbr\u003e ✓ Amplification:54 dB (x 500)\u003cbr\u003e ✓ Total harmonic distortion:0.01% \/ 1 KHz, 100 V r.m.s. output SR-007 or SR-404 Signature, when using 1 unit\u003cbr\u003e ✓ Input impedance:50 KΩ \/ XLR balance 50KΩ×2\u003cbr\u003e ✓ Number of inputs:RCA×2, XLR×1 (balanced)\u003cbr\u003e ✓ Maximum output voltage:340 V r.m.s. \/ 1 KHz\u003cbr\u003e ✓ Standard bias voltage:DC 580 V\u003cbr\u003e ✓ Power voltage:120-240V ±10%, 50 to 60 Hz (adjusted for your area)\u003cbr\u003e ✓ Power consumption:55 W\u003cbr\u003e ✓ Temperature range for use:Between 0º and 35ºC, max. 90% (no condensation)\u003cbr\u003e ✓ External dimensions:195 (w) x 103 (h) x 420 (d) mm (including VR knob and pin jack (20 + 10)\u003cbr\u003e ✓ Weight:4.7 Kg"}

STAX SRM-007tⅡ

Product Description
$1,780.00
Maximum quantity available reached.
●We’ve taken another look at circuit constants and achieved a higher grade of reproducibility for SACD and other new-generation audio formats.

●Consists of a pure balance amplifier in which the XLR balance input does not have to pass through a transformer, an inversion amplifier, etc.

●Makes use of a simple two-stage amplification structure based on rigorously selected low-noise FET. The load resistance makes use of non-inductive coil resistance manufactured by Dale, thus realizing straightforward properties that take advantage of the features of vacuum tubes and outstanding sound quality with a high level of clarity.

●The output stage is designed to lower impedance by using a rigorously selected high voltage dual triode (6FQ7 type) in parallel connection, which has resulted in an improvement in dynamic range especially in the high frequency.

●The heater power source for the vacuum tube makes use of a power circuit of the DC ignition type using an electrolytic condenser and a high-speed Schottky barrier diode, bringing about further improvements in the SN ratio.

●Makes use of a large-capacity power transformer and capacitor.

●Equipped with one XLR (balance) input system and two RCA (imbalance) input systems, meaning that there is a total of three input systems.

●In the case of the RCA input, switching with the earth side ensures that there is almost no interference between devices.

●Use is made of a high sound quality quadruple volume unit which makes possible XLR input as well as all kinds of line level analog voice inputs.

●The RCA terminal “Input 1” is equipped with parallel output terminals and enables input throughout. Connection with other pre-amplifiers and recording decks, etc., is also possible.

Specification
✓ Vacuum tubes:6FQ7/6CG7 type x 4
✓ Frequency response:DC-100 KHz / +0, -1.5 dB SR-007 or SR-404 Signature, when using 1 unit
✓ Rated input level:200 mV / 100 V Outputs
✓ Maximum input level:30 V r.m.s. / at Minimum volume
✓ Amplification:54 dB (x 500)
✓ Total harmonic distortion:0.01% / 1 KHz, 100 V r.m.s. output SR-007 or SR-404 Signature, when using 1 unit
✓ Input impedance:50 KΩ / XLR balance 50KΩ×2
✓ Number of inputs:RCA×2, XLR×1 (balanced)
✓ Maximum output voltage:340 V r.m.s. / 1 KHz
✓ Standard bias voltage:DC 580 V
✓ Power voltage:120-240V ±10%, 50 to 60 Hz (adjusted for your area)
✓ Power consumption:55 W
✓ Temperature range for use:Between 0º and 35ºC, max. 90% (no condensation)
✓ External dimensions:195 (w) x 103 (h) x 420 (d) mm (including VR knob and pin jack (20 + 10)
✓ Weight:4.7 Kg
Sku: SRM007tⅡ
Vendor: STAX

Related Products